1-(3-甲氧基苯基)乙醇 | 23308-82-9

• 物质功能分类: 有机原料 - 醇、酚、酚醇类化合物及衍生物
• 分子结构分类: 有机化合物 - 苯类化合物 - 苯酚醚
• 中文名称: 1-(3-甲氧基苯基)乙醇
• 中文别名: 1-(3-甲氧基苯基)-乙醇
• 英文名称: 1-(3-methoxy)-phenylethanol
• 英文别名: 3'-methoxy-1-phenylethanol；1-(3-methoxyphenyl)ethan-1-ol；1-(3-Methoxyphenyl)ethanol
• CAS: 23308-82-9
• 化学式: C₉H₁₂O₂
• mdl: MFCD00021866
• 分子量: 152.193
• InChiKey: ZUBPFBWAXNCEOG-UHFFFAOYSA-N

物化性质

• 沸点：
  234.66°C (rough estimate)
• 密度：
  1.0781
• 溶解度：
  氯仿（微溶）、乙酸乙酯（微溶）、甲醇（微溶）

计算性质

• 辛醇/水分配系数(LogP)：
  1.8
• 重原子数：
  11
• 可旋转键数：
  2
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.333
• 拓扑面积：
  29.5
• 氢给体数：
  1
• 氢受体数：
  2

安全信息

• 安全说明：
  S26,S36/37/39
• 海关编码：
  2909499000
• 危险类别码：
  R36/37/38
• 危险性防范说明：
  P280,P305+P351+P338
• 危险性描述：
  H302
• 储存条件：
  室温且干燥环境下使用。

SDS

Material Safety Data Sheet

---

Section 1. Identification of the substance
Product Name: 1-(3-Methoxyphenyl)ethanol
Synonyms:

---

Section 2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.

---

Section 3. Composition/information on ingredients.
Ingredient name: 1-(3-Methoxyphenyl)ethanol
CAS number: 23308-82-9

---

Section 4. First aid measures
Skin contact: Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact: Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion: Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

---

Section 5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

---

Section 6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution: Wear approved mask/respirator
Hand precaution: Wear suitable gloves/gauntlets
Skin protection: Wear suitable protective clothing
Eye protection: Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

---

Section 7. Handling and storage
Handling: This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Store in closed vessels.
Storage:

---

Section 8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

---

Section 9. Physical and chemical properties
Appearance: Not specified
Boiling point: No data
No data
Melting point:
Flash point: No data
Density: No data
Molecular formula: C9H12O2
Molecular weight: 152.2

---

Section 10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide.

---

Section 11. Toxicological information
No data.

---

Section 12. Ecological information
No data.

---

Section 13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

---

Section 14. Transportation information
Non-harzardous for air and ground transportation.

---

Section 15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  1-(3-甲氧基苯基)乙醇 在 盐酸 、 4-二甲氨基吡啶 、 水 、 氢溴酸 、 甲基磺酰氯 、 三乙胺 、 potassium hydroxide 作用下， 以 二氯甲烷 、 水 、 乙酸乙酯 为溶剂， 反应 4.17h， 生成 3-(1-(S)-(N,N-二甲基氨基)乙基)苯酚
  参考文献：
  名称：

  SYNTHESIS OF NOVEL INTERMEDIATE(S) FOR PREPARING RIVASTIGMINE

  摘要：

  本发明涉及新型中间体，该中间体对于制备化合物Rivastigmine的公式（I）及其药用可接受的盐是有用的。本发明还涉及制备这种新型中间体的方法以及使用这种新型中间体制备Rivastigmine的方法。

  公开号：

  US20200095195A1
• 作为产物：
  描述：

  在 水 、 sodium hydroxide 作用下， 以 四氢呋喃 、 甲醇 为溶剂， 以87%的产率得到1-(3-甲氧基苯基)乙醇
  参考文献：
  名称：

  含锰配合物的苯并咪唑片段催化酮和腈的氢化硅烷化

  摘要：

  报道了一种新的双齿（NN）-Mn（I）配合物的合成，并研究了其对酮和腈还原的催化活性。在比较苯并咪唑配体负载的其他各种Mn（I）配合物的反应性时，观察到带有6-甲基吡啶和苯并咪唑片段的Mn（I）配合物对酮的单氢化硅烷化和腈的二氢化硅烷化表现出最高的催化活性。使用该方案，将广泛的酮选择性地还原为相应的甲硅烷基醚。在不饱和酮的情况下，观察到羰基在烯烃键上的化学选择性还原。另外，使用该配合物还实现了几个腈的选择性二氢硅烷化。用自由基清除剂进行的机械研究表明，在催化反应过程中自由基种类的参与。Mn（I）配合物与苯基硅烷的化学计量反应揭示了新的Mn（I）配合物的形成。

  DOI：

  10.1016/j.tet.2020.131439

文献信息

• [EN] 2,4-DIAMINOQUINAZOLINES FOR SPINAL MUSCULAR ATROPHY<br/>[FR] 2,4-DIAMINOQUINAZOLINES UTILES POUR LE TRAITEMENT D'UNE ATROPHIE MUSCULAIRE SPINALE
  申请人：DECODE CHEMISTRY INC

  公开号：WO2005123724A1

  公开（公告）日：2005-12-29

  2,4-Diaminoquinazolines of formulae I-IV and VI (I, II, III, IV and VI) are useful for treating spinal muscular atrophy (SMA).

  2,4-二氨基喹唑啉的化学式I-IV和VI（I，II，III，IV和VI）可用于治疗脊髓性肌萎缩症（SMA）。
• Metal–Organic Framework Based on Heptanuclear Cu–O Clusters and Its Application as a Recyclable Photocatalyst for Stepwise Selective Catalysis
  作者：Jie Zhou、Xu Huang-Fu、Yang-Ying Huang、Chu-Ning Cao、Jie Han、Xiao-Li Zhao、Xu-Dong Chen

  DOI：10.1021/acs.inorgchem.9b02084

  日期：2020.1.6

  photocatalysts, a family of three copper(II) coordination polymers bearing different Cu-O assemblies have been synthesized with the ligand 4,4'-disulfo-[1,1'-biphenyl]-2,2'-dicarboxylate acid (H4DSDC), namely, [Cu7(DSDC)2(OH)6(H2O)10]·xH2O}n (1), [Cu4(DSDC)(4,4'-bpy)2(OH)4]·2H2O}n (2), and Cu2(DSDC)(phen)2(H2O)2}n (3) (4,4'-bpy = 4,4'-bipyridine and phen = 1,10-phenanthroline). Complex 1 represents a metal-organic

  使用金属有机骨架（MOF）作为催化剂的可见光驱动的光反应就其环境友好特性（如使用可见光的可再生和可持续能源以及潜在的催化剂可回收性）而言，前景广阔。为了开发潜在的多相光催化剂，已经合成了带有不同Cu-O组装体的三种铜（II）配位聚合物，其配体为4,4'-二磺基-[1,1'-联苯] -2,2'-二羧酸酯酸（H4DSDC），即[Cu7（DSDC）2（OH）6（H2O）10]·x } n（1），[Cu4（DSDC）（4,4'-bpy）2（OH）4 ]·2 } n（2）和Cu2（DSDC）（phen）2（ ）2} n（3）（4,4'-bpy = 4,4'-联吡啶和phen = 1,10-菲咯啉）。配合物1代表具有NbO型拓扑结构的金属-有机骨架，该拓扑结构是通过去质子化DSDC4-配体由庚核[Cu7（μ3-OH）6（ ）10] 8+团簇的无限连接构成的，该结构包括ab的一维六
• The oxidation of alcohols with O-iodoxybenzoic acid (IBX) in aqueous nanomicelles at room temperature
  作者：Aming Xie、Xiangxiang Zhou、Liandong Feng、Xinyu Hu、Wei Dong

  DOI：10.1016/j.tet.2014.03.047

  日期：2014.5

  GMPGS-2000, a nonionic amphiphile composed of Guerbet alcohol (2-octyldodecan-1-ol), MPEG-2000 and succinic acid, has been prepared as an effective nanomicelle forming species for the oxidation of alcohols with 2-iodoxybenzoic acid (IBX) in water at room temperature.

  GMPGS-2000是由Guerbet醇（2-辛基十二烷基-1-醇），MPEG-2000和琥珀酸组成的非离子两亲物，已被制备为有效的形成纳米胶束的物质，用于用2-碘氧基苯甲酸（IBX）氧化醇在室温下的水中。
• Manganese(I)-Catalyzed Transfer Hydrogenation and Acceptorless Dehydrogenative Condensation: Promotional Influence of the Uncoordinated N-Heterocycle
  作者：Chong Zhang、Bowen Hu、Dafa Chen、Haiping Xia

  DOI：10.1021/acs.organomet.9b00475

  日期：2019.8.26

  showed the highest activity. The reactions proceeded well with 0.5 mol % of catalyst loading and 20 mol % of t-BuOK at 85 °C for 24 h. Furthermore, 3 was also used as a catalyst for the synthesis of primary alcohols via transfer hydrogenation of aldehydes and the synthesis of 1,2-disubstituted benzimidazoles and quinolines via acceptorless dehydrogenative condensations.

  四种二齿锰（I）配合物[（C 5 H 4 N-C 5 H 3 N-OH）Mn（CO）3 Br]（1），[（C 9 H 6 N-C 5 H 3 N-OH）Mn（CO ）3 Br]（2），[（C 8 H 5 N 2 -C 5 H 3 N-OH）Mn（CO）3 Br]（3）和[（C 8 H 5 N 2 -C 5 H 3 N-OCH 3）Mn（CO）3Br]（4）被合成。测试了这些配合物作为酮转移氢化的催化剂，其中3种显示出最高的活性。在85℃下，在0.5mol％的催化剂负载量和20mol％的t- BuOK下，反应进行得很好，持续了24小时。此外，3还用作催化剂，用于通过醛的转移氢化合成伯醇，以及通过无受体的脱氢缩合反应合成1,2-二取代的苯并咪唑和喹啉。
• A monolith immobilised iridium Cp* catalyst for hydrogen transfer reactions under flow conditions
  作者：Maria Victoria Rojo、Lucie Guetzoyan、Ian. R. Baxendale

  DOI：10.1039/c4ob02376e

  日期：——

  An immobilised iridium hydrogen transfer catalyst has been developed for use in flow based processing by incorporation of a ligand into a porous polymeric monolithic flow reactor.

  一种固定的铱氢转移催化剂已经开发出来，用于流动式加工，通过将配体纳入多孔聚合物单体流动反应器中。