十氢2-萘酚乙酸酯 | 10519-11-6

• 物质功能分类: 有机原料 - 羧酸类化合物及衍生物 - 羧酸酯及其衍生物
• 分子结构分类: 有机化合物 - 有机酸及其衍生物 - 羧酸及其衍生物
• 中文名称: 十氢2-萘酚乙酸酯
• 中文别名: β-十氢化萘乙酸酯；-十氢化萘乙酸酯
• 英文名称: acetic acid decahydro[2]naphthyl ester
• 英文别名: Essigsaeure-decahydro[2]naphthylester；(+/-)-2-Decalylacetat；2-Acetoxy-decalin；Decahydro-2-naphthyl acetate；1,2,3,4,4a,5,6,7,8,8a-decahydronaphthalen-2-yl acetate
• CAS: 10519-11-6
• 化学式: C₁₂H₂₀O₂
• mdl: MFCD00021657
• 分子量: 196.29
• InChiKey: XKCLIPLFEJSOAT-UHFFFAOYSA-N

物化性质

• 沸点：
  293.19°C (rough estimate)
• 密度：
  0.9793 (rough estimate)
• 溶解度：
  Almost insoluble in water, soluble in alcohol and oils.
• LogP：
  4.45 at 22.7℃

计算性质

• 辛醇/水分配系数(LogP)：
  3.5
• 重原子数：
  14
• 可旋转键数：
  2
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.916
• 拓扑面积：
  26.3
• 氢给体数：
  0
• 氢受体数：
  2

SDS

---

Section 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product identifiers
Product name : DECAHYDRO-2-NAPHTHYL ACETATE
CAS-No. : 10519-11-6
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

Section 2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Label elements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the
aquatic environment.
S-phrase(s)
S61 Avoid release to the environment. Refer to special instructions/ Safety
data sheets.
Other hazards - none

---

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Formula : C12H20O2
Molecular Weight : 196,29 g/mol
Component Concentration
DECAHYDRO-2-NAPHTHYL ACETATE
CAS-No. 10519-11-6 -

---

Section 4. FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Indication of any immediate medical attention and special treatment needed
no data available

---

Section 5. FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

Section 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure adequate ventilation.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the
environment must be avoided.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

Section 7. HANDLING AND STORAGE
Precautions for safe handling
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
protection.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Specific end uses
no data available

---

Section 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work-place., The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired,
use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU).

---

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing no data available
point
f) Initial boiling point and no data available
boiling range
g) Flash point no data available
h) Evaporation rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density no data available
n) Water solubility no data available
o) Partition coefficient: n- log Pow: 3,648
octanol/water
p) Autoignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

Section 10. STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available

---

Section 11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation May be harmful if inhaled. May cause respiratory tract irritation.
Ingestion
May be harmful if swallowed.
Skin May be harmful if absorbed through skin. May cause skin irritation.
Eyes May cause eye irritation.
Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Additional Information
RTECS: QL3447000

---

Section 12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
Toxic to aquatic life.
no data available

---

Section 13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
professional waste disposal service to dispose of this material. Dissolve or mix the material with a
combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

Section 14. TRANSPORT INFORMATION
UN number
ADR/RID: 3077 IMDG: 3077 IATA: 3077
UN proper shipping name
ADR/RID: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (DECAHYDRO-2-
NAPHTHYL ACETATE)
IMDG: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. (DECAHYDRO-2-
NAPHTHYL ACETATE)
IATA: Environmentally hazardous substance, solid, n.o.s. (DECAHYDRO-2-NAPHTHYL ACETATE)
Transport hazard class(es)
ADR/RID: 9 IMDG: 9 IATA: 9
Packaging group
ADR/RID: III IMDG: III IATA: III
Environmental hazards
ADR/RID: yes IMDG Marine pollutant: yes IATA: yes
Special precautions for user
Further information
EHS-Mark required (ADR 2.2.9.1.10, IMDG code 2.10.3) for single packagings and combination
packagings containing inner packagings with Dangerous Goods > 5L for liquids or > 5kg for solids.

---

Section 15. REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available

---

Section 16. OTHER INFORMATION
Further information
Copyright 2012 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

制备方法与用途

制备方法

萘酚在醋酸醇溶液中以铑、氧化铝催化氢化，然后用醋酐酯化得到产物。

合成制备方法

同样地，萘酚在醋酸醇溶液中以铑、氧化铝催化氢化，随后通过醋酐酯化得到所需产物。

用途简介与用途

该物质可用来调制一般皂用及化妆品用μA香精。

反应信息

• 作为反应物：
  描述：

  十氢2-萘酚乙酸酯 、 furan-2,3,5(4H)-trione pyridine (1:1) 生成 decahydro-naphthalen-2-ol
  参考文献：
  名称：

  Hueckel, Justus Liebigs Annalen der Chemie, 1927, vol. 451, p. 129,130

  摘要：

  DOI：
• 作为产物：
  描述：

  2-萘酚 在 镍 作用下， 生成 十氢2-萘酚乙酸酯
  参考文献：
  名称：

  Leroux, Comptes Rendus Hebdomadaires des Seances de l'Academie des Sciences, 1905, vol. 140, p. 590

  摘要：

  DOI：

文献信息

• [EN] ESTERS AND ETHERS OF 2,2,4,4-TETRAMETHYLCYCLOBUTANE-1,3-DIOL FOR USE AS AROMA CHEMICALS<br/>[FR] ESTERS ET ÉTHERS DE 2,2,4,4-TÉTRAMÉTHYLCYCLOBUTANE -1,3-DIOL DESTINÉS À ÊTRE UTILISÉS EN TANT QUE PRODUITS CHIMIQUES AROMATIQUES
  申请人：BASF SE

  公开号：WO2019048544A1

  公开（公告）日：2019-03-14

  The present invention relates to the use of a compound of the general formula (I) wherein R1 is C1-C4-alkyl or -(C=0)-R3, R2 is hydrogen, C1-C4-alkyl or -(C=0)-R4, and R3 and R4, independently of one another, are selected from the group consisting of hydrogen and C1-C4-alkyl, a stereoisomer thereof or a mixture of stereoisomers thereof, as an aroma chemical, to aroma chemical compositions comprising at least one compound of the general formula (I), a stereoisomer thereof or a mixture of stereoisomers thereof, and to a method for preparing a fragranced ready-to-use composition, which comprises incorporating at least one compound of the general formula (I), a stereoisomer thereof or a mixture of stereoisomers thereof, into a ready- to-use composition. The present invention further relates to specific ethers and specific esters of the compounds of the general formula (I) and a method for their preparation.

  本发明涉及使用一般式(I)的化合物，其中R1是C1-C4-烷基或-(C=0)-R3，R2是氢、C1-C4-烷基或-(C=0)-R4，R3和R4彼此独立地选自氢和C1-C4-烷基的群，其立体异构体或其立体异构体混合物，作为香料化学品，以及包含至少一种一般式(I)的化合物、其立体异构体或其立体异构体混合物的香料化学品组合物，以及制备香味即用组合物的方法，该方法包括将至少一种一般式(I)的化合物、其立体异构体或其立体异构体混合物纳入即用组合物中。本发明还涉及一般式(I)化合物的特定醚和特定酯以及它们的制备方法。
• DERIVATIVES OF 1-(4-METHYLCYCLOHEXYL)-ETHANOLS
  申请人：Symrise AG

  公开号：US20170002294A1

  公开（公告）日：2017-01-05

  The invention relates to mixtures having: components (a) having at least one fragrance of the formula (I) where R1=OC-R2, CH 2 OR3, C1-C8 open-chain or branched aliphatic radical, optionally substituted and/or unsaturated, with R2=an open-chain or branched aliphatic radical, optionally substituted and/or unsaturated, having 2-10 C atoms, with R3=an open-chain or branched aliphatic radical, optionally substituted and/or unsaturated, having 1-8 C atoms, and components (b) having at least one fragrance, different from the fragrances of component a, characterized in that the weight ratio of all components (a) to all components (b) is from 1:10 to 1:10000.

  该发明涉及具有以下特征的混合物：组分(a)至少具有一个符合以下式(I)的香料，其中R1=OC-R2，CH2OR3，C1-C8开链或支链脂肪基，可选择地取代和/或不饱和，其中R2=一个开链或支链脂肪基，可选择地取代和/或不饱和，含有2-10个碳原子，其中R3=一个开链或支链脂肪基，可选择地取代和/或不饱和，含有1-8个碳原子，以及组分(b)至少具有一个与组分a的香料不同的香料，其特征在于所有组分(a)与所有组分(b)的重量比为1:10至1:10000。
• [EN] HIGH-COVERAGE, LOW ODOR MALODOR COUNTERACTANT COMPOUNDS AND METHODS OF USE<br/>[FR] COMPOSÉS AGISSANT CONTRE LES MAUVAISES ODEURS, À FAIBLE ODEUR ET À POUVOIR COUVRANT ÉLEVÉ, ET PROCÉDÉS D'UTILISATION
  申请人：INT FLAVORS & FRAGRANCES INC

  公开号：WO2016049523A1

  公开（公告）日：2016-03-31

  The present invention relates to novel compounds and their use as malodor counteractant materials.

  本发明涉及新化合物及其作为恶臭对抗剂材料的用途。
• Ambergris and/or indole-like compositions of odoriferous substances
  申请人：SYMRISE AG

  公开号：US10920169B2

  公开（公告）日：2021-02-16

  The present invention primarily relates to the use of one or more compound(s) of formula (I) as fragrance, wherein R is methyl or ethyl and R1 is H, methyl or ethyl. The invention further relates to new fragrance compositions comprising one or more compound(s) of formula (I), as described herein, the use of said fragrance compositions, perfumed articles comprising said fragrance compositions, and various methods of perfuming said articles or for imparting, modifying and/or enhancing certain olfactory notes.

  本发明主要涉及将一个或多个式(I)化合物作为香精使用，其中R为甲基或乙基，R1为H、甲基或乙基。该发明还涉及包含一个或多个式(I)化合物的新香精组合物，所述组合物的使用，包含所述香精组合物的香水制品，以及用于给制品添加、改变和/或增强某些嗅觉音符的各种香水方法。
• [EN] SUBSTITUTED 4-METHYLENE-TETRAHYDROPYRANS, 4-METHYL-DIHYDROPYRANS AND 4-METHYL-TETRAHYDROPYRANS AND USE THEREOF AS AROMA CHEMICALS<br/>[FR] 4-MÉTHYLÈNE-TÉTRAHYDROPYRANES, 4-MÉTHYL-DIHYDROPYRANES ET 4-MÉTHYL-TÉTRAHYDROPYRANES SUBSTITUÉS ET UTILISATION CORRESPONDANTE EN TANT QUE PRODUITS CHIMIQUES AROMATIQUES
  申请人：BASF SE

  公开号：WO2021122558A1

  公开（公告）日：2021-06-24

  The present invention relates to substituted 4-methylene-tetrahydropyrans, 4-methyl- dihydropyrans and 4-methyl-tetrahydropyrans of formula (I), where the variables are as defined in the claims and description, to a stereoisomer thereof, to a mixture of stereoisomers thereof, to a mixture of different di- and tetrahydropyrans (I) and to a mixture containing at least one di- or tetrahydropyran (I) and at least one cyclic acetal which is a 1,3-dioxan carrying in 2-position an isobutanol-2-yl- (derived) substituent and in 4,4- or 5,5-position two methyl substituents. The invention also relates to the use of such compounds as an aroma chemical and/or for modifying and/or enhancing the aroma of a composition, to compositions comprising such compounds, to methods for preparing such compounds and to a product obtainable by these methods.

  本发明涉及式(I)的取代4-亚甲基-四氢吡喃、4-甲基-二氢吡喃和4-甲基-四氢吡喃，其中变量如权利要求和描述中所定义的那样，以及其立体异构体、其立体异构体的混合物、不同二氢吡喃和四氢吡喃(I)的混合物，以及至少含有一种二氢吡喃(I)和至少含有一种环状缩醛的混合物，该环状缩醛是一种1,3-二氧杂环戊二烷，其2-位置携带异丁醇-2-基（衍生）取代基，在4,4-或5,5-位置携带两个甲基取代基。该发明还涉及将这些化合物用作香气化学品和/或用于修改和/或增强组合物的香气，包括这些化合物的组合物，制备这些化合物的方法以及通过这些方法得到的产品。