摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

(2-甲基-4-苯基戊烷-2-基)苯 | 31516-55-9

中文名称
(2-甲基-4-苯基戊烷-2-基)苯
中文别名
——
英文名称
2-Methyl-2,4-diphenyl-pentan
英文别名
2,4-diphenyl-2-methylpentane;Benzene, 1,1'-(1,1,3-trimethyl-1,3-propanediyl)bis-;(2-methyl-4-phenylpentan-2-yl)benzene
(2-甲基-4-苯基戊烷-2-基)苯化学式
CAS
31516-55-9
化学式
C18H22
mdl
——
分子量
238.373
InChiKey
QZPNCZQSSRONDB-UHFFFAOYSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

物化性质

  • 沸点:
    169 °C(Press: 13 Torr)
  • 密度:
    0.951±0.06 g/cm3(Predicted)

计算性质

  • 辛醇/水分配系数(LogP):
    5.9
  • 重原子数:
    18
  • 可旋转键数:
    4
  • 环数:
    2.0
  • sp3杂化的碳原子比例:
    0.33
  • 拓扑面积:
    0
  • 氢给体数:
    0
  • 氢受体数:
    0

安全信息

  • 海关编码:
    2902909090

SDS

SDS:c689d249555b2a564c7007316e6f8284
查看

上下游信息

  • 上游原料
    中文名称 英文名称 CAS号 化学式 分子量
  • 下游产品
    中文名称 英文名称 CAS号 化学式 分子量

反应信息

  • 作为反应物:
    描述:
    噻吩(2-甲基-4-苯基戊烷-2-基)苯 、 alkaline earth salt of/the/ methylsulfuric acid 350.0 ℃ 、6.86 MPa 条件下, 生成 (1,1-二甲基丁基)苯
    参考文献:
    名称:
    MODIFIED NICKEL CATALYST FOR THE HYDROGENOLYSIS AND ALKYLATION OF AROMATIC HYDROCARBONS
    摘要:
    DOI:
    10.1021/ja01564a073
  • 作为产物:
    描述:
    2,4-二苯基-4-甲基-1-戊烯 在 Pd/poly(methylphenylsilane)-TiO2 氢气 作用下, 以 四氢呋喃 为溶剂, 反应 8.0h, 生成 (2-甲基-4-苯基戊烷-2-基)苯
    参考文献:
    名称:
    Development of microchannel reactors using polysilane-supported palladium catalytic systems in capillaries
    摘要:
    一种新的方法已被开发,通过使用含有金属氧化物的聚硅烷,在毛细管的通道壁上固定钯催化剂,并已应用于加氢反应。
    DOI:
    10.1039/b715259k
点击查看最新优质反应信息

文献信息

  • Ambient Hydrogenation and Deuteration of Alkenes Using a Nanostructured Ni‐Core–Shell Catalyst
    作者:Jie Gao、Rui Ma、Lu Feng、Yuefeng Liu、Ralf Jackstell、Rajenahally V. Jagadeesh、Matthias Beller
    DOI:10.1002/anie.202105492
    日期:2021.8.16
    selective hydrogenation and deuteration of a variety of alkenes is presented. Key to success for these reactions is the use of a specific nickel-graphitic shell-based core–shell-structured catalyst, which is conveniently prepared by impregnation and subsequent calcination of nickel nitrate on carbon at 450 °C under argon. Applying this nanostructured catalyst, both terminal and internal alkenes, which
    提出了各种烯烃的选择性氢化和氘化的通用方案。这些反应成功的关键是使用特定的镍-石墨壳基核壳结构催化剂,该催化剂可以通过浸渍碳上的硝酸镍并随后在氩气下于 450 °C 下煅烧来方便地制备。应用这种纳米结构催化剂,具有工业和商业重要性的末端烯烃和内部烯烃在环境条件下(室温,使用1巴氢气或1巴氘)进行选择性氢化和氘化,从而获得相应的烷烃和氘。标记烷烃的收率良好至极好。通过克级反应以及高效的催化剂回收实验证明了这种镍基加氢方案的合成效用和实用性。
  • Practical access to the polymer incarcerated platinum (PI Pt) catalyst and its application to hydrogenation
    作者:Yoji Miyazaki、Hiroyuki Hagio、Sh? Kobayashi
    DOI:10.1039/b605288f
    日期:——
    Polymer incarcerated platinum catalysts (PI Pt) were conveniently prepared from PtCl2(COD) or H2PtCl6·6H2O and styrene copolymers via reduction of the Pt sources with triethylamine, coacervation, and cross-linking. The Pt catalysts have been successfully applied to catalytic hydrogenation including saturation of heterocyclic compounds.
    聚合物包封铂催化剂(PI Pt)通过使用三乙胺还原Pt源(PtCl2(COD)或H2PtCl6·6H2O)与苯乙烯共聚物共缩合、交联等步骤制备得到。这些铂催化剂已成功应用于催化加氢反应,包括杂环化合物的饱和反应。
  • Polysilane-supported Pd and Pt nanoparticles as efficient catalysts for organic synthesis
    作者:Hidekazu Oyamada、Ryo Akiyama、Hiroyuki Hagio、Takeshi Naito、Sh? Kobayashi
    DOI:10.1039/b610241g
    日期:——
    Polysilane-supported Pd and Pt catalysts have been prepared for the first time, and used successfully in hydrogenation, Suzuki and Sonogashira reactions, and hydrosilylation respectively: the reactions proceeded in high yields, and the catalysts could be recovered almost quantitatively by simple filtration and reused.
    首次制备了聚硅烷支持的钯和铂催化剂,并在氢化、铃木反应和园田反应以及氢硅烷化反应中成功应用:反应产率高,催化剂可以通过简单过滤几乎定量回收并重复使用。
  • Hydrogenation reactions using scCO2 as a solvent in microchannel reactors
    作者:Juta Kobayashi、Yuichiro Mori、Shū Kobayashi
    DOI:10.1039/b501169h
    日期:——
    We have developed an effective microfluidic system for hydrogenation reactions in scCO2; the reactions proceeded very rapidly (within 1 second), by making the best use of scCO2 and utilizing the large specific interfacial area of the microchannel reactor, and high reaction productivity was attained in each channel.
    通过充分利用 scCO2 和微通道反应器的大比界面面积,反应进行得非常快(1 秒内),并且每个通道都达到了很高的反应生产率。
  • Method of catalytic reaction using micro-reactor
    申请人:Kobayashi Shu
    公开号:US20070161834A1
    公开(公告)日:2007-07-12
    A method of catalytic reaction uses a micro-reactor ( 1 ) with a metal catalyst ( 5 ) or a metal complex catalyst ( 5 ) as a solid phase supported on the inner wall ( 4 c ) of a channel ( 4 ), a solution ( 7 ) dissolving a reactant as a liquid phase and hydrogen ( 9 ) as a gas phase are flown through the channel ( 4 ) in pipe flow state, and the reaction of the solution ( 7 ) and the gas ( 9 ) accelerated by the metal catalyst ( 5 ) or the metal complex catalyst ( 5 ) is conducted by three phase catalytic reaction of solid-liquid-gas phases. The metal catalyst ( 5 ) or the metal complex catalyst ( 5 ) is incorporated in a polymer, and hydrogenation reaction by three phase catalytic reductive reaction of a substance to be reduced can be conducted in short time at good yield. For hydrogenation reaction of unsaturated organics, the rate of reaction and yield are high when palladium catalyst is used, and carbonylation reaction can be conducted if carbon monoxide is used instead of hydrogen.
    一种催化反应方法使用微反应器(1),其中金属催化剂(5)或金属配合物催化剂(5)作为固相支撑在通道(4)的内壁(4c)上,将溶解反应物的溶液(7)作为液相和氢气(9)作为气相通过通道(4)以管流状态流动,通过固液气相三相催化反应加速金属催化剂(5)或金属配合物催化剂(5)催化的溶液(7)和气体(9)的反应。金属催化剂(5)或金属配合物催化剂(5)被纳入聚合物中,可以在短时间内以良好的产率进行三相催化还原反应物的氢化反应。对于不饱和有机物的氢化反应,当使用钯催化剂时,反应速率和产率很高,如果使用一氧化碳代替氢气,则可以进行羰基化反应。
查看更多