2-己基磺酰氯 | 14532-24-2

• 物质功能分类: 有机原料 - 羧酸类化合物及衍生物 - 羧酸酰卤化物
• 分子结构分类: 有机化合物 - 有机卤素化合物 - 磺酰卤
• 中文名称: 2-己基磺酰氯
• 中文别名: 己烷磺酰氯；1-己烷磺酰氯；己基磺酰氯
• 英文名称: 1-hexanesulfonyl chloride
• 英文别名: hexane-1-sulfonyl chloride；hexanesulfonyl chloride
• CAS: 14532-24-2
• 化学式: C₆H₁₃ClO₂S
• 分子量: 184.687
• InChiKey: AEHJDQSLTMFLQO-UHFFFAOYSA-N

物化性质

• 熔点：
  -9℃
• 沸点：
  106.5-107℃ (9 Torr)
• 密度：
  1.1283 g/cm3

计算性质

• 辛醇/水分配系数(LogP)：
  2.7
• 重原子数：
  10
• 可旋转键数：
  5
• 环数：
  0.0
• sp3杂化的碳原子比例：
  1.0
• 拓扑面积：
  42.5
• 氢给体数：
  0
• 氢受体数：
  2

安全信息

• 危险品标志：
  C
• 安全说明：
  S26,S36/37/39,S45
• 危险类别码：
  R34
• WGK Germany：
  3
• 危险品运输编号：
  UN 3265 8
• 海关编码：
  2904909090

SDS

---

Section 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product identifiers
Product name : 1-Hexanesulfonyl chloride
CAS-No. : 14532-24-2
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

Section 2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Skin corrosion (Category 1B)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Causes burns.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word Danger
Hazard statement(s)
H314 Causes severe skin burns and eye damage.
Precautionary statement(s)
P280 Wear protective gloves/ protective clothing/ eye protection/ face
protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor/ physician.
Supplemental Hazard none
Statements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R34 Causes burns.
S-phrase(s)
S26 In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
S36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
S45 In case of accident or if you feel unwell, seek medical advice immediately
(show the label where possible).
Other hazards - none

---

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Formula : C6H13ClO2S
Molecular Weight : 184,68 g/mol
Component Concentration
Hexane-1-sulphonyl chloride
CAS-No. 14532-24-2 -
EC-No. 238-558-4

---

Section 4. FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a
physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with
water. Consult a physician.
Most important symptoms and effects, both acute and delayed
Indication of any immediate medical attention and special treatment needed
no data available

---

Section 5. FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, Sulphur oxides, Hydrogen chloride gas
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

Section 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapors, mist or gas. Ensure adequate ventilation.
Evacuate personnel to safe areas.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

Section 7. HANDLING AND STORAGE
Precautions for safe handling
Avoid inhalation of vapour or mist.
Normal measures for preventive fire protection.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Store under inert gas. Moisture sensitive.
Specific end uses
no data available

---

Section 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protection
tested and approved under appropriate government standards such as NIOSH (US) or EN
166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup
to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).

---

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a) Appearance Form: liquid
Colour: light yellow
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing no data available
point
f) Initial boiling point and 70 - 74 °C at 0,33 hPa
boiling range
g) Flash point no data available
h) Evaporation rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density 1,138 g/cm3
n) Water solubility no data available
o) Partition coefficient: n- no data available
octanol/water
p) Autoignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

Section 10. STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available

---

Section 11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation May be harmful if inhaled. Material is extremely destructive to the tissue of
the mucous membranes and upper respiratory tract.
Ingestion May be harmful if swallowed. Causes burns.
Skin May be harmful if absorbed through skin. Causes skin burns.
Eyes Causes eye burns.
Additional Information
RTECS: Not available

---

Section 12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available

---

Section 13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
professional waste disposal service to dispose of this material.
Contaminated packaging
Dispose of as unused product.

---

Section 14. TRANSPORT INFORMATION
UN number
ADR/RID: 3265 IMDG: 3265 IATA: 3265
UN proper shipping name
ADR/RID: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (Hexane-1-sulphonyl chloride)
IMDG: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (Hexane-1-sulphonyl chloride)
IATA: Corrosive liquid, acidic, organic, n.o.s. (Hexane-1-sulphonyl chloride)
Transport hazard class(es)
ADR/RID: 8 IMDG: 8 IATA: 8
Packaging group
ADR/RID: II IMDG: II IATA: II
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
no data available

---

Section 15. REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available

---

Section 16. OTHER INFORMATION
Further information
Copyright 2012 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

反应信息

• 作为反应物：
  描述：

  2-己基磺酰氯 在 氢氟酸 作用下， 生成 全氟己基磺酰氟
  参考文献：
  名称：

  512. Perfluoroalkyl derivatives of sulphur. Part VI. Perfluoroalkanesulphonic acids CF₃·[CF₂]_n·SO₃H (n= 1—7)

  摘要：

  DOI：

  10.1039/jr9570002640
• 作为产物：
  描述：

  磺酸己烷 在 磺酰氯 作用下， 以 N,N-二甲基甲酰胺 为溶剂， 反应 3.0h， 生成 2-己基磺酰氯
  参考文献：
  名称：

  Rearrangement of sulfonamidyl radicals with hydrogen migration

  摘要：

  DOI：

  10.1007/bf00954818

文献信息

• Clean and Economic Synthesis of Alkanesulfonyl Chlorides from S-Alkyl Isothiourea Salts via Bleach Oxidative Chlorosulfonation
  作者：Jiaxi Xu、Zhanhui Yang、Bingnan Zhou

  DOI：10.1055/s-0033-1338567

  日期：——

  Abstract A simple procedure for clean and economic synthesis of alkanesulfonyl chlorides via bleach-mediated oxidative chlorosulfonation of S-alkyl isothiourea salts is disclosed. This procedure is environment- and worker-friendly with the advantages of readily accessible materials and reagents, simple and safe operations, easy purification without chromatography, and affords high yields of up to 99%

  摘要 公开了通过漂白介导的S-烷基异硫脲盐的氧化氯磺化来清洁和经济地合成烷烃磺酰氯的简单方法。该方法对环境和工人均有利，具有易于获得的材料和试剂，简单安全的操作，无需色谱法即可轻松纯化的优点，并提供高达99％的高收率。 公开了通过漂白介导的S-烷基异硫脲盐的氧化氯磺化来清洁和经济地合成烷烃磺酰氯的简单方法。该方法对环境和工人均有利，具有易于获得的材料和试剂，简单安全的操作，无需色谱法即可轻松纯化的优点，并提供高达99％的高收率。
• Potential antitumor agents. 36. Quantitative relationships between experimental antitumor activity, toxicity, and structure for the general class of 9-anilinoacridine antitumor agents
  作者：William A. Denny、Bruce F. Cain、Graham J. Atwell、Corwin Hansch、Augustine Panthananickal、A. Leo

  DOI：10.1021/jm00345a015

  日期：1982.3

  relationships (QSAR) have been derived between antileukemic (L1210) activity and agent physicochemical properties for 509 tumor-active members of the general class of 9-anilinoacridines. One member of this class is the clinical agent m-AMSA (NSC 249992). Agent hydrophobicity proved a significant but not a dominant influence on in vivo potency. The electronic properties of substituent groups proved important

  已针对9类苯胺基between啶类化合物中的509种肿瘤活性成员，在抗白血病（L1210）活性与药物理化性质之间建立了定量关系（QSAR）。此类药物之一是临床药物m-AMSA（NSC 249992）。试剂疏水性已证明对体内效力有显着但非主要的影响。取代基的电子性质被证明是重要的，但是对药物效力的最显着影响是通过位于9-苯胺基cr啶骨架上不同位置的基团的空间影响显示出来的。这些结果与这些化合物发挥作用的重要生理步骤完全一致，它们是通过在碱基对之间插入idine啶发色团并在小沟中放置苯胺基而将它们与双链DNA结合的，如前所述。还推导了9-苯胺基cr啶的643种衍生物的急性毒性方程。该方程采用与模拟抗白血病药效价相似的形式，强调了抗肿瘤药的药效和急性毒性之间通常相当紧密的关系。这项研究证明了QSAR技术的强大功能，可以构建大量的生物学数据，并允许从中提取有用的信息，这取决于有关化合物的可能作用部
• 7-oxabicycloheptane substituted amide-sulfonamide prostaglandin analogs
  申请人：E. R. Squibb & Sons, Inc.

  公开号：US04632931A1

  公开（公告）日：1986-12-30

  7-Oxabicycloheptane substituted amide-sulfonamide prostaglandin analogs are provided having the structural formula ##STR1## wherein m is 0 to 4; A is --CH.dbd.CH-- or --CH.sub.2 --CH.sub.2 --; n is 1 to 5; Q is --CH.dbd.CH--, --CH.sub.2 --, ##STR2## or a single bond; R is CO.sub.2 H, CO.sub.2 alkyl, CO.sub.2 alkali metal, CO.sub.2 polyhydroxyamine salt, --CH.sub.2 OH, ##STR3## wherein R.sup.4 and R.sup.5 are the same or different and are H, lower alkyl, hydroxy, lower alkoxy or aryl, at least one of R.sup.4 and R.sup.5 being other than hydroxy and lower alkoxy; p is 1 to 4; R.sup.1 is H or lower alkyl; q is 1 to 12; R.sup.2 is H or lower alkyl; and R.sup.3 is lower alkyl, aryl, arylalkyl, cycloalkyl or cycloalkylalkyl. The compounds are cardiovascular agents useful, for example, in the treatment of thrombotic disease.

  提供了具有结构式##STR1##的7-氧代双环庚烷取代酰胺-磺胺基前列腺素类似物，其中m为0至4；A为--CH.dbd.CH--或--CH.sub.2 --CH.sub.2 --；n为1至5；Q为--CH.dbd.CH--，--CH.sub.2 --，##STR2##或单键；R为CO.sub.2 H，CO.sub.2烷基，CO.sub.2碱金属，CO.sub.2多羟胺盐，--CH.sub.2 OH，##STR3##其中R.sup.4和R.sup.5相同或不同，为H，低烷基，羟基，低烷氧基或芳基，R.sup.4和R.sup.5中至少有一个不是羟基和低烷氧基；p为1至4；R.sup.1为H或低烷基；q为1至12；R.sup.2为H或低烷基；R.sup.3为低烷基，芳基，芳基烷基，环烷基或环烷基烷基。这些化合物是心血管药物，例如，在治疗血栓性疾病中有用。
• FLAP MODULATORS
  申请人：JANSSEN PHARMACEUTICA NV

  公开号：US20150259357A1

  公开（公告）日：2015-09-17

  The present invention relates to compounds of Formula (I), or a form thereof, wherein ring A, R 1 , R 2 , R 3 , R 3 ′, L, W, and V are as defined herein, useful as FLAP modulators. The invention also relates to pharmaceutical compositions comprising compounds of Formula (I). Methods of making and using the compounds of Formula (I) are also within the scope of the invention

  本发明涉及式（I）的化合物，或其形式，其中环A，R1，R2，R3，R3'，L，W和V如本文所定义，可用作FLAP调节剂。该发明还涉及包含式（I）化合物的药物组合物。制备和使用式（I）化合物的方法也属于本发明的范围。
• [EN] HYDANTOIN CONTAINING DEOXYURIDINE TRIPHOSPHATASE INHIBITORS<br/>[FR] HYDANTOÏNE CONTENANT DES INHIBITEURS DE LA DÉSOXYURIDINE TRIPHOSPHATASE
  申请人：CV6 THERAPEUTICS NI LTD

  公开号：WO2018098206A1

  公开（公告）日：2018-05-31

  Provided herein are dUTPase inhibitors, compositions comprising such compounds and methods of using such compounds and compositions.

  提供的是dUTPase抑制剂，包含此类化合物的组合物以及使用此类化合物和组合物的方法。