1-苯基-1H-吡唑-4-甲酸 | 1134-50-5

• 物质功能分类: 有机原料 - 羧酸类化合物及衍生物
• 分子结构分类: 有机化合物 - 有机杂环化合物 - 唑类
• 中文名称: 1-苯基-1H-吡唑-4-甲酸
• 中文别名: 1-苯基-1H-吡唑-4-羧酸；1-苯基吡唑-4-甲酸
• 英文名称: 4-carboxy-1-phenylpyrazole
• 英文别名: 1-phenyl-1H-pyrazole-4-carboxylic acid；1-phenylpyrazole-4-carboxylic acid；1-Phenyl-pyrazol-4-carbonsaeure
• CAS: 1134-50-5
• 化学式: C₁₀H₈N₂O₂
• mdl: MFCD00514518
• 分子量: 188.186
• InChiKey: ZROILLPDIUNLSE-UHFFFAOYSA-N

物化性质

• 熔点：
  222-227℃
• 沸点：
  379.6±15.0 °C(Predicted)
• 密度：
  1.28±0.1 g/cm3(Predicted)
• 稳定性/保质期：

  如果按照规格使用和储存，则不会分解，没有已知的危险反应，应避免与氧化物接触。

计算性质

• 辛醇/水分配系数(LogP)：
  1.4
• 重原子数：
  14
• 可旋转键数：
  2
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.0
• 拓扑面积：
  55.1
• 氢给体数：
  1
• 氢受体数：
  3

安全信息

• 危险等级：
  IRRITANT
• 危险品标志：
  Xi
• WGK Germany：
  1
• RTECS号：
  UQ6436000
• 海关编码：
  2933199090
• 危险类别：
  IRRITANT
• 危险性防范说明：
  P261,P305+P351+P338
• 危险性描述：
  H315,H319,H335

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : 1-Phenyl-1H-pyrazole-4-carboxylic acid
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No. : 1134-50-5
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Label elements
The product does not need to be labelled in accordance with EC directives or respective national laws.
Other hazards
Possible sensitizer.

---

SECTION 3: Composition/information on ingredients
Substances
Formula : C10H8N2O2
Molecular Weight : 188,18 g/mol
CAS-No. : 1134-50-5
No components need to be disclosed according to the applicable regulations.

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, nitrogen oxides (NOx)
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Handle and store under inert gas. Heat-, light-, and moisture-sensitive.
Specific end use(s)
A part from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher
level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges.
Use respirators and components tested and approved under appropriate government standards
such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing 222 - 227 °C
point
f) Initial boiling point and no data available
boiling range
g) Flash point no data available
h) Evapouration rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density no data available
n) Water solubility no data available
o) Partition coefficient: n- log Pow: 1,718
octanol/water
p) Auto-ignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

---

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
no data available

---

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
For this product a chemical safety assessment was not carried out

---

SECTION 16: Other information
Further information
Copyright 2013 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

反应信息

• 作为反应物：
  描述：

  1-苯基-1H-吡唑-4-甲酸 在 草酰氯 、 三甲基铝 、 氯化铵 、 N,N-二甲基甲酰胺 作用下， 以 二氯甲烷 、 丙酮 、 甲苯 为溶剂， 反应 11.0h， 生成 5-Methylsulfanyl-4-[4-(1-phenyl-1H-pyrazol-4-yl)-thiazol-2-yl]-thiophene-2-carboxamidine
  参考文献：
  名称：

  A novel series of potent and selective small molecule inhibitors of the complement component C1s

  摘要：

  Activation of the classical pathway of complement has been implicated in disease states such as hereditary angioedema, ischemia-reperfusion injury and acute transplant rejection. The trypsin-like serine protease C1s represents a pivotal upstream point of control in the classical pathway of complement activation and is therefore likely to be a useful target in the therapeutic intervention of these disease states. A series of thiopheneamidine-based inhibitors of C1s has been optimized to give a 70 nM inhibitor that inhibits the classical pathway of complement activation in vitro. (C) 2004 Elsevier Ltd. All rights reserved.

  DOI：

  10.1016/j.bmcl.2004.04.034
• 作为产物：
  描述：

  4-氯甲基-1-苯基-1H-吡唑 在 potassium permanganate 作用下， 生成 1-苯基-1H-吡唑-4-甲酸
  参考文献：
  名称：

  1-苯基吡唑衍生物的制备及性质

  摘要：

  DOI：

  10.1039/jr9540002293

文献信息

• [EN] TRIAZOLOPYRIDINE AND TRIAZOLOPYRIMIDINE INHIBITORS OF MYELOPEROXIDASE<br/>[FR] INHIBITEURS DE MYÉLOPEROXYDASE DE TYPE TRIAZOLOPYRIDINE ET TRIAZOLOPYRIMIDINE
  申请人：BRISTOL MYERS SQUIBB CO

  公开号：WO2016040417A1

  公开（公告）日：2016-03-17

  The present invention provides compounds of Formula (I): wherein A and R1 are each as defined in the specification, and compositions comprising any of such novel compounds. These compounds are myeloperoxidase (MPO) inhibitors and/or eosinophil peroxidase (EPX) inhibitors, which may be used as medicaments.

  本发明提供了式（I）的化合物：其中A和R1如规范中所定义，并包括任何此类新化合物的组合物。这些化合物是髓过氧化物酶（MPO）抑制剂和/或嗜酸性粒细胞过氧化物酶（EPX）抑制剂，可用作药物。
• KDM1A INHIBITORS FOR THE TREATMENT OF DISEASE
  申请人：Imago Biosciences, Inc.

  公开号：US20160237043A1

  公开（公告）日：2016-08-18

  Disclosed herein are new compounds and compositions and their application as pharmaceuticals for the treatment of diseases. Methods of inhibition of KDM1A, methods of increasing gamma globin gene expression, and methods to induce differentiation of cancer cells in a human or animal subject are also provided for the treatment of diseases such as acute myelogenous leukemia.

  本文披露了新化合物和组合物，以及它们作为药物治疗疾病的应用。还提供了抑制KDM1A的方法，增加γ球蛋白基因表达的方法，以及诱导人类或动物主体中癌细胞分化的方法，用于治疗急性髓性白血病等疾病。
• [EN] OXAZOLIDINONE COMPOUNDS AND DERIVATIVES THEREOF<br/>[FR] COMPOSÉS D'OXAZOLIDINONE ET LEURS DÉRIVÉS
  申请人：AMGEN INC

  公开号：WO2013134079A1

  公开（公告）日：2013-09-12

  Compounds of Formula (I) and Formula (II) are useful inhibitors of tankyrase. Compounds of Formula (I) and Formula (II) have the following structure: where the definitions of the variables are provided herein.

  式(I)和式(II)的化合物是坦克酶的有用抑制剂。式(I)和式(II)的化合物具有以下结构：其中变量的定义在此提供。
• [EN] LYSYL OXIDASE-LIKE 2 INHIBITORS AND USES THEREOF<br/>[FR] INHIBITEURS DE LA LYSYL OXYDASE-LIKE 2 ET UTILISATIONS DESDITS INHIBITEURS
  申请人：PHARMAKEA INC

  公开号：WO2017015221A1

  公开（公告）日：2017-01-26

  Described herein are compounds that are LOXL2 inhibitors, methods of making such compounds, pharmaceutical compositions and medicaments comprising such compounds, and methods of using such compounds in the treatment of conditions, diseases, or disorders associated with LOXL2 activity.

  本文描述了一些LOXL2抑制剂化合物，制备这些化合物的方法，包含这些化合物的药物组合物和药物，以及使用这些化合物治疗与LOXL2活性相关的疾病、疾病或疾病的方法。
• Novel 1,3-Disubstituted 8-(1-benzyl-1<i>H</i>-pyrazol-4-yl) Xanthines:  High Affinity and Selective A_2B Adenosine Receptor Antagonists
  作者：Rao V. Kalla、Elfatih Elzein、Thao Perry、Xiaofen Li、Venkata Palle、Vaibhav Varkhedkar、Arthur Gimbel、Tennig Maa、Dewan Zeng、Jeff Zablocki

  DOI：10.1021/jm051268+

  日期：2006.6.1

  analogues, the smaller 1,3-dialkyl groups (methyl and ethyl) increased the A(2B) AdoR binding selectivity of the xanthine derivatives while retaining the affinity. However, the larger 1,3-dialkyl groups (isobutyl and butyl) resulted in a decrease in both A(2B) AdoR affinity and selectivity. This final SAR optimization led to the discovery of 1,3-dimethyl derivative 60, 8-(1-(3-(trifluoromethyl) benzyl)-1H-pyrazol-4-yl)-1

  腺苷已被建议在哮喘患者中诱导支气管高反应性，据信这是A（2B）腺苷受体（AdoR）介导的途径。我们假设选择性的高亲和力A（2B）AdoR拮抗剂可能在哮喘的治疗中提供治疗益处。为了确定一种高亲和力，选择性的A（2B）AdoR拮抗剂，我们合成了8-（C-4-吡唑基）黄嘌呤。化合物22 8-（1H-吡唑-4-基）-1,3-二丙基黄嘌呤是N-1未取代的吡唑衍生物，对A（2B）具有良好的结合亲和力（K（i）= 9 nM） AdoR，但与A（1）AdoR相比只有2倍的选择性。在N-1-吡唑的22位引入苄基导致19，其具有中等选择性。SAR研究的最初重点是制备19的取代苄基衍生物，因为相对于19，相应的苯基，苯乙基和苯丙基衍生物显示出A（2B）AdoR亲和力和选择性降低。苯环上的首选取代如在33和36中分别在19中，C 1包含一个吸电子基团，特别是F或CF（3），在保持对A（2B）AdoR的亲和力的同时