三异丙叉丙酮基硼烷 | 7297-95-2

• 物质功能分类: 化学试剂 - 有机试剂 - 硼烷
• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 中文名称: 三异丙叉丙酮基硼烷
• 英文名称: trimesitylborane
• 英文别名: Trimesityl-boran；tris(2,4,6-trimethylphenyl)borane
• CAS: 7297-95-2
• 化学式: C₂₇H₃₃B
• mdl: MFCD00008539
• 分子量: 368.37
• InChiKey: FXFWLXFJBVILBE-UHFFFAOYSA-N

物化性质

• 熔点：
  193-195 °C (lit.)
• 沸点：
  477.6±45.0 °C(Predicted)
• 密度：
  0.98±0.1 g/cm3(Predicted)
• 稳定性/保质期：

  在常温常压下，该物质是稳定的。

计算性质

• 辛醇/水分配系数(LogP)：
  10.11
• 重原子数：
  28
• 可旋转键数：
  3
• 环数：
  3.0
• sp3杂化的碳原子比例：
  0.333
• 拓扑面积：
  0
• 氢给体数：
  0
• 氢受体数：
  0

安全信息

• WGK Germany：
  3
• 安全说明：
  S22,S24,S25
• 储存条件：
  请将药品存放在密闭、阴凉干燥的地方。

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : Trimesitylborane
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No. : 7297-95-2

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Label elements
Other hazards - none

---

SECTION 3: Composition/information on ingredients
Substances
Formula : C27H33B
Molecular Weight : 368,36 g/mol
CAS-No. : 7297-95-2
No components need to be disclosed according to the applicable regulations.

---

SECTION 4: First aid measures
Description of first aid measures
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
In case of skin contact
Wash off with soap and plenty of water.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, Borane/boron oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing vapours, mist or gas.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Sweep up and shovel. Keep in suitable, closed containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
protection.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Recommended storage temperature: 2 - 8 °C
Specific end use(s)
A part from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
General industrial hygiene practice.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work-place., The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired,
use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing Melting point/range: 193 - 195 °C
point
f) Initial boiling point and no data available
boiling range
g) Flash point no data available
h) Evapouration rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density no data available
n) Water solubility no data available
o) Partition coefficient: n- no data available
octanol/water
p) Auto-ignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available

---

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
no data available

---

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  三异丙叉丙酮基硼烷 在 硫酸 、 硝酸 作用下， 反应 2.45h， 以63%的产率得到tris(3,5-dinitromesityl)borane
  参考文献：
  名称：

  Lewis酸性硼烷活化无金属氢的化学反应新模式。

  摘要：

  我们在此探索三（芳基）硼烷路易斯酸是否能够在沮丧的路易斯对（FLP）的概念所描述的通常的路易斯酸/碱化学之外裂解H 2。代替路易斯碱，我们使用化学还原剂生成两个高度受阻的硼烷的稳定自由基阴离子：三（3,5-二硝基甲硅烷基）硼烷和三（甲硅烷基）硼烷。NMR光谱表征揭示了相应的硼烷自由基阴离子激活（裂解）二氢，而EPR光谱表征在计算分析的支持下揭示了沿氢活化途径的中间体。与传统的FLP化学模型（称为杂化裂解途径）相比，这种基于自由基的氧化还原途径涉及H2的均质裂解。

  DOI：

  10.1002/anie.201900861
• 作为产物：
  描述：

  2-溴-1,3,5-三甲基苯 在 正丁基锂 作用下， 以 乙醚 、 正己烷 、 正庚烷 、 甲苯 为溶剂， 反应 74.5h， 生成 三异丙叉丙酮基硼烷
  参考文献：
  名称：

  Lewis酸性硼烷活化无金属氢的化学反应新模式。

  摘要：

  我们在此探索三（芳基）硼烷路易斯酸是否能够在沮丧的路易斯对（FLP）的概念所描述的通常的路易斯酸/碱化学之外裂解H 2。代替路易斯碱，我们使用化学还原剂生成两个高度受阻的硼烷的稳定自由基阴离子：三（3,5-二硝基甲硅烷基）硼烷和三（甲硅烷基）硼烷。NMR光谱表征揭示了相应的硼烷自由基阴离子激活（裂解）二氢，而EPR光谱表征在计算分析的支持下揭示了沿氢活化途径的中间体。与传统的FLP化学模型（称为杂化裂解途径）相比，这种基于自由基的氧化还原途径涉及H2的均质裂解。

  DOI：

  10.1002/anie.201900861
• 作为试剂：
  描述：

  (R)-3-(tert-butyldiphenylsilyloxy)-2-methylpropan-1-ol 在 草酰氯 、 三异丙叉丙酮基硼烷 、 potassium tert-butylate 、 叔丁基锂 、 sodium 、 二异丁基氢化铝 、 二甲基亚砜 作用下， 以 四氢呋喃 、 乙醚 、 正己烷 、 二氯甲烷 为溶剂， 反应 42.17h， 生成 (1S,6S)-(+)-4-[(4R,E)-5-tert-butyldiphenylsilyloxy-4-methyl-2-pentenyloxy]-1,5-dimethyl-6-hydroxy-9-oxo-8-oxabicyclo[4.3.0]non-4(5)-ene
  参考文献：
  名称：

  研究以全合成和确定 (-)-saudin 的绝对构型而告终

  摘要：

  对最终对两种对映体的全合成及其绝对构型分配的研究的完整说明，这是一种降血糖的天然产物。描述了两种方法，第一种通过双环内酯中间体和相关的第二种单环酯进行。前者通过不对称 Diels-Alder 环加成获得，后者通过不对称环化方案获得。两种方法都采用路易斯酸促进的克莱森重排，成功的方法利用双齿螯合来控制关键克莱森重排的面部选择性。

  DOI：

  10.1016/j.tet.2011.09.067

文献信息

• Lewis Acidic Boranes, Lewis Bases, and Equilibrium Constants: A Reliable Scaffold for a Quantitative Lewis Acidity/Basicity Scale
  作者：Robert J. Mayer、Nathalie Hampel、Armin R. Ofial

  DOI：10.1002/chem.202003916

  日期：2021.2.24

  borane/Lewis base combination through the sum of two descriptors, one for Lewis acidity (LAB) and one for Lewis basicity (LBB). The resulting Lewis acidity/basicity scale is independent of fixed reference acids/bases and valid for various types of trivalent boron‐centered Lewis acids. It is demonstrated that the newly developed Lewis acidity/basicity scale is easily extendable through linear relationships with

  基于三芳基硼烷与各种以 O、N、S 和 P 为中心的路易斯碱在二氯甲烷中反应的 90 个实验平衡常数，开发了针对以硼为中心的路易斯酸的定量路易斯酸度/碱度标度。 20℃。使用线性自由能关系 log  K B = LA B + LB B进行分析，可以通过两个描述符（一个用于路易斯酸度 ( LA B )）的总和来计算任何类型的硼烷/路易斯碱组合的平衡常数K B。一个用于路易斯碱度（LB B）。所得的路易斯酸度/碱度标度与固定的参考酸/碱无关，并且对于各种类型的三价硼中心路易斯酸有效。事实证明，新开发的路易斯酸度/碱度标度可以通过与量子化学计算或常见的物理有机描述符和已知热力学数据（Δ H ）的线性关系轻松扩展。此外，该实验平台可用于硼烷催化反应的合理发展。
• 四取代吡咯并[3,2-b]吡咯的衍生物和基于其的有机电致发光器件
  申请人：江南大学

  公开号：CN106588935A

  公开（公告）日：2017-04-26

  本发明提供了一种2、5位取代的1,4‑二(4‑叔丁基苯基)吡咯并[3,2‑b]吡咯的衍生物及其应用，它们具有如下的结构式：式中，R代表缺电子的取代苯基基团。以2、5位取代的1,4‑二(4‑叔丁基苯基)吡咯并[3,2‑b]吡咯的衍生物形成的有机薄膜层作为发光层的有机电致发光器件具有低电压驱动、高效率和长寿命等优点。
• Skeletal rearrangements of arylborane complexes mediated by redox reactions: thermal and photochemical oxidation by metal ions
  作者：John J. Eisch、Jamshed H. Shah、Marek P. Boleslawski

  DOI：10.1016/0022-328x(94)87003-9

  日期：1994.1

  variety of metal salts have been found to undergo reduction by thermal and photochemical interaction with tetraarylborate salts and with neutral alkyl- and aryl-borane complexes. In the cases of Cu2+, Cu+, Ni2+, Co2+, Pd2+, Pt2+, Ag+, Zn2+, Hg2+, Sn2+, Pb2+ and Rh3+ salts, such photochemical reductions with NaBPh4 led to the deposition of the free metal, while a number of binary mixtures of metal salts

  已经发现各种金属盐通过与四芳基硼酸盐以及中性烷基-和芳基-硼烷配合物的热和光化学相互作用而发生还原。在Cu 2 +，Cu +，Ni 2 +，Co 2 +，Pd 2 +，Pt 2 +，Ag +，Zn 2 +，Hg 2 +，Sn 2 +，Pb 2+和Rh 3+盐的情况下，例如用NaBPh 4进行光化学还原在这种光还原作用下，导致了游离金属的沉积，而许多金属盐的二元混合物导致了两种金属（有时是真正的合金）的沉积。在这些减少的过程中，芳基硼酸酯的还原剂后行氧化芳基的偶联以形成联芳基严格帧内离子的（BAR 4 - ）或分子内（的Ar 3B）分别方式。对四芳基硼酸根阴离子本身，四苯基硼酸亚铜和三苯基硼烷-吡啶配合物的光化学的单独研究已提出了能够用作金属离子光还原剂的各种反应性中间体的证据，例如三芳基硼烷自由基阴离子，二芳基硼酸酯（I）阴离子或芳基硼烷，7-硼环环庚二烯阴离子或中性络合物，最后是芳基硼氢