sodium 2-acrylamido-2-methylpropane-1-sulfonate | 5165-97-9

• 物质功能分类: 有机原料 - 有机金属类化合物 - 有机钠
• 分子结构分类: 有机化合物 - 有机酸及其衍生物 - 有机磺酸及其衍生物
• 英文名称: sodium 2-acrylamido-2-methylpropane-1-sulfonate
• 英文别名: sodium 2-acrylamido-2-methylpropanesulfonate；2-acrylamido-2-methyl-1-propanesulfonic acid sodium salt；2-acrylamido-2-methylpropanesulfonic acid sodium salt；sodium 2-acryloylamino-2-methyl-propane-1-sulfonate；AMPS；sodium salt of 2-methyl-2-[(1-oxo-2-propenyl)amino]-1-propanesulphonic acid；sodium;N-(2-methyl-1-sulfonatopropan-2-yl)prop-2-enamide
• CAS: 5165-97-9
• 化学式: C₇H₁₂NO₄S*Na
• 分子量: 229.232
• InChiKey: FWFUWXVFYKCSQA-UHFFFAOYSA-M

物化性质

• 沸点：
  110℃ at 101.325kPa
• 密度：
  1.2055 g/mL at 25 °C(lit.)
• LogP：
  -4.34
• 物理描述：
  Liquid

计算性质

• 辛醇/水分配系数(LogP)：
  -3.38
• 重原子数：
  14
• 可旋转键数：
  4
• 环数：
  0.0
• sp3杂化的碳原子比例：
  0.57
• 拓扑面积：
  94.7
• 氢给体数：
  1
• 氢受体数：
  4

安全信息

• TSCA：
  Yes
• 安全说明：
  S26
• 危险类别码：
  R36/37/38
• WGK Germany：
  3
• 海关编码：
  2924199090
• 储存条件：
  室温

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : 2-Acrylamido-2-methyl-1-propanesulfonic acid
sodium salt solution
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
Not a hazardous substance or mixture according to EC-directives 67/548/EEC or 1999/45/EC.
Label elements
The product does not need to be labelled in accordance with EC directives or respective national laws.
Other hazards - none

---

SECTION 3: Composition/information on ingredients
Substances
Formula : C7H12NNaO4S
Molecular Weight : 229,23 g/mol
No components need to be disclosed according to the applicable regulations.

---

SECTION 4: First aid measures
Description of first aid measures
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
In case of skin contact
Wash off with soap and plenty of water.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, nitrogen oxides (NOx), Sulphur oxides, Sodium oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Avoid breathing vapours, mist or gas.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Keep in suitable, closed containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Specific end use(s)
A part from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
General industrial hygiene practice.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection not required. For nuisance exposures use type OV/AG (US) or type ABEK
(EU EN 14387) respirator cartridges. Use respirators and components tested and approved under
appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: liquid
b) Odour no data available
c) Odour Threshold no data available
d) pH 9
e) Melting point/freezing no data available
point
f) Initial boiling point and no data available
boiling range
g) Flash point not applicable
h) Evapouration rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density 1,2055 g/mL at 25 °C
n) Water solubility no data available
o) Partition coefficient: n- no data available
octanol/water
p) Auto-ignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

---

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
no data available

---

---

SECTION 15 - REGULATORY INFORMATION
N/A

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  sodium 2-acrylamido-2-methylpropane-1-sulfonate 在 sodium carbonate 作用下， 以 水 为溶剂， 45.0~117.0 ℃ 、533.29 Pa 条件下， 反应 6.0h， 生成
  参考文献：
  名称：

  US2014/339462

  摘要：

  公开号：
• 作为产物：
  描述：

  2-丙烯酰胺基-2-甲基丙磺酸 在 sodium hydroxide 作用下， 以 水 为溶剂， 反应 2.0h， 生成 sodium 2-acrylamido-2-methylpropane-1-sulfonate
  参考文献：
  名称：

  HYDRATED CRYSTALLINE FORM OF 2-ACRYLAMIDO-2-METHYLPROPANE SULFONIC ACID

  摘要：

  本发明涉及一种2-丙烯酰胺-2-甲基丙磺酸的水合晶体形式，其2-theta粉末X射线衍射图包含在10.58°、11.2°、12.65°、13.66°、16.28°、18.45°、20°、20.4°、22.5°、25.5°、25.88°、26.47°、28.52°、30.28°、30.8°、34.09°、38.19°、40.69°、41.82°、43.74°、46.04°度（±0.1°）处的峰。本发明还涉及这种形式的2-丙烯酰胺-2-甲基丙磺酸的生产方法，以及这种形式的2-丙烯酰胺-2-甲基丙磺酸盐的水溶液A的制备方法，以及这种形式的-丙烯酰胺-2-甲基丙磺酸的（共）聚合物。

  公开号：

  US20200031765A1

文献信息

• Polymeric boronic acid derivatives as lipase inhibitors
  申请人：Huval Cori Chad

  公开号：US20060134062A1

  公开（公告）日：2006-06-22

  Human obesity is a health problem affecting a significant proportion of the American population. Numerous methods of treating obesity have been developed, but all have serious drawbacks. The present invention discloses a novel class of polymers with either a sulfur atom or an electron withdrawing group between a polymer backbone and a pendant aryl boronic acid group. Polymers having such an electron withdrawing group have been found to be particularly effective in inhibiting lipase in vitro and in vivo. Methods of treating obesity and reducing absorption of fat are also disclosed.

  人类肥胖是影响美国人口相当大比例的健康问题。已经开发了许多治疗肥胖的方法，但都存在严重缺陷。本发明揭示了一种新型聚合物类别，其在聚合物主链和挂链芳基硼酸基团之间具有硫原子或电子吸引基团。发现具有这种电子吸引基团的聚合物在体外和体内抑制脂肪酶特别有效。还公开了治疗肥胖和减少脂肪吸收��方法。
• [EN] PARTICLES FOR ELECTROPHORETIC DISPLAYS<br/>[FR] PARTICULES POUR ÉCRANS D'AFFICHAGE ÉLECTROPHORÉTIQUES
  申请人：MERCK PATENT GMBH

  公开号：WO2012019704A1

  公开（公告）日：2012-02-16

  This invention relates to coloured polymer particles preferably with surface functionality for charge retention, a process for their preparation, the use of these particles for the preparation of an electrophoretic device, colour electrophoretic displays comprising such particle, and new polymerisable dyes.

  这项发明涉及彩色聚合物颗粒，最好具有表面功能以保持电荷，一种它们的制备方法，利用这些颗粒制备电泳装置，包括这种颗粒的彩色电泳显示器，以及新的可聚合染料。
• [EN] COLORANT MULTIMER, COLORED CURABLE COMPOSITION, COLOR FILTER AND METHOD FOR PRODUCING THE SAME, AND SOLID-STATE IMAGE SENSOR, IMAGE DISPLAY DEVICE, LIQUID CRYSTAL DISPLAY DEVICE AND ORGANIC EL DISPLAY WITH THE COLOR FILTER<br/>[FR] MULTIMÈRE COLORANT, COMPOSITION DURCISSABLE COLORÉE, FILTRE COLORÉ ET PROCÉDÉ DE FABRICATION DE CEUX-CI, ET DÉTECTEUR D'IMAGES À L'ÉTAT SOLIDE, DISPOSITIF D'AFFICHAGE D'IMAGES, DISPOSITIF D'AFFICHAGE À CRISTAUX LIQUIDES ET DISPOSITIF D'AFFICHAGE ÉLEC
  申请人：FUJIFILM CORP

  公开号：WO2011040628A1

  公开（公告）日：2011-04-07

  A colorant multimer includes, as a partial structure of a colorant moiety, a dipyrromethene metal complex compound or tautomer thereof obtained from: (i) a dipyrromethene compound represented by the following Formula (M); and (ii) a metal or a metal compound: wherein in Formula (M), R4, R5, R6, R7, R8, R9, and R10 each independently represent a hydrogen atom or a monovalent substituent.

  一种着色剂多聚体包括作为着色剂部分结构的二吡咯甲烷金属配合物化合物或其互变异构体，所述化合物由以下公式（M）表示的二吡咯甲烷化合物和金属或金属化合物得到：其中在公式（M）中，R4、R5、R6、R7、R8、R9和R10分别独立地表示氢原子或一价取代基。
• Inverse latex of anionic polyelectrolytes in silicone oils; cosmetic use thereof
  申请人：SOCIETE D'EXPLOITATION DE PRODUITS POUR LES INDUSTRIES CHIMIQUES, S.E.P.P.I.C.

  公开号：EP1932515A1

  公开（公告）日：2008-06-18

  Composition comprising an oil phase, an aqueous phase, at least one emulsifying system of water-in-oil (W/O) type, optionally at least one emulsifying system of oil-in-water (O/W) type, in the form of an inverse latex comprising from 10% to 80% by mass and preferably from 20% to 70% by mass and most preferably from 30% to 60% by mass, of a linear partially or totally salified anionic polyelectrolyte, with wherein in that said oil phase comprises a silicone oil or a mixture of silicone oils; its use to thicken and or to emulsify cosmetic, dermopharmaceutical or pharmaceutical compositions.

  包括油相、水相、至少一种水包油（W/O）型乳化系统、可选地至少一种油包水（O/W）型乳化系统的组合物，以反向乳胶的形式，包括质量百分含量为10%至80%，优选为20%至70%，最优选为30%至60%的线性部分或完全盐化的阴离子聚电解质；其中所述油相包括硅油或硅油混合物；其用途是用于增稠和/或乳化化妆品、皮肤药物或药用组合物。
• Novel inverse latices of copolymers of AMPS and of N,N-dimethylacrylamide; cosmetic use
  申请人：Braun Olivier

  公开号：US20060269490A1

  公开（公告）日：2006-11-30

  Composition including an oil phase, an aqueous phase, at least one emulsifying system of water-in-oil (W/O) type, optionally at least one emulsifying system of oil-in-water (O/W) type, in the form of an inverse latex including from 20% to 70% by mass and preferably from 25% to 50% by mass of a branched or crosslinked polyelectrolyte, characterized in that the polyelectrolyte is a copolymer of 2-acrylamido-2-methylpropanesulfonic acid partially or totally salified with N,N-dimethylacrylamide and optionally one or more monomers chosen from monomers containing a partially or totally salified weak acid function and neutral monomers. Cosmetic use.

  包括油相、水相、至少一种水包油（W/O）型乳化系统、可选地至少一种油包水（O/W）型乳化系统的组合物，呈逆乳胶形式，包括质量百分含量为20%至70%，优选为25%至50%的支化或交联聚电解质，其特征在于聚电解质是2-丙烯酰胺基-2-甲基丙烯磺酸与N,N-二甲基丙烯酰胺部分或完全盐化的共聚物，可选地还包括从含部分或完全盐化弱酸功能的单体和中性单体中选择的一个或多个单体。用于化妆品。