(1S,2S,3S,5R)-(+)-异松莰烯胺 | 13293-47-5

• 分子结构分类: 有机化合物 - 脂质和类脂质分子 - 异戊烯醇脂质
• 中文名称: (1S,2S,3S,5R)-(+)-异松莰烯胺
• 中文别名: (+)-异松莰烯胺；(1S,2S,3S,5R)-3-蒎烷胺；(1S,2S,3S,5R)-(+)-异松蒎基胺
• 英文名称: (1S,2S,3S,5R)-(+)-isopinocampheylamine
• 英文别名: (+)-isopinocampheylamine；(1S,2S,3S,5R)-2,6,6-trimethylnorpinan-3-amine；(1S,2S,3S,5R)-2,6,6-trimethylbicyclo[3.1.1]heptan-3-amine
• CAS: 13293-47-5
• 化学式: C₁₀H₁₉N
• 分子量: 153.268
• InChiKey: VPTSZLVPZCTAHZ-KZVJFYERSA-N

物化性质

• 沸点：
  90 °C/18 mmHg (lit.)
• 密度：
  0.909 g/mL at 25 °C (lit.)
• 闪点：
  160 °F

计算性质

• 辛醇/水分配系数(LogP)：
  2.3
• 重原子数：
  11
• 可旋转键数：
  0
• 环数：
  3.0
• sp3杂化的碳原子比例：
  1.0
• 拓扑面积：
  26
• 氢给体数：
  1
• 氢受体数：
  1

安全信息

• 危险品标志：
  Xi
• 安全说明：
  S26
• 危险类别码：
  R36/37/38
• 海关编码：
  2921300090
• WGK Germany：
  3
• 储存条件：
  室温

SDS

---

Section 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product identifiers
Product name : (1S,2S,3S,5R)-(+)-Isopinocampheylamine
CAS-No. : 13293-47-5
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

Section 2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Skin irritation (Category 2)
Eye irritation (Category 2)
Specific target organ toxicity - single exposure (Category 3)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Irritating to eyes, respiratory system and skin.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word Warning
Hazard statement(s)
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Precautionary statement(s)
P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazard none
Statements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R36/37/38 Irritating to eyes, respiratory system and skin.
S-phrase(s)
S26 In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
Other hazards - none

---

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Synonyms : (+)-Isopinocampheylamine
(1S,2S,3S,5R)-3-Pinanamine
Formula : C10H19N
Molecular Weight : 153,26 g/mol
Component Concentration
(+)-Isopinocampheylamine
CAS-No. 13293-47-5 -

---

Section 4. FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with
water. Consult a physician.
Most important symptoms and effects, both acute and delayed
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Indication of any immediate medical attention and special treatment needed
no data available

---

Section 5. FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
For small (incipient) fires, use media such as "alcohol" foam, dry chemical, or carbon dioxide. For large
fires, apply water from as far as possible. Use very large quantities (flooding) of water applied as a mist or
spray; solid streams of water may be ineffective. Cool all affected containers with flooding quantities of
water.
Special hazards arising from the substance or mixture
Carbon oxides, nitrogen oxides (NOx)
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
Use water spray to cool unopened containers.

---

Section 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation.
Remove all sources of ignition. Evacuate personnel to safe areas. Beware of vapours accumulating to
form explosive concentrations. Vapours can accumulate in low areas.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Contain spillage, and then collect with an electrically protected vacuum cleaner or by wet-brushing and
place in container for disposal according to local regulations (see section 13). Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

Section 7. HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Keep away from sources of ignition - No smoking.Take measures to prevent the build up of electrostatic
charge.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Specific end use(s)
no data available

---

Section 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Impervious clothing., The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup
to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).

---

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a) Appearance Form: clear, liquid
Colour: colourless
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing no data available
point
f) Initial boiling point and 90 °C at 24 hPa - lit.
boiling range
g) Flash point 72 °C - closed cup
h) Evaporation rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density 0,909 g/cm3 at 25 °C
n) Water solubility no data available
o) Partition coefficient: n- no data available
octanol/water
p) Auto-ignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

Section 10. STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
Heat, flames and sparks.
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available

---

Section 11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Inhalation: no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
Inhalation - May cause respiratory irritation.
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation May be harmful if inhaled. Causes respiratory tract irritation.
Ingestion May be harmful if swallowed.
Skin May be harmful if absorbed through skin. Causes skin irritation.
Eyes Causes serious eye irritation.
Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Additional Information
RTECS: Not available

---

Section 12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available

---

Section 13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
This combustible material may be burned in a chemical incinerator equipped with an afterburner and
scrubber. Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
professional waste disposal service to dispose of this material.
Contaminated packaging
Dispose of as unused product.

---

Section 14. TRANSPORT INFORMATION
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine Pollutant: no IATA: no
Special precautions for user
no data available

---

Section 15. REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available

---

Section 16. OTHER INFORMATION
Further information
Copyright 2012 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

反应信息

• 作为反应物：
  描述：

  (1S,2S,3S,5R)-(+)-异松莰烯胺 在 乙二醇二甲醚溴化镍 、 4,4'-二甲氧基-2,2'-联吡啶 、 二氢吡啶 、 [Ir(dF(CF₃)ppy)₂(dtbbpy)](PF₆) 、 caesium carbonate 、 溶剂黄146 作用下， 以 N-甲基吡咯烷酮 、 二氯甲烷 为溶剂， 反应 51.0h， 生成 1-(4-((1S,2S,5R)-2,6,6-trimethylbicyclo[3.1.1]heptan-3-yl)phenyl)ethan-1-one
  参考文献：
  名称：

  Ni-catalyzed Reductive Deaminative Arylation at sp³ Carbon Centers

  摘要：

  A Ni-catalyzed reductive deaminative arylation at unactivated sp(3) carbon centers is described. This operationally simple and user-friendly protocol exhibits excellent chemoselectivity profile and broad substrate scope, thus complementing existing metal-catalyzed cross-coupling reactions to forge sp(3) C-C linkages. These virtues have been assessed in the context of late-stage functionalization, hence providing a strategic advantage to reliably generate structure diversity with amine-containing drugs.

  DOI：

  10.1021/acs.orglett.9b01016
• 作为产物：
  描述：

  (+)-二异松蒎基氯硼烷 在 盐酸 、 甲醇 、 sodium hydroxide 、 三甲基铝 、 hydroxylamine-O-sulfonic acid 作用下， 生成 (1S,2S,3S,5R)-(+)-异松莰烯胺
  参考文献：
  名称：

  Organoboranes for Synthesis. 16. A Convenient Synthesis of Enantiomerically Pure Isopinocampheylamine, a Chiral Derivatizing Agent for Gas Chromatographic Analysis of Optically Active Carboxylic Acids

  摘要：

  Both isomers of enantiomerically pure isopinocampheylamine (1) have been synthesized from the corresponding B-chlorodiisopinocampheylborane by treatment with either methylmagnesium bromide or trimethylaluminum to form B-methyldiisopinocampheylborane, followed by treatment of the intermediate with hydroxylamine-O-sulfonic acid. Application of 1 as a derivatizing agent for the gas chromatographic analysis of optically active carboxylic acids has been demonstrated.

  DOI：

  10.1021/jo9512158

文献信息

• Enantioselective Decarboxylative Alkylation Reactions: Catalyst Development, Substrate Scope, and Mechanistic Studies
  作者：Douglas C. Behenna、Justin T. Mohr、Nathaniel H. Sherden、Smaranda C. Marinescu、Andrew M. Harned、Kousuke Tani、Masaki Seto、Sandy Ma、Zoltán Novák、Michael R. Krout、Ryan M. McFadden、Jennifer L. Roizen、John A. Enquist、David E. White、Samantha R. Levine、Krastina V. Petrova、Akihiko Iwashita、Scott C. Virgil、Brian M. Stoltz

  DOI：10.1002/chem.201003383

  日期：2011.12.9

  functions with nearly identical efficiency in terms of yield and enantioselectivity. Catalyst discovery and development, the optimization of reaction conditions, the exploration of reaction scope, and applications in target‐directed synthesis are reported. Experimental observations suggest that these alkylation reactions occur through an unusual inner‐sphere mechanism involving binding of the prochiral

  在钯配合物与各种膦恶唑啉 (PHOX) 配体的存在下，通过不稳定的前手性烯醇化亲核试剂对烯丙基和炔丙基亲电子试剂进行新颖的对映选择性烷基化来获得 α-季酮。三类烯醇化物前体获得了优异的产率和高对映体过量：烯醇碳酸酯、烯醇硅烷和外消旋 β-酮酯。这些底物类别中的每一种在产率和对映选择性方面都具有几乎相同的效率。报道了催化剂的发现和开发、反应条件的优化、反应范围的探索以及在靶向合成中的应用。实验观察表明，这些烷基化反应通过一种不寻常的内球机制发生，涉及前手性烯醇化亲核试剂直接与钯中心结合。
• SULTAM DERIVATIVES
  申请人：Anderson Kevin W.

  公开号：US20110124686A1

  公开（公告）日：2011-05-26

  The present invention relates to compounds according to formula 1, which exhibit cytotoxic activity. The compounds may be used in the treatment of cancer.

  本发明涉及符合式1的化合物，具有细胞毒活性。这些化合物可用于治疗癌症。
• Compounds and methods for inhibiting the interaction of BCL proteins with binding partners
  申请人：Castro C. Alfredo

  公开号：US20060025460A1

  公开（公告）日：2006-02-02

  One aspect of the present invention relates to heterocyclic compounds that bind to bcl proteins and inhibit Bcl function. Another aspect of the present invention relates to compositions comprising a heterocyclic compound of the invention. The present invention provides methods for treating and modulating disorders associated with hyperproliferation, such as cancer.

  本发明的一个方面涉及结合到bcl蛋白并抑制Bcl功能的杂环化合物。本发明的另一个方面涉及包含本发明的杂环化合物的组合物。本发明提供了用于治疗和调节与过度增殖相关的疾病，如癌症的方法。
• Scavenger assisted combinatorial process for preparing libraries of amides, carbamates and sulfonamides
  申请人：ELI LILLY AND COMPANY

  公开号：EP0825164A2

  公开（公告）日：1998-02-25

  This invention relates to a novel solution phase process for the preparation of amide, carbamate, and sulfonamide combinatorial libraries. These libraries have utility for drug discovery and are used to form wellplate components of novel assay kits.

  这项发明涉及一种用于制备酰胺、碳酸酯和磺酰胺组合库的新型溶液相过程。这些库在药物发现中具有实用价值，并用于形成新型检测套件的微孔板组件。
• [EN] GUANIDINO-SUBSTITUTED QUINAZOLINONE COMPOUNDS AS MC4-R AGONISTS<br/>[FR] COMPOSES DE QUINAZOLINE SUBSTITUES PAR GUANIDINO CONSTITUANT DES AGONISTES DE MC4-R
  申请人：CHIRON CORP

  公开号：WO2004112793A1

  公开（公告）日：2004-12-29

  A variety of small molecule, guanidine-containing molecules capable of acting as MC4-R agonists are provided. The compounds are useful in treating MC4-R mediated diseases when administered to subjects. The compounds have the structure IA, IB, and IC where the values of the variables are defined herein.

  提供了一系列含有胍基的小分子化合物，能够作为MC4-R激动剂。当这些化合物被给予受试者时，它们对治疗MC4-R介导的疾病是有用的。这些化合物具有结构IA、IB和IC，其中变量的值在此定义。