5-降冰片烯-2-羧酸叔丁酯 | 154970-45-3

• 物质功能分类: 化学试剂 - 有机试剂 - 酯类
• 分子结构分类: 有机化合物 - 有机酸及其衍生物 - 羧酸及其衍生物
• 中文名称: 5-降冰片烯-2-羧酸叔丁酯
• 中文别名: 双环[2.2.1]-5-庚烯-2-甲酸叔丁酯；T-丁基-5-降冰片-2-羧酸盐；四叔丁基-5-降冰片烯-2-羧酸酯；双环[2.2.1]庚-5-烯-2-羧酸叔丁酯
• 英文名称: tert-butyl bicyclo[2.2.1]hept-5-ene-2-carboxylate
• 英文别名: bicyclo(2,2,1)hept-5-ene-2-carboxylic acid-t-butyl ester
• CAS: 154970-45-3
• 化学式: C₁₂H₁₈O₂
• 分子量: 194.274
• InChiKey: BZBMBZJUNPMEBD-UHFFFAOYSA-N

物化性质

• 沸点：
  243°C
• 密度：
  1.046
• 闪点：
  92°C

计算性质

• 辛醇/水分配系数(LogP)：
  2.5
• 重原子数：
  14
• 可旋转键数：
  3
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.75
• 拓扑面积：
  26.3
• 氢给体数：
  0
• 氢受体数：
  2

安全信息

• 海关编码：
  2916209090
• 危险性防范说明：
  P261,P305+P351+P338
• 危险性描述：
  H302,H315,H319,H335

SDS

tert-Butyl 5-Norbornene-2-carboxylate (endo- and exo- Revision number: 5.3
mixture)
SAFETY DATA SHEET

---

Section 1. IDENTIFICATION
Product name: tert-Butyl 5-Norbornene-2-carboxylate (endo- and exo- mixture)

Revision number: 5.3

---

Section 2. HAZARDS IDENTIFICATION
GHS classification
PHYSICAL HAZARDS
Category 4
Flammable liquids
HEALTH HAZARDS
Category 2
Skin corrosion/irritation
Serious eye damage/eye irritation Category 2A
ENVIRONMENTAL HAZARDS Not classified
GHS label elements, including precautionary statements
Pictograms or hazard symbols
Signal word Warning
Combustible liquid
Hazard statements
Causes skin irritation
Causes serious eye irritation
Precautionary statements:
Keep away from flames and hot surfaces.
[Prevention]
Wash hands thoroughly after handling.
Wear protective gloves and eye/face protection.
[Response] IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,
if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical advice/attention.
IF ON SKIN: Gently wash with plenty of soap and water.
If skin irritation occurs: Get medical advice/attention.
Take off contaminated clothing and wash before reuse.
[Storage] Store in a well-ventilated place. Keep cool.
[Disposal] Dispose of contents/container through a waste management company authorized by
the local government.

---

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
Substance/mixture: Substance
tert-Butyl 5-Norbornene-2-carboxylate (endo- and exo- mixture)
Components:
Percent: >95.0%(GC)
CAS Number: 154970-45-3
and exo- mixture)

---

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
Synonyms: 5-Norbornene-2-carboxylic Acid tert-Butyl Ester (endo- and exo- mixture) , tert-Butyl
Bicyclo[2.2.1]hept-5-ene-2-carboxylate (endo- and exo- mixture) , Bicyclo[2.2.1]hept-
5-ene-2-carboxylic Acid tert-Butyl Ester (endo- and exo- mixture)
Chemical Formula: C12H18O2

---

Section 4. FIRST AID MEASURES
Remove victim to fresh air and keep at rest in a position comfortable for breathing.
Inhalation:
Get medical advice/attention if you feel unwell.
Remove/Take off immediately all contaminated clothing. Gently wash with plenty of
Skin contact:
soap and water. If skin irritation or rash occurs: Get medical advice/attention.
Eye contact: Rinse cautiously with water for several minutes. Remove contact lenses, if present
and easy to do. Continue rinsing. If eye irritation persists: Get medical
advice/attention.
Ingestion: Get medical advice/attention if you feel unwell. Rinse mouth.
Protection of first-aiders: A rescuer should wear personal protective equipment, such as rubber gloves and air-
tight goggles.

---

Section 5. FIRE-FIGHTING MEASURES
Suitable extinguishing Dry chemical, foam, carbon dioxide.
media:
Unsuitable extinguishing Water (It may scatter and spread fire.)
media:
Precautions for firefighters: Fire-extinguishing work is done from the windward and the suitable fire-extinguishing
method according to the surrounding situation is used. Uninvolved persons should
evacuate to a safe place. In case of fire in the surroundings: Remove movable
containers if safe to do so.
Special protective When extinguishing fire, be sure to wear personal protective equipment.
equipment for firefighters:

---

Section 6. ACCIDENTAL RELEASE MEASURES
Use personal protective equipment. Keep people away from and upwind of spill/leak.
Personal precautions,
protective equipment and Ensure adequate ventilation. Entry to non-involved personnel should be controlled
emergency procedures: around the leakage area by roping off, etc.
Environmental precautions: Prevent product from entering drains.
Methods and materials for Absorb spilled material in a suitable absorbent (e.g. rag, dry sand, earth, saw-dust).
containment and cleaning In case of large amount of spillage, contain a spill by bunding. Adhered or collected
up: material should be promptly disposed of, in accordance with appropriate laws and
regulations.
Prevention of secondary Remove all sources of ignition. Fire-extinguishing devices should be prepared in
hazards: case of a fire. Use spark-proof tools and explosion-proof equipment.

---

Section 7. HANDLING AND STORAGE
Precautions for safe handling
Technical measures: Handling is performed in a well ventilated place. Wear suitable protective equipment.
Prevent generation of vapour or mist. Keep away from flames and hot surfaces. Take
measures to prevent the build up of electrostatic charge. Use explosion-proof
equipment. Wash hands and face thoroughly after handling.
Use a closed system, ventilation.
Advice on safe handling: Avoid contact with skin, eyes and clothing.
Conditions for safe storage, including any
incompatibilities
Storage conditions: Keep container tightly closed. Store in a cool, dark and well-ventilated place.
Store away from incompatible materials such as oxidizing agents.
Comply with laws.
Packaging material:
and exo- mixture)

---

Section 8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Engineering controls: Install a closed system or local exhaust as possible so that workers should not be
exposed directly. Also install safety shower and eye bath.
Personal protective equipment
Respiratory protection: Vapor respirator. Follow local and national regulations.
Hand protection: Protective gloves.
Safety glasses. A face-shield, if the situation requires.
Eye protection:
Skin and body protection: Protective clothing. Protective boots, if the situation requires.

---

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
Physical state (20°C): Liquid
Clear
Form:
Colour: Colorless - Very pale yellow
No data available
Odour:
pH: No data available
Melting point/freezing point:No data available
Boiling point/range: 103°C/1.3kPa
Flash point: No data available
Flammability or explosive
limits:
Lower: No data available
Upper: No data available
Relative density: 0.98
Solubility(ies):
[Water] No data available
[Other solvents] No data available

---

Section 10. STABILITY AND REACTIVITY
Chemical stability: Stable under proper conditions.
Possibility of hazardous No special reactivity has been reported.
reactions:
Conditions to avoid: Open flame
Incompatible materials: Oxidizing agents
Hazardous decomposition Carbon monoxide, Carbon dioxide
products:

---

Section 11. TOXICOLOGICAL INFORMATION
Acute Toxicity: No data available
Skin corrosion/irritation: No data available
Serious eye No data available
damage/irritation:
Germ cell mutagenicity: No data available
Carcinogenicity:
IARC = No data available
NTP = No data available
Reproductive toxicity: No data available

---

Section 12. ECOLOGICAL INFORMATION
Ecotoxicity:
Fish: No data available
Crustacea: No data available
No data available
Algae:
Persistence / degradability: No data available
No data available
Bioaccumulative
potential(BCF):
Mobility in soil
Log Pow: No data available
and exo- mixture)

---

Section 12. ECOLOGICAL INFORMATION
Soil adsorption (Koc): No data available
Henry's Law No data available
constant(PaM3/mol):

---

Section 13. DISPOSAL CONSIDERATIONS
Recycle to process, if possible. Consult your local regional authorities. You may be able to burn in a chemical
incinerator equipped with an afterburner and scrubber system. Observe all federal, state and local regulations when
disposing of the substance.

---

Section 14. TRANSPORT INFORMATION
Hazards Class: Does not correspond to the classification standard of the United Nations
UN-No: Not listed

---

Section 15. REGULATORY INFORMATION
Safe management ordinance of dangerous chemical product (State Council announces on January 26, 2002
and revised on February 16,2011): Safe use and production, the storage of a dangerous chemical, transport,
loading and unloading were prescribed.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

制备方法与用途

5-降冰片烯-2-羧酸叔丁酯主要用于医药、有机及材料行业的中间体。

反应信息

• 作为反应物：
  描述：

  5-降冰片烯-2-羧酸叔丁酯 在 potassium permanganate 作用下， 以 丙酮 为溶剂， 反应 2.5h， 以80%的产率得到2-t-butoxycarbonylnorbornan-5,6-diol
  参考文献：
  名称：

  Copolymer resin, preparation thereof, and photoresist using the same

  摘要：

  本发明涉及一种用于KrF或ArF等超短波光源的共聚物树脂，其制备方法以及含有相同树脂的光刻胶。根据本发明的共聚物树脂由于在光刻胶的共聚物结构中引入了去环戊烯基（甲基）丙烯酸酯单元，因此可以通过常规自由基聚合轻松制备。该树脂在193纳米波长下具有高透明度，由于去环戊烯基中的亲水性功能基团，提供了增强的刻蚀抗性和增强的粘接强度，并在实际的图案制备实验中显示出0.15微米的优异分辨率。

  公开号：

  US06372935B1
• 作为产物：
  描述：

  二聚环戊二烯 在 lewis acid 作用下， 以 二氯甲烷 为溶剂， 生成 5-降冰片烯-2-羧酸叔丁酯
  参考文献：
  名称：

  Oxathiaborolium催化的对映选择性[4+2]环加成及其在路易斯酸配位和手性路易斯酸催化的[4+2]环加成反应中的应用

  摘要：

  由嗜盐路易斯酸 SnCl 4产生的第二代硫稳定化硼阳离子的新生产生了高活性的手性路易斯酸，它是 [4 + 2] 环加成的非常有效的催化剂。Oxathiaborolium 五氯锡酸盐（5-10 mol%）成功地催化了各种二烯和亲二烯体的环加成反应，得到了具有优异对映选择性的环加合物（20 个例子，高达 99% ee）。这种超级路易斯酸对第一个路易斯酸配位和手性路易斯酸催化[4 + 2]环加成到α,β-不饱和混合酯酰胺也表现出良好的对映选择性。

  DOI：

  10.1021/acs.orglett.1c02345
• 作为试剂：
  描述：

  二乙基硅烷 、 、 苯基锂 在 tris(triphenylphosphine)ruthenium(II) chloride 、 bis(1,5-cyclooctadiene)diiridium(I) dichloride 、 3,4,7,8-四甲基-1,10-菲罗啉 、 5-降冰片烯-2-羧酸叔丁酯 作用下， 以 四氢呋喃 为溶剂， 以55%的产率得到(1R,2S,3S)-2-((diethyl(phenyl)silyl)methyl)-2,3-dimethyl-3-phenylcyclobutan-1-ol
  参考文献：
  名称：

  通过连续还原/C-H 官能化催化对映选择性合成苯并环丁烯醇和环丁醇

  摘要：

  我们在这里报告了连续的对映选择性还原/C-H官能化，以安装苯并环丁烯醇和环丁醇的连续立体碳中心。该策略的特点是酮的实用对映选择性还原和非对映特异性铱催化的 C-H 硅烷化。进一步的转化已经被探索，包括可控的区域选择性开环反应。此外，该策略已用于合成三种天然产物：叶绿素（拟定结构）、大茴香醇和芳香醇。

  DOI：

  10.1039/d1sc02119b

文献信息

• Salt suitable for an acid generator and a chemically amplified resist composition containing the same
  申请人：Harada Yukako

  公开号：US20070078269A1

  公开（公告）日：2007-04-05

  The present invention provides a salt of the formula (I): wherein ring Y represents monocyclic or polycyclic hydrocarbon group having 3 to 30 carbon atoms, in which one —CH 2 — group is substituted with —COO— group, and at least one hydrogen atom in the monocyclic or polycyclic hydrocarbon group may optionally be substituted with alkyl group having 1 to 6 carbon atom, alkoxy group having 1 to 6 carbon atom, perfluoroalkyl group having 1 to 4 carbon atoms, hydroxyalkyl group having 1 to 6 carbon atoms, hydroxyl group or cyano group; Q 1 and Q 2 each independently represent fluorine atom or perfluoroalkyl group having 1 to 6 carbon atoms; A + represents organic counter ion; and n shows an integer of 0 to 12. The present invention also provides a chemically amplified resist composition comprising the salt of the formula (I).

  本发明提供了一种具有公式(I)的盐： 其中环Y代表具有3至30个碳原子的单环或多元环烃基团，其中一个—CH2—基团被—COO—基团取代，并且单环或多元环烃基团中的至少一个氢原子可以可选地被具有1至6个碳原子的烷基取代，具有1至6个碳原子的烷氧基，具有1至4个碳原子的全氟烷基，具有1至6个碳原子的羟基烷基，羟基或腈基；Q1和Q2各自独立地代表氟原子或具有1至6个碳原子的全氟烷基；A+代表有机反离子；n表示0至12的整数。 本发明还提供了一种含有公式(I)盐的化学放大抗蚀剂组合物。
• SALT AND PHOTORESIST COMPOSITION CONTAINING THE SAME
  申请人：ICHIKAWA Koji

  公开号：US20100304293A1

  公开（公告）日：2010-12-02

  A salt represented by the formula (a): wherein Q 1 and Q 2 each independently represent a fluorine atom etc., X 1 represents a single bond etc., X 2 represents a single bond etc., Y 1 represents a C3-C6 alicyclic hydrocarbon group etc., with the proviso that —X 2 —Y 1 group has one or more fluorine atoms, and Z + represents an organic counter cation, and a photoresist composition comprising the salt represented by the formula (a) and a resin comprising a structural unit having an acid-labile group and being insoluble or poorly soluble in an aqueous alkali solution but becoming soluble in an aqueous alkali solution by the action of an acid.

  由公式(a)表示的盐：其中Q1和Q2各自独立代表氟原子等，X1代表单键等，X2代表单键等，Y1代表C3-C6的脂环烃基等，但条件是—X2—Y1基团具有一个或多个氟原子，以及Z+代表有机反离子，以及包含由公式(a)表示的盐的光阻剂组合物和包含具有酸不稳定的基团并且在水性碱液中不溶或微溶于但在酸性作用下水性碱液中变得可溶的树脂的结构单元。
• SALT, RESIN, RESIST COMPOSITION AND METHOD FOR PRODUCING RESIST PATTERN
  申请人：SUMITOMO CHEMICAL COMPANY, LIMITED

  公开号：US20160052877A1

  公开（公告）日：2016-02-25

  A salt represented by the formula (I); wherein Q 1 and Q 2 each independently represent a fluorine atom or a C 1 to C 6 perfluoroalkyl group, L b1 represents a single bond or a divalent C 1 to C 24 saturated hydrocarbon groupwhere a methylene group may be replaced by an oxygen atom or a carbonyl group and where a hydrogen atom may be replaced by a hydroxyl group or a fluorine atom, and Y represents a hydrogen atom, a fluorine atom, or an optionally substituted C 3 to C 18 alicyclic hydrocarbon groupwhere a methylene group may be replaced by an oxygen atom, a carbonyl group or a sulfonyl group; and Ar represents a divalent C 6 to C 20 aromatic hydrocarbon group, and Z + represents an organic sulfonium cation or an organic iodonium cation.

  根据您的要求，以下是化合物的中文翻译： 由公式(I)表示的盐； 其中Q1和Q2各自独立代表一个氟原子或一个C1至C6的过氟代烷基团，Lb1代表一个单键或一个二价的C1至C24的饱和烃基团，其中甲基烯基团可以被一个氧原子或一个羰基团所取代，并且其中氢原子可以被一个羟基或一个氟原子所取代，并且Y代表一个氢原子，一个氟原子，或一个可选地被取代的C3至C18的芳环烃基团，其中甲基烯基团可以被一个氧原子，一个羰基团或一个磺酰基团所取代；并且Ar代表一个二价的C6至C20的芳香烃基团，以及Z+代表一个有机硫正离子或一个有机碘正离子。
• SALT, ACID GENERATOR, RESIN, RESIST COMPOSITION AND METHOD FOR PRODUCING RESIST PATTERN
  申请人：SUMITOMO CHEMICAL COMPANY, LIMITED

  公开号：US20160334702A1

  公开（公告）日：2016-11-17

  A salt represented by formula (I): wherein Q 1 and Q 2 independently represent a fluorine atom or a C 1 to C 6 perfluoroalkyl group, R 1 and R 2 in each occurrence independently represent a hydrogen atom, a fluorine atom or a C 1 to C 6 perfluoroalkyl group, z represents an integer of 0 to 6, X 1 represents *—CO—O—, *—O—CO— or —O—, * represents a binding position to C(R 1 )(R 2 ) or C(Q 1 )(Q 2 ), A 1 represents a C 4 to C 24 hydrocarbon group having a C 4 to C 18 divalent alicyclic hydrocarbon moiety, A 2 represents a C 2 to C 12 divalent hydrocarbon group, R 3 and R 4 independently represent a hydrogen atom or a C 1 to C 6 monovalent saturated hydrocarbon group, R 5 represents a hydrogen atom, a fluorine atom, or a C 1 to C 6 alkyl group where a hydrogen atom may be replaced by a fluorine atom, and Z + represents an organic cation.

  公式(I)表示的盐，其中Q1和Q2独立地代表一个氟原子或一个C1至C6的过氟烷基团，R1和R2每次出现独立地代表一个氢原子、一个氟原子或一个C1至C6的过氟烷基团，z代表0到6的整数，X1代表*—CO—O—，*—O—CO—或—O—，*代表与C(R1)(R2)或C(Q1)(Q2)的连接位置，A1代表具有C4至C18二价脂环烃基团的C4至C24的烃基团，A2代表C2至C12的二价烃基团，R3和R4独立地代表一个氢原子或一个C1至C6的一价饱和烃基团，R5代表一个氢原子、一个氟原子或一个C1至C6的烷基团，其中氢原子可以被氟原子替换，而Z+代表一个有机阳离子。
• SALT, ACID GENERATOR, PHOTORESIST COMPOSITION, AND METHOD FOR PRODUCING PHOTORESIST PATTERN
  申请人：SUMITOMO CHEMICAL COMPANY, LIMITED

  公开号：US20160200702A1

  公开（公告）日：2016-07-14

  A salt represented by the formula (I): wherein R 1 represents a C1 to C12 alkyl group in which a methylene group can be replaced by an oxygen atom or a carbonyl group; Q 1 and Q 2 each independently represent a fluorine atom or a C1 to C6 perfluoroalkyl group; A 1 represents a lactone ring-containing group which has 4 to 24 carbon atoms; R 2 represents an acid-labile group; and “m” represents an integer of 0 to 3.

  由公式(I)表示的盐： 其中 R1 代表一个C1至C12的烷基，其中一个亚甲基基团可以被一个氧原子或一个羰基团所取代； Q1 和 Q2 各自独立地代表一个氟原子或一个C1至C6的全氟烷基团； A1 代表一个含有内酯环的基团，该基团有4到24个碳原子； R2 代表一个酸不稳定的基团；并且 “m”代表一个0到3之间的整数。