2-氰基-苯乙酸 | 18698-99-2

• 物质功能分类: 有机原料 - 羧酸类化合物及衍生物
• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 中文名称: 2-氰基-苯乙酸
• 中文别名: 2-氰基苯乙酸；2-(2-氰基苯基)乙酸
• 英文名称: 2-(2-cyanophenyl)acetic acid
• 英文别名: 2-cyanophenylacetic acid；(2-Cyanophenyl)acetic acid
• CAS: 18698-99-2
• 化学式: C₉H₇NO₂
• mdl: MFCD01646238
• 分子量: 161.16
• InChiKey: QLHZKPQKYARBGT-UHFFFAOYSA-N

物化性质

• 熔点：
  122-123℃
• 沸点：
  334℃
• 密度：
  1.26
• 闪点：
  156℃

计算性质

• 辛醇/水分配系数(LogP)：
  1.1
• 重原子数：
  12
• 可旋转键数：
  2
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.111
• 拓扑面积：
  61.1
• 氢给体数：
  1
• 氢受体数：
  3

安全信息

• 海关编码：
  2926909090
• 危险性防范说明：
  P261,P280,P305+P351+P338
• 危险性描述：
  H302,H315,H319,H332,H335
• 储存条件：
  室温

SDS

Material Safety Data Sheet

---

Section 1. Identification of the substance
Product Name: (2-Cyanophenyl)acetic acid
Synonyms:

---

Section 2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.
H302: Harmful if swallowed
H319: Causes serious eye irritation
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present
and easy to do – continue rinsing

---

Section 3. Composition/information on ingredients.
Ingredient name: (2-Cyanophenyl)acetic acid
CAS number: 18698-99-2

---

Section 4. First aid measures
Skin contact: Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
Eye contact:
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion: Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

---

Section 5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

---

Section 6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution: Wear approved mask/respirator
Hand precaution: Wear suitable gloves/gauntlets
Skin protection: Wear suitable protective clothing
Eye protection: Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

---

Section 7. Handling and storage
Handling: This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Storage: Store in closed vessels.

---

Section 8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

---

Section 9. Physical and chemical properties
Appearance: Not specified
Boiling point: No data
Melting point: No data
Flash point: No data
Density: No data
Molecular formula: C9H7NO2
Molecular weight: 161.2

---

Section 10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides.

---

Section 11. Toxicological information
No data.

---

Section 12. Ecological information
No data.

---

Section 13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

---

Section 14. Transportation information
Non-harzardous for air and ground transportation.

---

Section 15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  2-氰基-苯乙酸 在 吡啶 、 草酰氯 、 copper(II) acetate monohydrate 、 caesium carbonate 、 N,N-二甲基甲酰胺 作用下， 以 二氯甲烷 、 二甲基亚砜 、 丙酮 为溶剂， 反应 12.67h， 生成 吡仑帕奈
  参考文献：
  名称：

  [EN] PROCESS FOR THE PREPARATION OF PERAMPANEL
  [FR] PROCÉDÉS POUR LA PRÉPARATION DE PÉRAMPANEL

  摘要：

  公开号：

  WO2015013520A9
• 作为产物：
  描述：

  2-氨基苯乙酸 生成 2-氰基-苯乙酸
  参考文献：
  名称：

  THE o-FORMYL- AND o-ACETYL-PHENYLACETIC ACIDS

  摘要：

  DOI：

  10.1021/jo01129a006

文献信息

• Structure-Based Optimization and Discovery of M3258, a Specific Inhibitor of the Immunoproteasome Subunit LMP7 (β5i)
  作者：Markus Klein、Michael Busch、Manja Friese-Hamim、Stefano Crosignani、Thomas Fuchss、Djordje Musil、Felix Rohdich、Michael P. Sanderson、Jeyaprakashnarayanan Seenisamy、Gina Walter-Bausch、Ugo Zanelli、Philip Hewitt、Christina Esdar、Oliver Schadt

  DOI：10.1021/acs.jmedchem.1c00604

  日期：2021.7.22

  acids, which selectively inhibit LMP7 while sparing all other subunits. The exploitation of structural differences between the proteasome subunits culminated in the identification of the highly potent, exquisitely selective, and orally available LMP7 inhibitor 50 (M3258). Based on the strong antitumor activity observed with M3258 in MM models and a favorable preclinical data package, a phase I clinical

  蛋白酶体是泛素依赖性蛋白质降解途径中广泛表达的关键成分，其中包含具有催化活性的亚基（β1、β2 和 β5）。LMP7 (β5i) 是免疫蛋白酶体的一个亚基，是一种主要在造血细胞中表达的诱导型异构体。用于治疗多发性骨髓瘤 (MM) 的临床有效的泛蛋白酶体抑制剂非选择性靶向 LMP7 和组成型蛋白酶体和免疫蛋白酶体的其他亚基，具有相当的效力，这可能会限制这些药物的治疗适用性。在这里，我们描述了新型酰氨基硼酸的发现和基于结构的命中优化，它选择性地抑制 LMP7，同时保留所有其他亚基。对蛋白酶体亚基之间结构差异的开发最终确定了高效能，50 (M3258)。基于 M3258 在 MM 模型中观察到的强大抗肿瘤活性和有利的临床前数据包，在复发/难治性 MM 患者中启动了 I 期临床试验。
• [EN] NRF2 REGULATORS<br/>[FR] RÉGULATEURS DE NRF2
  申请人：GLAXOSMITHKLINE IP DEV LTD

  公开号：WO2016203401A1

  公开（公告）日：2016-12-22

  The present invention relates to aryl analogs, pharmaceutical compositions containing them and their use as Nrf2 regulators.

  本发明涉及芳基类似物，含有它们的药物组合物以及它们作为Nrf2调节剂的用途。
• [EN] 3-(2,3-DIHYDRO-1H-INDEN-5-YL)PROPANOIC ACID DERIVATIVES AND THEIR USE AS NRF2 REGULATORS<br/>[FR] DÉRIVÉS D'ACIDE PROPANOÏQUE 3-(2,3-DIHYDRO-1H-INDEN-5-YL) ET LEUR UTILISATION EN TANT QUE RÉGULATEURS DE NRF2
  申请人：GLAXOSMITHKLINE IP DEV LTD

  公开号：WO2018104766A1

  公开（公告）日：2018-06-14

  The present invention relates to compounds of Formula (I), and Formula (II), wherein B is benzotriazolyl, phenyl, triazolopyridinyl, or -(CH2)2-triazolyl each of which may be unsubstituted or substituted by 1, 2, or 3 substituents independently chosen from -C1-3 alkyl, -O-C1-3 alkyl, CN, - (CH2)2-O-(CH2)2-OR4 and halo; and D is -C(O)OH, -C(O)NHSO2CH3, -SO2NHC(O)CH3, 5-(trifluoromethyl)-4H-1,2,4-triazol-2-yl, or tetrazolyl; and their use as NRF2 regulators.

  本发明涉及式(I)和式(II)的化合物，其中B为苯并三唑基、苯基、三唑吡啶基或-(CH2)2-三唑基，每种基团可以是未取代的或被1、2或3个取代基取代，所述取代基独立地选自-C1-3烷基、-O-C1-3烷基、CN、-(CH2)2-O-(CH2)2-OR4和卤素；D为-C(O)OH、-C(O)NHSO2CH3、-SO2NHC(O)CH3、5-(三氟甲基)-4H-1,2,4-三唑-2-基或四唑基；以及它们作为NRF2调节剂的用途。
• Direct Catalytic Enantioselective Benzylation from Aryl Acetic Acids
  作者：Patrick J. Moon、Zhongyu Wei、Rylan J. Lundgren

  DOI：10.1021/jacs.8b11390

  日期：2018.12.19

  We demonstrate that metal-catalyzed enantioselective benzylation reactions of allylic electrophiles can occur directly from aryl acetic acids. The reaction proceeds via a pathway in which decarboxylation is the terminal event, occurring after stereoselective carbon-carbon bond formation. This mechanistic feature enables enantioselective benzylation without the generation of a highly basic nucleophile

  我们证明了金属催化的烯丙基亲电试剂的对映选择性苄基化反应可以直接从芳基乙酸中发生。该反应通过其中脱羧是最终事件的途径进行，发生在立体选择性碳-碳键形成之后。这种机制特征可以实现对映选择性苄基化，而不会产生强碱性亲核试剂。因此，该过程具有广泛的官能团兼容性，这在采用已建立的协议时是不可能的。
• 一种苯乙酸类化合物的制备方法
  申请人：江苏联化科技有限公司

  公开号：CN109320413B

  公开（公告）日：2021-07-30

  本发明公开了一种苯乙酸类化合物的制备方法。所述的苯乙酸类化合物I的制备方法，其包括下述的步骤：在溶剂中，在CO的气相体系中，将卤苄类化合物II、吡啶‑2‑羧酸钴、醋酸钯和碱性中和剂进行羰基化反应，得到所述的苯乙酸类化合物I即可。本发明的混合催化体系具有协同效应，大大降低催化剂的整体使用量。采用本发明的混合催化剂可以达到更好的催化效果，具有催化剂更易于得到、避免有毒三废等生产安全风险、减少反应压力、反应条件温和、降低生产风险、更利于生产等特点。