4-正丁氧基苯磺酰氯 | 1138-56-3

• 物质功能分类: 有机原料 - 羧酸类化合物及衍生物 - 羧酸酰卤化物
• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 中文名称: 4-正丁氧基苯磺酰氯
• 中文别名: 4-丁氧基苯磺酰氯；4-(N-丁氧基)苯磺酰氯；4-丁氧基苯-1-磺酰氯
• 英文名称: 4-butoxybenzene-sulfonyl chloride
• 英文别名: 4-(n-butoxy)phenylsulfonyl chloride；4-(n-Butoxy)benzenesulfonyl chloride；4-butoxybenzenesulfonyl chloride
• CAS: 1138-56-3
• 化学式: C₁₀H₁₃ClO₃S
• mdl: MFCD00052344
• 分子量: 248.73
• InChiKey: HGKWMUBXVMFXNC-UHFFFAOYSA-N

物化性质

• 熔点：
  19 °C
• 沸点：
  156 °C
• 密度：
  1.246±0.06 g/cm3(Predicted)
• 闪点：
  130-131°C/0.6mm
• 稳定性/保质期：
  如果按照规格使用和储存，则不会分解，不存在已知危险反应。应避免与氧化物、水分或潮湿的碱接触。

计算性质

• 辛醇/水分配系数(LogP)：
  3.5
• 重原子数：
  15
• 可旋转键数：
  5
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.4
• 拓扑面积：
  51.8
• 氢给体数：
  0
• 氢受体数：
  3

安全信息

• 危险等级：
  8
• 危险品标志：
  C
• 安全说明：
  S26,S36/37/39
• 危险类别码：
  R34
• 海关编码：
  2909309090
• 包装等级：
  III
• 危险类别：
  8
• 危险品运输编号：
  3265
• 危险性防范说明：
  P260,P264,P280,P301+P330+P331,P303+P361+P353,P304+P340,P305+P351+P338,P310,P321,P363,P405,P501
• 危险性描述：
  H314
• 储存条件：
  请将贮藏器保持密封状态，并存放在阴凉、干燥处。确保工作环境有良好的通风或排气设施。

SDS

Name:	4-Butoxybenzene-1-sulfonyl chloride 97% Material Safety Data Sheet
Synonym:
CAS:	1138-56-3

Section 1 - Chemical Product MSDS Name:4-Butoxybenzene-1-sulfonyl chloride 97% Material Safety Data Sheet
Synonym:

---

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS

CAS#	Chemical Name	content	EINECS#
1138-56-3	4-Butoxybenzene-1-sulfonyl chloride	97%	unlisted

Hazard Symbols: C
Risk Phrases: 34

---

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Not available.

---

Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

---

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

---

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container.

---

Section 7 - HANDLING and STORAGE
Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area. Store under nitrogen.

---

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 1138-56-3: Personal Protective Equipment Eyes: Not available.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

---

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Liquid
Color: Not available.
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 130 - 132 deg C @0.6mmHg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C10H13ClO3S
Molecular Weight: 249

---

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents, bases.
Hazardous Decomposition Products:
Hydrogen chloride, chlorine, carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported

---

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 1138-56-3 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-Butoxybenzene-1-sulfonyl chloride - Not listed by ACGIH, IARC, or NTP.

---

Section 12 - ECOLOGICAL INFORMATION

---

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

---

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3265
Packing Group: III
IMO
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3265
Packing group: III

---

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 1138-56-3: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 1138-56-3 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 1138-56-3 is not listed on the TSCA inventory.
It is for research and development use only.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

上下游信息

• 下游产品

  中文名称	英文名称	CAS号	化学式	分子量
  4-(N-丁氧基)苯磺酰胺	4-n-butoxybenzenesulfonamide	1138-58-5	C10H15NO3S	229.3
  ——	4-butoxy-N-(2-chloroethyl)benzenesulfonamide	——	C12H18ClNO3S	291.79
  ——	N-(2-aminoethyl)-4-butoxybenzenesulfonamide	——	C12H20N2O3S	272.368
  ——	N-(2-aminoethyl)-4-(pentyloxy)-benzenesulfonamide	1170071-73-4	C13H22N2O3S	286.395
  ——	N,N'-ethane-1,2-diylbis(4-butoxybenzenesulfonamide)	——	C22H32N2O6S2	484.638

反应信息

• 作为反应物：
  描述：

  4-正丁氧基苯磺酰氯 在 氨 作用下， 以 二氯甲烷 为溶剂， 反应 4.0h， 以76.2%的产率得到4-(N-丁氧基)苯磺酰胺
  参考文献：
  名称：

  取代的磺酰基-N-羟基胍衍生物作为潜在的抗肿瘤剂的合成及细胞毒性评估。

  摘要：

  以铅化合物LY-181984为基础，设计合成了一系列磺酰基-N-羟基胍衍生物，作为潜在的抗癌药进行细胞毒性评价。用羟基胍代替前导化合物的脲基部分提供了稳定的细胞毒剂。磺酰基-N-羟基胍衍生物的构象，例如N-（4-氯苯基）-N'-[（苯并[2,1,3]噻二唑-4-基）磺酰基] -N“-羟基胍（4g），使用HMBC NMR，理论计算和X射线晶体学研究表明，这两个芳环堆叠在一起，并评估了这些衍生物对5种人类肿瘤细胞系的体外细胞毒性，包括HepG2，TSGH 8302，COLO 205，KB和MOLT -4。衍生化合物对人肿瘤细胞系的细胞毒活性等于或大于先导化合物。N-（4-氯苯基）-N'-[[3,5-二氯-4-（4-硝基苯氧基）苯基]磺酰基]-N“-羟基胍（4n）和N-（4-氯苯基）-N'- [[3，5-二氯-4-（2-氯-4-硝基苯氧基）苯基]磺酰基] -N”-羟基胍（4o）对实体瘤细胞系表现

  DOI：

  10.1021/jm9607818
• 作为产物：
  描述：

  sodium p-hydroxybenzenesulfonate 在 氯化亚砜 、 N,N-二甲基甲酰胺 、 sodium hydroxide 作用下， 以 二氯甲烷 、 N,N-二甲基甲酰胺 为溶剂， 反应 24.0h， 生成 4-正丁氧基苯磺酰氯
  参考文献：
  名称：

  Design and bio-evaluation of indole derivatives as potent Kv1.5 inhibitors

  摘要：

  Atrial fibrillation (AF) is one of the common arrhythmias that threaten human health. Kv1.5 potassium channel is reported as an efficacious and safe target for the treatment of AF. In this paper, we designed and synthesized three series of compounds through modifying the lead compound RH01617 that was screened out by the pharmacophore model we reported earlier. All of the compounds were evaluated by the whole-patch lamp technology and most of them possessed potent inhibitory activities against Kv1.5. Compounds IIIi and IIIl were evaluated for the target selectivity as well as the pharmacodynamic effects in an isolated rat model. Due to the promising pharmacological behavior, compound IIIl deserves further pharmacodynamic and pharmacokinetic evaluations. (C) 2013 Elsevier Ltd. All rights reserved.

  DOI：

  10.1016/j.bmc.2013.08.041

文献信息

• BIS-AROMATIC COMPOUNDS USEFUL IN THE TREATMENT OF INFLAMMATION
  申请人：Pelcman Benjamin

  公开号：US20100286215A1

  公开（公告）日：2010-11-11

  There is provided compounds of formula (I): wherein Y, ring A, D 1 , D 2 , D 3 , L 1 , Y 1 , L 2 , Y 2 , L 3 and Y 3 have meanings given in the description, and pharmaceutically-acceptable salts thereof, which compounds are useful in the treatment of diseases in which inhibition of leukotriene C 4 synthase is desired and/or required, and particularly in the treatment of a respiratory disorder and/or inflammation.

  提供了具有以下式（I）的化合物：其中Y、环A、D1、D2、D3、L1、Y1、L2、Y2、L3和Y3的含义如描述中所示，并且其药学上可接受的盐，这些化合物在治疗需要或者期望抑制白三烯C4合酶的疾病中非常有用，特别是在治疗呼吸道疾病和/或炎症方面。
• [EN] HEPATITIS B VIRAL ASSEMBLY EFFECTORS<br/>[FR] EFFECTEURS D'ASSEMBLAGE DE VIRUS DE L'HÉPATITE B
  申请人：UNIV INDIANA RES & TECH CORP

  公开号：WO2016168619A1

  公开（公告）日：2016-10-20

  Novel assembly effector compounds having a therapeutic effect against hepatitis B viral (HBV) infection are disclosed. Assembly effector molecules described herein can lead to defective viral assembly and also may affect other viral activities associated with chronic HBV infection. Also disclosed is a process to synthesize disclosed compounds, method of treatment of HBV by administration of disclosed compounds, and use of these compounds in the manufacture of medicaments against HBV.

  揭示了一种对乙型肝炎病毒（HBV）感染具有治疗效果的新型组装效应子化合物。本文描述的组装效应子分子可以导致病毒组装缺陷，也可能影响与慢性HBV感染相关的其他病毒活动。还公开了一种合成所述化合物的方法，通过给予所述化合物治疗HBV的方法，以及利用这些化合物制造针对HBV的药物的用途。
• Pyrrolidine derivatives
  申请人：——

  公开号：US20020049243A1

  公开（公告）日：2002-04-25

  The present invention relates to pyrrolidine derivatives and dimeric forms and/or pharmaceutically acceptable esters, and/or salts thereof. The compounds are useful as inhibitors of metalloproteases, e.g. zinc proteases, particularly zinc hydrolases, and which are effective in treating disease states are associated with vasoconstriction of increasing occurrences.

  本发明涉及吡咯烷衍生物及其二聚体形式和/或药用可接受的酯和/或盐。这些化合物可用作金属蛋白酶抑制剂，例如锌蛋白酶，特别是锌水解酶，对治疗与血管收缩增加发生相关的疾病状态有效。
• Development of New Hydroxamate Matrix Metalloproteinase Inhibitors Derived from Functionalized 4-Aminoprolines
  作者：Michael G. Natchus、Roger G. Bookland、Biswanath De、Neil G. Almstead、Stanislaw Pikul、Michael J. Janusz、Sandra A. Heitmeyer、Erin B. Hookfin、Lily C. Hsieh、Martin E. Dowty、Charles R. Dietsch、Vikram S. Patel、Susan M. Garver、Fei Gu、Matthew E. Pokross、Glen E. Mieling、Timothy R. Baker、David J. Foltz、Sean X. Peng、David M. Bornes、Michael J. Strojnowski、Yetunde O. Taiwo

  DOI：10.1021/jm000246e

  日期：2000.12.1

  activity with sub-nanomolar potency for some enzymes. Modifications of the P1' portion of the molecule played a key role in affecting both potency and selectivity within the MMP family. Longer-chain aliphatic substituents in this region of the molecule tended to increase potency for MMP-3 and decrease potency for MMP-1, as exemplified by compounds 48-50, while aromatic substituents, as in compound 52, generated

  从氨基脯氨酸支架制备了一系列异羟肟酸酯，并测试了其作为基质金属蛋白酶（MMP）抑制剂的功效。据报道该系列的详细SAR是针对MMP家族中的5种酶，许多抑制剂（例如化合物47）具有广谱活性，某些酶具有亚纳摩尔的效力。分子P1'部分的修饰在影响MMP家族内的效能和选择性方面起着关键作用。如化合物48-50所示，在分子的该区域中的长链脂族取代基倾向于增加对MMP-3的效力而降低对MMP-1的效力，而如化合物52中的芳族取代基产生广谱抑制作用。该数据基于X射线晶体数据也被合理化。虽然体外经口吸收似乎不太可预测，但随着更长和更多亲水性取代基的出现，吸收率往往会降低。最后，使用骨关节炎的大鼠模型评估这些化合物的功效，并在它们的药代动力学和体内功效之间建立了直接联系。
• [EN] SOMATOSTATIN RECEPTOR 1 AND/OR 4 SELECTIVE AGONISTS AND ANTAGONISTS<br/>[FR] AGONISTES ET ANTAGONISTES SELECTIFS DU RECEPTEUR DE LA SOMATOSTATINE 1 ET/OU 4
  申请人：JUVANTIA PHARMA LTD OY

  公开号：WO2005033069A1

  公开（公告）日：2005-04-14

  The invention relates to (hetero)arylsulfonylamino based peptidomimetics of formula (I), wherein R1, R2, R3, A, B, D, Q, k and n are defined as disclosed, or a pharmaceutically acceptable salt or ester thereof. Compounds of formula (I) possess high affinity and selectivity for the somatostatin receptor subtypes SSTR1 and/or SSTR4 and can be used for the treatment or diagnosis of diseases or conditions wherein an interaction with SSTR1 and/or SSTR4 is indicated to be useful.

  这项发明涉及基于(杂)芳基磺酰胺的肽类模拟物，其化学式为(I)，其中R1、R2、R3、A、B、D、Q、k和n的定义如所披露的，或其药学上可接受的盐或酯。化合物的化学式(I)具有对生长抑素受体亚型SSTR1和/或SSTR4的高亲和力和选择性，并可用于治疗或诊断需要与SSTR1和/或SSTR4相互作用的疾病或病况。

表征谱图