tert-Butyl 3-(Isopropyl)carbazate SAFETY DATA SHEET Section 1. IDENTIFICATION Product name: tert-Butyl 3-(Isopropyl)carbazate 5.3 Section 2. HAZARDS IDENTIFICATION GHS classification PHYSICAL HAZARDS Not classified Not classified HEALTH HAZARDS ENVIRONMENTAL HAZARDS Not classified GHS label elements, including precautionary statements Pictograms or hazard symbols None No signal word Signal word Hazard statements None None Precautionary statements: Section 3. COMPOSITION/INFORMATION ON INGREDIENTS Substance/mixture: Substance Components: tert-Butyl 3-(Isopropyl)carbazate Percent: >98.0%(GC)(T) CAS Number: 16689-35-3 Synonyms: 3-(Isopropyl)carbazic Acid tert-Butyl Ester , 1-tert-Butoxycarbonyl-2- isopropylhydrazine , 1-Boc-2-isopropylhydrazine C8H18N2O2 Chemical Formula: Section 4. FIRST AID MEASURES Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get medical advice/attention if you feel unwell. Skin contact: Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower. If skin irritation or rash occurs: Get medical advice/attention. Eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: Get medical advice/attention. Ingestion: Get medical advice/attention if you feel unwell. Rinse mouth. A rescuer should wear personal protective equipment, such as rubber gloves and air- Protection of first-aiders: tight goggles. Section 5. FIRE-FIGHTING MEASURES Suitable extinguishing Dry chemical, foam, water spray, carbon dioxide. media: Specific hazards arising Take care as it may decompose upon combustion or in high temperatures to from the chemical: generate poisonous fume. tert-Butyl 3-(Isopropyl)carbazate Section 5. FIRE-FIGHTING MEASURES Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing method according to the surrounding situation is used. Uninvolved persons should evacuate to a safe place. In case of fire in the surroundings: Remove movable containers if safe to do so. Special protective When extinguishing fire, be sure to wear personal protective equipment. equipment for firefighters: Section 6. ACCIDENTAL RELEASE MEASURES Use personal protective equipment. Keep people away from and upwind of spill/leak. Personal precautions, protective equipment and Entry to non-involved personnel should be controlled around the leakage area by emergency procedures: roping off, etc. Environmental precautions: Prevent product from entering drains. Methods and materials for Sweep dust to collect it into an airtight container, taking care not to disperse it. containment and cleaning Adhered or collected material should be promptly disposed of, in accordance with up: appropriate laws and regulations. Section 7. HANDLING AND STORAGE Precautions for safe handling Handling is performed in a well ventilated place. Wear suitable protective equipment. Technical measures: Prevent dispersion of dust. Wash hands and face thoroughly after handling. Use a local exhaust if dust or aerosol will be generated. Advice on safe handling: Avoid contact with skin, eyes and clothing. Conditions for safe storage, including any incompatibilities Storage conditions: Keep container tightly closed. Store in a cool and dark place. Store away from incompatible materials such as oxidizing agents. Packaging material: Comply with laws. Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION Install a closed system or local exhaust as possible so that workers should not be Engineering controls: exposed directly. Also install safety shower and eye bath. Personal protective equipment Respiratory protection: Dust respirator. Follow local and national regulations. Hand protection: Protective gloves. Eye protection: Safety glasses. A face-shield, if the situation requires. Skin and body protection: Protective clothing. Protective boots, if the situation requires. Section 9. PHYSICAL AND CHEMICAL PROPERTIES Physical state (20°C): Solid Form: Crystal- Powder Colour: White - Almost white Odour: No data available pH: No data available Melting point/freezing point:54°C 80°C/0.1kPa Boiling point/range: Flash point: No data available Flammability or explosive limits: No data available Lower: Upper: No data available No data available Relative density: Solubility(ies): No data available [Water] [Other solvents] Methanol Soluble: tert-Butyl 3-(Isopropyl)carbazate Section 10. STABILITY AND REACTIVITY Chemical stability: Stable under proper conditions. Possibility of hazardous No special reactivity has been reported. reactions: Incompatible materials: Oxidizing agents Hazardous decomposition Carbon monoxide, Carbon dioxide, Nitrogen oxides (NOx) products: Section 11. TOXICOLOGICAL INFORMATION No data available Acute Toxicity: Skin corrosion/irritation: No data available No data available Serious eye damage/irritation: Germ cell mutagenicity: No data available Carcinogenicity: IARC = No data available NTP = No data available No data available Reproductive toxicity: Section 12. ECOLOGICAL INFORMATION Ecotoxicity: No data available Fish: Crustacea: No data available Algae: No data available Persistence / degradability: No data available Bioaccumulative No data available potential(BCF): Mobility in soil Log Pow: No data available No data available Soil adsorption (Koc): Henry's Law No data available constant(PaM3/mol): Section 13. DISPOSAL CONSIDERATIONS Recycle to process, if possible. Consult your local regional authorities. You may be able to dissolve or mix material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when disposing of the substance. Section 14. TRANSPORT INFORMATION Hazards Class: Does not correspond to the classification standard of the United Nations Not listed UN-No: Section 15. REGULATORY INFORMATION Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002 and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport, loading and unloading were prescribed. tert-Butyl 3-(Isopropyl)carbazate
Synthesis of Highly Substituted 1,2-Diazetidin-3-ones, Small-Ring Scaffolds for Drug Discovery
作者:Marilia S. Santos、Andrew Nortcliffe、William Lewis、Tracey D. Bradshaw、Christopher J. Moody
DOI:10.1002/chem.201801309
日期:2018.6.12
readily accessible, small ring scaffolds that upon functionalization have the potential to produce diverse 3‐dimensional structures for drug discovery. Thus, treatment of diazo hydrazides, obtained from simple hydrazides and malonyl half ester derivatives, followed by diazo transfer, with catalytic amounts of rhodium(II) acetate dimer results in intramolecular carbenoid N−H insertion to give 1,2‐diazetidin‐3‐ones
difficulty in synthesizing such peptide analogues, as illustrated by the synthesis of tripeptide derivatives containing two consecutive aza-amino acids. Herein, we report some general guidelines regarding the activation and the coupling of alkyl-hydrazides either mutually or with a natural amino acid, taking into account their nucleophilicity and the nature of their side chains.
BENZOXEPIN PI3K INHIBITOR COMPOUNDS AND METHODS OF USE
申请人:Blaquiere Nicole
公开号:US20110076291A1
公开(公告)日:2011-03-31
Benzoxepin compounds of Formula I, and including stereoisomers, geometric isomers, tautomers, solvates, metabolites and pharmaceutically acceptable salts thereof, wherein: Z
1
is CR
1
or N; Z
2
is CR
2
or N; Z
3
is CR
3
or N; Z
4
is CR
4
or N; and where (i) X
1
is N and X
2
is S, (ii) X
1
is S and X
2
is N, (iii) X
1
is CR
7
and X
2
is S, (iv) X
1
is S and X
2
is CR
7
; (v) X
1
is NR
8
and X
2
is N, (vi) X
1
is N and X
2
is NR
8
, (vii) X
1
is CR
7
and X
2
is O, (viii) X
1
is O and X
2
is CR
7
, (ix) X
1
is CR
7
and X
2
is C(R
7
)
2
, (x) X
1
is C(R
7
)
2
and X
2
is CR
7
; (xi) X
1
is N and X
2
is O, or (xii) X
1
is O and X
2
is N, are useful for inhibiting lipid kinases including p110 alpha and other isoforms of PI3K, and for treating disorders such as cancer mediated by lipid kinases. Methods of using compounds of Formula I for in vitro, in situ, and in vivo diagnosis, prevention or treatment of such disorders in mammalian cells, or associated pathological conditions, are disclosed.
Formula I中的苯并氧杂环化合物,包括立体异构体、几何异构体、互变异构体、溶剂化合物、代谢物和其药学上可接受的盐,其中:Z1为CR1或N;Z2为CR2或N;Z3为CR3或N;Z4为CR4或N;其中(i)X1为N且X2为S,(ii)X1为S且X2为N,(iii)X1为CR7且X2为S,(iv)X1为S且X2为CR7;(v)X1为NR8且X2为N,(vi)X1为N且X2为NR8,(vii)X1为CR7且X2为O,(viii)X1为O且X2为CR7,(ix)X1为CR7且X2为C(R7)2,(x)X1为C(R7)2且X2为CR7;(xi)X1为N且X2为O,或(xii)X1为O且X2为N,用于抑制脂质激酶,包括p110α和PI3K的其他同工酶,并用于治疗由脂质激酶介导的癌症等疾病。公开了利用Formula I中的化合物在哺乳动物细胞中进行体外、体内和体内诊断、预防或治疗此类疾病或相关病理状况的方法。
Synthesis of Macrocycles Derived from Substituted Triazines
作者:Akop Yepremyan、Arshad Mehmood、Parham Asgari、Benjamin G. Janesko、Eric E. Simanek
DOI:10.1002/cbic.201800475
日期:2019.1.18
Bicycle made from two: Condensation of a small molecule bearing an aldehyde and hydrazine group leads to macrocycles, specifically dimers, in excellent yields. The design rests on a substituted [1,3,5]‐triazine that affords multiple sites for the incorporation of structural diversity.