6-氟烟酸甲酯 | 1427-06-1

• 物质功能分类: 有机原料 - 羧酸类化合物及衍生物 - 羧酸酯及其衍生物
• 分子结构分类: 有机化合物 - 有机杂环化合物 - 吡啶及其衍生物
• 中文名称: 6-氟烟酸甲酯
• 中文别名: 2-氟吡啶-5-甲酸甲酯；6-氟吡啶-3-甲酸甲酯
• 英文名称: methyl 6-fluoronicotinate
• 英文别名: methyl 6-fluoropyridine-3-carboxylate；6-fluoronicotinic acid methyl ester
• CAS: 1427-06-1
• 化学式: C₇H₆FNO₂
• 分子量: 155.129
• InChiKey: HLYBWNNPVXFCPZ-UHFFFAOYSA-N

物化性质

• 熔点：
  48-52 °C
• 沸点：
  210.3±20.0 °C(Predicted)
• 密度：
  1.243±0.06 g/cm3(Predicted)
• 闪点：
  99 °C
• 溶解度：
  溶于甲醇

计算性质

• 辛醇/水分配系数(LogP)：
  1.1
• 重原子数：
  11
• 可旋转键数：
  2
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.14
• 拓扑面积：
  39.2
• 氢给体数：
  0
• 氢受体数：
  4

安全信息

• 危险品标志：
  Xn
• 安全说明：
  S26
• 危险类别码：
  R22
• WGK Germany：
  3
• 海关编码：
  2933399090
• 危险性防范说明：
  P305+P351+P338
• 危险性描述：
  H302,H319
• 储存条件：
  应存放在室温、密封、干燥、避光的环境中。

SDS

---

Section 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product identifiers
Product name : Methyl 6-fluoropyridine-3-carboxylate
CAS-No. : 1427-06-1
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

Section 2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Acute toxicity, Oral (Category 4)
Serious eye damage (Category 1)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Harmful if swallowed. Risk of serious damage to eyes.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word Danger
Hazard statement(s)
H302 Harmful if swallowed.
H318 Causes serious eye damage.
Precautionary statement(s)
P280 Wear protective gloves/ eye protection/ face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazard none
Statements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R22 Harmful if swallowed.
R41 Risk of serious damage to eyes.
S-phrase(s)
S26 In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S45 In case of accident or if you feel unwell, seek medical advice immediately
(show the label where possible).
Other hazards - none

---

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Synonyms : Methyl 6-fluoronicotinate
Formula : C7H6FNO2
Molecular Weight : 155,13 g/mol
Component Concentration
Methyl 6-fluoropyridine-3-carboxylate
CAS-No. 1427-06-1 -

---

Section 4. FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
Cough, Shortness of breath, Headache, Nausea, Vomiting
Indication of any immediate medical attention and special treatment needed
no data available

---

Section 5. FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, nitrogen oxides (NOx), Hydrogen fluoride
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

Section 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

Section 7. HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
protection.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Specific end uses
no data available

---

Section 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering
controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
respirators and components tested and approved under appropriate government standards such
as NIOSH (US) or CEN (EU).

---

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a) Appearance Form: flakes
Colour: beige
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing Melting point/range: 48 - 52 °C
point
f) Initial boiling point and no data available
boiling range
g) Flash point 98,9 °C
h) Evaporation rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density no data available
n) Water solubility no data available
o) Partition coefficient: n- no data available
octanol/water
p) Autoignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

Section 10. STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available

---

Section 11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation May be harmful if inhaled. May cause respiratory tract irritation.
Ingestion Harmful if swallowed.
Skin May be harmful if absorbed through skin. May cause skin irritation.
Eyes Causes eye burns.
Signs and Symptoms of Exposure
Cough, Shortness of breath, Headache, Nausea, Vomiting
Additional Information
RTECS: Not available

---

Section 12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available

---

Section 13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
professional waste disposal service to dispose of this material. Dissolve or mix the material with a
combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

Section 14. TRANSPORT INFORMATION
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
no data available

---

Section 15. REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available

---

Section 16. OTHER INFORMATION
Further information
Copyright 2012 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

反应信息

• 作为反应物：
  描述：

  6-氟烟酸甲酯 在 potassium carbonate 、 sodium hydroxide 作用下， 以 四氢呋喃 、 甲醇 、 水 、 二甲基亚砜 为溶剂， 反应 24.5h， 生成 6-[4-(叔丁氧羰酰)哌嗪-1-YL]烟酸
  参考文献：
  名称：

  Mechanisms of Action of Novel Influenza A/M2 Viroporin Inhibitors Derived from Hexamethylene Amiloride

  摘要：

  对核准抗病毒药物产生耐药性的流感病毒日益增多,这凸显了开发新型抗流感药物的必要性。本文描述了六亚甲基氨氯吡嗪(HMA)衍生物的功能特性,它们能抑制A型流感M2离子通道的野生型和金刚烷胺耐药型。例如, 6-( 唑戊吡嗪-1-吡啦达)-N-甲甲喷达吡嗪-氨酸胺(9)对金刚烷胺敏感的M2离子通道电流的抑制效力比金刚烷胺或HMA高3至6倍(IC50分别为0.2、0.6和1.3μM)。化合物9与金刚烷胺竞争抑制M2, 分子对接模拟显示9结合在金刚烷胺结合位点的重叠处。此外, 二（伞形酮基羰基）-2',3-二硝基-[1,1'-苄基]-4-羧酸替丁酯(27)既对敏感型M2有效, 也对编码丝氨酸31突变为天冬酰胺(S31N)的耐药型M2变种有效, 且效力优于金刚烷胺和HMA(IC50分别为0.6μM和4.4μM)。虽然9抑制了编码野生型M2的流感病毒的体外复制(EC50=2.3μM), 但27和二（伞形酮基羰基）-2',3-二硝基-[1,1'-苄基]-4-羧酸替丁酯(26)更倾向于抑制编码M2(S31N)的病毒(各自的EC50分别为18.0和1.5μM)。这一发现表明,可以设计HMA衍生物来抑制金刚烷胺耐药的病毒。我们的研究强调了HMA衍生物作为耐药性流感M2离子通道抑制剂的潜力。

  DOI：

  10.1124/mol.115.102731
• 作为产物：
  描述：

  烟酸 生成 6-氟烟酸甲酯
  参考文献：
  名称：

  VAN, DER PUY MICHAEL;EIBECK, RICHARD E.

  摘要：

  DOI：
• 作为试剂：
  描述：

  6-氟烟酸 、 三甲基硅烷化重氮甲烷 在 6-氟烟酸甲酯 作用下， 以 甲醇 为溶剂， 反应 0.5h， 生成 6-氟烟酸甲酯
  参考文献：
  名称：

  Modified Malonate Derivatives

  摘要：

  本发明涉及一种新的改性丙二酸酯衍生物类，这些改性丙二酸酯化合物可用于治疗癌症。这些改性丙二酸酯化合物还可以抑制组蛋白去乙酰化酶，并适用于选择性诱导终末分化，阻止肿瘤细胞生长和/或凋亡，从而抑制这些细胞的增殖。因此，本发明的化合物在治疗具有肿瘤细胞增殖特征的患者方面非常有用。本发明的化合物还可以用于预防和治疗TRX介导的疾病，例如自身免疫、过敏和炎症性疾病，并用于预防和/或治疗中枢神经系统（CNS）疾病，例如神经退行性疾病。本发明还提供了包括改性丙二酸酯衍生物的药物组合物和这些药物组合物的安全用药方案，这些方案易于遵循，并在体内产生治疗有效量的改性丙二酸酯衍生物。

  公开号：

  US20100160327A1

文献信息

• [EN] HORMONE RECEPTOR MODULATORS FOR TREATING METABOLIC MUTAGENIC AND FIBROTIC CONDITIONS AND DISORDERS<br/>[FR] MODULATEURS DU RÉCEPTEUR HORMONAL POUR LE TRAITEMENT D'ÉTATS ET DE TROUBLES MÉTABOLIQUES MUTAGÈNES ET FIBROTIQUES
  申请人：ARDELYX INC

  公开号：WO2019055808A1

  公开（公告）日：2019-03-21

  The invention relates to activators of FXR useful in the treatment of autoimmune disorders, liver disease, intestinal disease, kidney disease, cancer, and other diseases in which FXR plays a role, having the Formula (I): wherein L1, A, X1, X2, Y1, Y2, Y3, Y4, R1, R2, and R3 are described herein.

  这项发明涉及FXR的激活剂，可用于治疗自身免疫性疾病、肝病、肠道疾病、肾脏疾病、癌症以及FXR发挥作用的其他疾病，其化学式为（I）：其中L1、A、X1、X2、Y1、Y2、Y3、Y4、R1、R2和R3如本文所述。
• [EN] MODULATORS OF THE INTEGRATED STRESS PATHWAY<br/>[FR] MODULATEURS DE LA VOIE DE RÉPONSE INTÉGRÉE AU STRESS
  申请人：CALICO LIFE SCIENCES

  公开号：WO2017193063A1

  公开（公告）日：2017-11-09

  Provided herein are compounds, compositions, and methods useful for modulating the integrated stress response (ISR) and for treating related diseases; disorders and conditions.

  本文提供了用于调节综合应激反应（ISR）并治疗相关疾病、疾患和症状的化合物、组合物和方法。
• FLAP MODULATORS
  申请人：JANSSEN PHARMACEUTICA NV

  公开号：US20140221310A1

  公开（公告）日：2014-08-07

  The present invention relates to compounds of Formula (I), or a form thereof, wherein ring A, R 1 , L and R 2 are as defined herein, useful as FLAP modulators. The invention also relates to pharmaceutical compositions comprising compounds of Formula (I). Methods of making and using the compounds of Formula (I) are also within the scope of the invention.

  本发明涉及式（I）化合物，或其形式，其中环A，R1，L和R2如本文所定义，作为FLAP调节剂有用。该发明还涉及包含式（I）化合物的药物组合物。制备和使用式（I）化合物的方法也属于本发明的范围。
• 縮合二環式ヘテロ環誘導体
  申请人：第一三共株式会社

  公开号：JP2016141632A

  公开（公告）日：2016-08-08

  【課題】優れたレチノイン酸受容体関連オーファン受容体γｔ阻害作用を有し、乾癬等の治療薬として有用な化合物の提供。【解決手段】一般式（Ｉ）で表される化合物又はその薬理上許容される塩。［環Ａはピロール環、イミダゾール環又はピラゾール環；環Ｂは置換／非置換のベンゼン環、シクロヘキサジエン環、シクロペンテン環、シクロヘキセン環等；Ｒ１はＨ、ハロゲン原子等；Ｒ２はＨ、ハロゲン原子、Ｃ１−Ｃ６アルキル基等；式＝Ｑ−Ｔ−で表される基は式＝ＣＨ−ＣＨ＝ＣＨ−で表される基等；Ｚは式＝ＣＨ−で表される基等；式−Ｕ−Ｖ（ＣＯ２Ｈ）−Ｗ−で表される基は、式−ＣＨ＝ＣＨ−Ｃ（ＣＯ２Ｈ）＝ＣＨ−で表される基等］【選択図】なし

  提供具有优良的视黄醇酸受体相关孤儿受体γt抑制作用，并且作为银屑病等治疗药物有用的化合物。通式（Ｉ）表示的化合物或其药理上可接受的盐。【环Ａ为吡咯环、咪唑环或吡唑环；环Ｂ为取代/非取代的苯环、环己二烯环、环戊二烯环、环己烯环等；Ｒ₁为Ｈ、卤原子等；Ｒ₂为Ｈ、卤原子、Ｃ₁−Ｃ₆烷基等；基＝Ｑ−Ｔ−表示的基为基＝ＣＨ−ＣＨ＝ＣＨ−等；Ｚ为基＝ＣＨ−等；基表示为式−Ｕ−Ｖ（ＣＯ₂Ｈ）−Ｗ−的基为，基表示为式−ＣＨ＝ＣＨ−Ｃ（ＣＯ₂Ｈ）＝ＣＨ−等】【选择图】无
• [EN] COMPOSITIONS AND METHODS FOR IMMUNE MODULATION AND TREATMENT OF CANCER<br/>[FR] COMPOSITIONS ET MÉTHODES DE MODULATION IMMUNITAIRE ET DE TRAITEMENT DU CANCER
  申请人：UNIV MICHIGAN STATE

  公开号：WO2020150668A1

  公开（公告）日：2020-07-23

  The disclosure relates to rexinoids, including compounds of the Formula (I) and (II) or a pharmaceutically acceptable salt, polymorph, prodrug, solvate or clathrate thereof. These rexinoids are useful for increasing PD-L1 in vivo, for treatment of cancer, and for inhibiting the onset of cancer.

  该披露涉及雷克西酮，包括式(I)和(II)的化合物或其药用可接受的盐、多型体、前药、溶剂合物或包合物。这些雷克西酮对于体内增加PD-L1，在癌症治疗中以及抑制癌症发生方面是有用的。