摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

十七氟壬酰氯 | 52447-23-1

中文名称
十七氟壬酰氯
中文别名
全氟壬酰氯
英文名称
perfluorononanoyl chloride
英文别名
2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,9-heptadecafluorononanoyl chloride
十七氟壬酰氯化学式
CAS
52447-23-1
化学式
C9ClF17O
mdl
——
分子量
482.524
InChiKey
MPWXHQITWLFMQM-UHFFFAOYSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

物化性质

  • 沸点:
    69 °C

计算性质

  • 辛醇/水分配系数(LogP):
    6.6
  • 重原子数:
    28
  • 可旋转键数:
    7
  • 环数:
    0.0
  • sp3杂化的碳原子比例:
    0.89
  • 拓扑面积:
    17.1
  • 氢给体数:
    0
  • 氢受体数:
    18

安全信息

  • 危险等级:
    CORROSIVE
  • 危险品标志:
    Xn,C
  • 安全说明:
    S26
  • 危险类别码:
    R22,R36/37/38
  • WGK Germany:
    3
  • 海关编码:
    2915900090
  • 危险品运输编号:
    UN 2810 6.1/PG 3
  • 储存条件:
    室温

SDS

SDS:053a3e0cd34253b994aa4c15306874de
查看

Section 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product identifiers
Product name : Heptadecafluorononanoyl chloride
CAS-No. : 52447-23-1
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances



Section 2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Acute toxicity, Oral (Category 3)
Skin irritation (Category 2)
Eye irritation (Category 2)
Specific target organ toxicity - single exposure (Category 3)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Harmful if swallowed. Irritating to eyes, respiratory system and skin.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word Danger
Hazard statement(s)
H301 Toxic if swallowed.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Precautionary statement(s)
P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/
physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazard none
Statements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R22 Harmful if swallowed.
R36/37/38 Irritating to eyes, respiratory system and skin.
S-phrase(s)
S26 In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
Caution - substance not yet tested completely.
Other hazards - none

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Synonyms : Perfluorononanoyl chloride
Formula : C9ClF17O
Molecular Weight : 482,52 g/mol
Component Concentration
Heptadecafluorononanoyl chloride
CAS-No. 52447-23-1 -

Section 4. FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
Indication of any immediate medical attention and special treatment needed
no data available

Section 5. FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, Hydrogen chloride gas, Hydrogen fluoride
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

Section 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Wear respiratory protection. Avoid breathing vapors, mist or gas. Ensure adequate ventilation. Evacuate
personnel to safe areas.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

Section 7. HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Normal measures for preventive fire protection.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Specific end uses
no data available

Section 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling
the product.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup
to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a) Appearance Form: clear, liquid
Colour: colourless
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing no data available
point
f) Initial boiling point and no data available
boiling range
g) Flash point no data available
h) Evaporation rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density no data available
n) Water solubility no data available
o) Partition coefficient: n- no data available
octanol/water
p) Autoignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

Section 10. STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available

Section 11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
Inhalation - May cause respiratory irritation.
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation May be harmful if inhaled. Causes respiratory tract irritation.
Ingestion Toxic if swallowed.
Skin May be harmful if absorbed through skin. Causes skin irritation.
Eyes Causes serious eye irritation.
Additional Information
RTECS: Not available

Section 12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available

Section 13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
professional waste disposal service to dispose of this material.
Contaminated packaging
Dispose of as unused product.

Section 14. TRANSPORT INFORMATION
UN number
ADR/RID: 2810 IMDG: 2810 IATA: 2810
UN proper shipping name
ADR/RID: TOXIC LIQUID, ORGANIC, N.O.S. (Heptadecafluorononanoyl chloride)
IMDG: TOXIC LIQUID, ORGANIC, N.O.S. (Heptadecafluorononanoyl chloride)
IATA: Toxic liquid, organic, n.o.s. (Heptadecafluorononanoyl chloride)
Transport hazard class(es)
ADR/RID: 6.1 IMDG: 6.1 IATA: 6.1
Packaging group
ADR/RID: III IMDG: III IATA: III
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
no data available

Section 15. REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available

Section 16. OTHER INFORMATION
Further information
Copyright 2012 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

上下游信息

  • 上游原料
    中文名称 英文名称 CAS号 化学式 分子量
    全氟壬酸 perfluorononanoic acid 375-95-1 C9HF17O2 464.079
  • 下游产品
    中文名称 英文名称 CAS号 化学式 分子量
    全氟壬酸甲酯 methyl perfluorononanoate 51502-45-5 C10H3F17O2 478.105

反应信息

点击查看最新优质反应信息

文献信息

  • Dissociation of Carbanions from Acyl Iridium Compounds:  An Experimental and Computational Investigation
    作者:Joseph G. Cordaro、Robert G. Bergman
    DOI:10.1021/ja045859l
    日期:2004.12.1
    of CF(3)(-) to act as a leaving group came from the investigation of the analogous methyl and chloride derivatives Cp(PMe(3))Ir(Me)[C(O)CF(3)] and Cp(PMe(3))Ir(Cl)[C(O)CF(3)]. Both of these compounds undergo a similar loss of trifluoromethyl anion, generating an iridium carbonyl cation and CF(3)D in CD(3)OD. Three additional acyl hydrides, Cp(PMe(3))Ir(H)[C(O)R(F)] (where R(F) = CF(2)CF(3), CF(2)CF(2)CF(3)
    加热 Cp(PMe(3))Ir(H)[C(O)CF(3)] (1) 代替醛的还原消除或脱羰得到三氟烷基氢化物,导致 Cp(PMe(3) [C(O)CF(3)] (1) 的定量形成3))Ir(CO) (2) 和 CF(3)H。动力学实验、同位素标记研究、溶剂效应研究和包含溶剂的 DFT 计算支持一种机制,该机制涉及三氟甲基阴离子的初始解离以产生瞬态离子对中间体 [Cp(PMe(3))Ir(H)(CO) ](+)[CF(3)](-)。CF(3)(-) 作为离去基团的能力的进一步证据来自对类似甲基和氯衍生物 Cp(PMe(3))Ir(Me)[C(O)CF(3) 的研究] 和 Cp(PMe(3))Ir(Cl)[C(O)CF(3)]。这两种化合物都经历了类似的三氟甲基阴离子丢失,在 CD(3)OD 中产生了羰基铱和 CF(3)D。三个额外的酰基氢化物,
  • Scavenger assisted combinatorial process for preparing libraries of amides, carbamates and sulfonamides
    申请人:ELI LILLY AND COMPANY
    公开号:EP0825164A2
    公开(公告)日:1998-02-25
    This invention relates to a novel solution phase process for the preparation of amide, carbamate, and sulfonamide combinatorial libraries. These libraries have utility for drug discovery and are used to form wellplate components of novel assay kits.
    这项发明涉及一种用于制备酰胺、碳酸酯和磺酰胺组合库的新型溶液相过程。这些库在药物发现中具有实用价值,并用于形成新型检测套件的微孔板组件。
  • Acylation of 2-methoxypropene with anhydrides and halides of perfluorocarboxylic acids in the presence of tertiary amines
    作者:D. V. Gorlov、M. A. Kurykin、O. E. Petrova
    DOI:10.1007/bf02494832
    日期:1999.9
    Abstract3-Methoxy-1-(perfluoroalkyl)but-2-en-1-ones were synthesized byC-acylation of 2-methoxypropene with perfluorocarboxylic acid anhydrides, acid chlorides, and acid fluorides in the presence of tertiary amines.
    摘要 3-甲氧基-1-(全氟烷基)丁-2-烯-1-酮是通过2-甲氧基丙烯与全氟羧酸酐、酰氯和酰氟在叔胺存在下的C-酰化反应合成的。
  • Synthesis and Antibody Binding of Highly Fluorinated Amphiphilic MUC1 Glycopeptide Antigens
    作者:Tobias Platen、Timo Schüler、Wolfgang Tremel、Anja Hoffmann-Röder
    DOI:10.1002/ejoc.201100648
    日期:2011.7
    The analysis of humoral immune responses is of great importance for basic and clinical research. Mapping the structural requirements of epitope recognition with modified tumor-associated carbohydrate antigens allows both the development of biomarkers and the design of synthetic anticancer vaccines. For this purpose, double-tailed hydrocarbon/fluorocarbon membrane anchors have been prepared and conjugated
    体液免疫反应的分析对于基础和临床研究具有重要意义。用修饰的肿瘤相关碳水化合物抗原绘制表位识别的结构要求,既可以开发生物标志物,也可以设计合成抗癌疫苗。为此,双尾碳氢化合物/碳氟化合物膜锚已被制备并与 TN 二肽结合。此外,一种新型疏水化 MUC1 串联重复糖肽抗原完全组装在固体支持物上,并通过 ELISA、QCM 和 SPR 测量证明了其与不同小鼠抗 MUC1 抗体的特异性结合。这种功能性含氟 MUC1 抗原对特定聚糖(微)阵列格式非常感兴趣,并允许对从免疫研究中获得的血清抗体进行详细分析。
  • Fluorous-tethered amine bases for organic and parallel synthesis: scope and limitations
    作者:Craig W Lindsley、Zhijian Zhao、William H Leister、Kimberly A Strauss
    DOI:10.1016/s0040-4039(02)01399-0
    日期:2002.9
    The synthesis of fluorous-tethered amine bases is described. These novel fluorous-tethered reagents promote reactions, remove acidic by-products, and scavenge electrophiles. They are readily separated from the reaction mixture by solid phase extraction on a novel mixed sorbent SPE (SCX/fluorous silica gel) delivering products in high yields and purities.
    描述了氟拴胺基碱的合成。这些新型的氟系试剂可促进反应,除去酸性副产物并清除亲电试剂。通过在新型混合吸附剂SPE(SCX /氟硅胶)上进行固相萃取,可以很容易地将它们从反应混合物中分离出来,从而以高收率和高纯度输送产品。
查看更多