4-(4-溴苯氧基)苯酚 | 13320-48-4

• 物质功能分类: 有机原料 - 醇、酚、酚醇类化合物及衍生物 - 酚及其卤化、磺化、硝化或亚硝化衍生物
• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 中文名称: 4-(4-溴苯氧基)苯酚
• 英文名称: 4-(4-bromophenoxy)phenol
• CAS: 13320-48-4
• 化学式: C₁₂H₉BrO₂
• 分子量: 265.106
• InChiKey: HMBBTPMHPQGJMR-UHFFFAOYSA-N

物化性质

• 熔点：
  73-78 °C
• 沸点：
  359.5±22.0 °C(Predicted)
• 密度：
  1.518±0.06 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  4
• 重原子数：
  15
• 可旋转键数：
  2
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.0
• 拓扑面积：
  29.5
• 氢给体数：
  1
• 氢受体数：
  2

安全信息

• 危险品标志：
  Xi,N
• 安全说明：
  S26
• 危险类别码：
  R36
• 海关编码：
  2909500000
• WGK Germany：
  3
• 危险品运输编号：
  UN 3077 9/PG 3
• 包装等级：
  III
• 危险类别：
  9
• 危险性防范说明：
  P261,P273,P305+P351+P338,P342+P311
• 危险性描述：
  H319,H334,H411
• 储存条件：
  存储条件：2-8°C，需密封并置于干燥处。

SDS

---

Section 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product identifiers
Product name : 4-(4-Bromophenoxy)phenol
CAS-No. : 13320-48-4
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

Section 2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Eye irritation (Category 2)
Respiratory sensitization (Category 1)
Chronic aquatic toxicity (Category 2)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Irritating to eyes. May cause sensitization by skin contact. Toxic to aquatic organisms, may cause long-
term adverse effects in the aquatic environment.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word Danger
Hazard statement(s)
H319 Causes serious eye irritation.
H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.
H411 Toxic to aquatic life with long lasting effects.
Precautionary statement(s)
P261 Avoid breathing dust.
P273 Avoid release to the environment.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P342 + P311 If experiencing respiratory symptoms: Call a POISON CENTER or doctor/
physician.
Supplemental Hazard none
Statements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R36 Irritating to eyes.
R43 May cause sensitization by skin contact.
R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the
aquatic environment.
S-phrase(s)
S26 In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
S36/37 Wear suitable protective clothing and gloves.
S61 Avoid release to the environment. Refer to special instructions/ Safety
data sheets.
Other hazards - none

---

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Formula : C12H9BrO2
Molecular Weight : 265,1 g/mol
Component Concentration
4-(4-Bromophenoxy)phenol
CAS-No. 13320-48-4 -

---

Section 4. FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Indication of any immediate medical attention and special treatment needed
no data available

---

Section 5. FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, Hydrogen bromide gas
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

Section 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the
environment must be avoided.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

Section 7. HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
protection.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Recommended storage temperature: 2 - 8 °C
Heat-, light-, and moisture-sensitive. Handle and store under inert gas.
Specific end uses
no data available

---

Section 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher
level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges.
Use respirators and components tested and approved under appropriate government standards
such as NIOSH (US) or CEN (EU).

---

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing Melting point/range: 73 - 78 °C
point
f) Initial boiling point and no data available
boiling range
g) Flash point no data available
h) Evaporation rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density no data available
n) Water solubility no data available
o) Partition coefficient: n- log Pow: 4,152
octanol/water
p) Autoignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

Section 10. STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available

---

Section 11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
Serious eye damage/eye irritation
Eyes - rabbit - Moderate eye irritation
Respiratory or skin sensitization
May cause allergic respiratory reaction.
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation May be harmful if inhaled. May cause respiratory tract irritation.
Ingestion
May be harmful if swallowed.
Skin May be harmful if absorbed through skin. May cause skin irritation.
Eyes Causes serious eye irritation.
Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Additional Information
RTECS: Not available

---

Section 12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
Toxic to aquatic life.

---

Section 13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
professional waste disposal service to dispose of this material. Dissolve or mix the material with a
combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

Section 14. TRANSPORT INFORMATION
UN number
ADR/RID: 3077 IMDG: 3077 IATA: 3077
UN proper shipping name
ADR/RID: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (4-(4-
Bromophenoxy)phenol)
IMDG: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (4-(4-
Bromophenoxy)phenol)
IATA: Environmentally hazardous substance, solid, n.o.s. (4-(4-Bromophenoxy)phenol)
Transport hazard class(es)
ADR/RID: 9 IMDG: 9 IATA: 9
Packaging group
ADR/RID: III IMDG: III IATA: III
Environmental hazards
ADR/RID: yes IMDG Marine pollutant: yes IATA: yes
Special precautions for user
Further information
EHS-Mark required (ADR 2.2.9.1.10, IMDG code 2.10.3) for single packagings and combination
packagings containing inner packagings with Dangerous Goods > 5L for liquids or > 5kg for solids.

---

---

SECTION 15 - REGULATORY INFORMATION
N/A

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  4-(4-溴苯氧基)苯酚 在 偶氮二甲酸二叔丁酯 、 sodium carbonate 作用下， 以 四氢呋喃 、 乙二醇二甲醚 为溶剂， 反应 64.5h， 生成 3-{4-[4-(1H-pyrazol-3-yl)phenoxy]phenoxymethyl}pyridine
  参考文献：
  名称：

  [EN] ARYLPYRAZOLE ETHERS AS INHIBITORS OF LEUKOTRIENE A4 HYDROLASE
  [FR] ÉTHERS D'ARYLPYRAZOLE EN TANT QU'INHIBITEURS DE LEUCOTRIÈNE A4 HYDROLASE

  摘要：

  本发明涉及公式I的化合物或其药用可接受的盐，其中A1、A2、A3、L1、L2和D如本文所定义。公式（I）的化合物可用作白三烯A4水解酶（LTA4H）的抑制剂，并用于治疗与LTA4H相关的疾病。本发明还涉及包含公式（I）化合物的药物组合物，使用这些化合物治疗各种疾病和疾病的方法，以及制备这些化合物的方法。

  公开号：

  WO2013012844A1
• 作为产物：
  描述：

  1-溴-4-(4-硝基苯氧基)苯 在 盐酸 、 乙酸酐 、 铁粉 、 溶剂黄146 、 sodium nitrite 作用下， 以 乙醇 、 水 为溶剂， 反应 38.0h， 生成 4-(4-溴苯氧基)苯酚
  参考文献：
  名称：

  喹啉类衍生物及其制备方法和用途

  摘要：

  本发明提供一种喹啉类衍生物，以及包含该类衍生物的组合物。本发明还提供制备该类衍生物的方法和该类衍生物及组合物杀灭害虫的用途。

  公开号：

  CN110452167B

文献信息

• [EN] HETEROARYL COMPOUNDS AND THEIR USE AS MER INHIBITORS<br/>[FR] COMPOSÉS HÉTÉROARYLE ET LEUR UTILISATION EN TANT QU'INHIBITEURS DE MER
  申请人：DONG A SOCIO HOLDINGS CO LTD

  公开号：WO2018071343A1

  公开（公告）日：2018-04-19

  Compounds of formula (I) [Formula should be inserted here] and a pharmaceutically acceptable salt thereof, wherein A, R1, R2, R3, R4, R5, R6, R7, R24, X, L, n and p are as defined in the specification, are useful for treating or preventing Mer tyrosine kinase receptor modulated disease or conditions. Also described are pharmaceutical compositions of compounds of formula (I), and methods for using such compounds and compositions.

  式(I)的化合物及其药学上可接受的盐，其中A、R1、R2、R3、R4、R5、R6、R7、R24、X、L、n和p如规范中定义的那样，可用于治疗或预防Mer酪氨酸激酶受体调节的疾病或症状。还描述了式(I)的化合物的药物组合物，以及使用这些化合物和组合物的方法。
• 二氢嘧啶类化合物及其在药物中的应用
  申请人：广东东阳光药业有限公司

  公开号：CN109111451B

  公开（公告）日：2020-08-11

  本发明涉及一种二氢嘧啶类化合物及其作为药物的用途，尤其是作为治疗和预防乙型肝炎的药物的用途。具体地说，本发明涉及通式(I)或(Ia)所示的化合物或其对映异构体、非对映异构体、互变异构体、水合物、溶剂化物或药学上可接受的盐，其中各变量如说明书所定义。本发明还涉及通式(I)或(Ia)所示的化合物或其对映异构体、非对映异构体、互变异构体、水合物、溶剂化物或药学上可接受的盐作为药物的用途，尤其是作为治疗和预防乙型肝炎的药物的用途。
• Organocatalytic Synthesis of α-Triphenylmethylamines from Diarylketimines and Phenols
  作者：Danijel Glavač、Nikola Topolovčan、Matija Gredičak

  DOI：10.1021/acs.joc.0c02225

  日期：2020.11.6

  formal Betti reaction between variously substituted phenols and benzophenone-derived imines to afford α-triphenylmethylamines is reported. The key to the success of this transformation is the in situ generation of the reactive benzophenone iminium species under organocatalytic conditions. Different phenols reacted smoothly, enabling the synthesis of an array of α-triphenylmethylamines, which are highly

  据报道，在各种取代的苯酚和二苯甲酮衍生的亚胺之间进行正式的Betti反应，得到α-三苯甲胺。该转化成功的关键是在有机催化条件下原位生成反应性二苯甲酮亚胺。不同的苯酚反应平稳，可以合成一系列α-三苯甲胺，这是生物活性分子和化学传感器中极有价值的结构图案。
• Potent pyrimidinetrione-based inhibitors of MMP-13 with enhanced selectivity over MMP-14
  作者：Julian A. Blagg、Mark C. Noe、Lilli A. Wolf-Gouveia、Lawrence A. Reiter、Ellen R. Laird、Shang-Poa P. Chang、Dennis E. Danley、James T. Downs、Nancy C. Elliott、James D. Eskra、Richard J. Griffiths、Joel R. Hardink、Amber I. Haugeto、Christopher S. Jones、Jennifer L. Liras、Lori L. Lopresti-Morrow、Peter G. Mitchell、Jayvardhan Pandit、Ralph P. Robinson、Chakrapani Subramanyam、Marcie L. Vaughn-Bowser、Sue A. Yocum

  DOI：10.1016/j.bmcl.2005.02.038

  日期：2005.4

  Through the use of computational modeling, a series of pyrimidinetrione-based inhibitors of MMP-13 was designed based on a lead inhibitor identified through file screening. Incorporation of a biaryl ether moiety at the C-5 position of the pyrimidinetrione ring resulted in a dramatic enhancement of MMP-13 potency. Protein crystallography revealed that this moiety binds in the S(1)(') pocket of the enzyme

  通过使用计算模型，基于通过文件筛选确定的先导抑制剂，设计了一系列基于嘧啶三酮的MMP-13抑制剂。在嘧啶三酮环的C-5位置掺入联芳基醚部分导致MMP-13效力显着提高。蛋白质晶体学揭示该部分结合在酶的S（1）（'）口袋中。末端芳族环的C-4取代基的优化导致相对于MMP-14（MT-1 MMP）的选择性的结合。满足我们体外效价和选择性目标的化合物的药代动力学数据显示了联芳醚取代基的结构活性关系。
• [EN] DIHYDROPYRIMIDINE COMPOUNDS AND USES THEREOF IN MEDICINE<br/>[FR] COMPOSÉS DIHYDROPYRIMIDINE ET UTILISATIONS DE CEUX-CI EN MÉDECINE
  申请人：SUNSHINE LAKE PHARMA CO LTD

  公开号：WO2019001396A1

  公开（公告）日：2019-01-03

  Provided herein are a dihydropyrimidine compound and a pharmaceutical application thereof, especially the application used for treating and preventing HBV diseases. Specifically, provided herein is a compound having Formula (I) or (Ia), or an enantiomer, a diastereoisomer, a tautomer, a hydrate, a solvate, or a pharmaceutically acceptable salt thereof, wherein the variables of the formulas are as defined in the specification. Also provided herein is use of the compound having Formula (I) or (Ia), or an enantiomer, a diastereoisomer, a tautomer, a hydrate, a solvate, or a pharmaceutically acceptable salt thereof as a medicine, especially for treating and preventing HBV diseases.

  本文提供了一种二氢嘧啶化合物及其药物应用，特别是用于治疗和预防HBV疾病的应用。具体来说，本文提供了具有化学式（I）或（Ia）的化合物，或其对映体、异构体、互变异构体、水合物、溶剂合物或其药用可接受的盐，其中化学式的变量如规范中定义。本文还提供了将具有化学式（I）或（Ia）的化合物，或其对映体、异构体、互变异构体、水合物、溶剂合物或其药用可接受的盐用作药物的用途，特别是用于治疗和预防HBV疾病。

表征谱图