摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

2-异丙基硼酸频那醇酯 | 76347-13-2

中文名称
2-异丙基硼酸频那醇酯
中文别名
2-异丙基硼酸嚬哪醇酯
英文名称
2-isopropyl-4,4,5,5-tetramethyl-1,3,2-dioxaborolane
英文别名
2-isopropylboronic acid pinacol ester;isopropylboronic acid pinacol ester;isopropyl pinacol borate;isopropyl boronic ester;4,4,5,5-tetramethyl-2-propan-2-yl-1,3,2-dioxaborolane
2-异丙基硼酸频那醇酯化学式
CAS
76347-13-2
化学式
C9H19BO2
mdl
MFCD05663856
分子量
170.06
InChiKey
MECCSFDHAVAAAW-UHFFFAOYSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

物化性质

  • 沸点:
    115℃/60mm
  • 密度:
    0.87±0.1 g/cm3(Predicted)

计算性质

  • 辛醇/水分配系数(LogP):
    3.33
  • 重原子数:
    12
  • 可旋转键数:
    1
  • 环数:
    1.0
  • sp3杂化的碳原子比例:
    1.0
  • 拓扑面积:
    18.5
  • 氢给体数:
    0
  • 氢受体数:
    2

安全信息

  • 安全说明:
    S26,S36
  • 危险类别码:
    R36/37/38
  • 海关编码:
    2934999090
  • 危险性防范说明:
    P261,P305+P351+P338
  • 危险性描述:
    H302,H315,H319,H335
  • 储存条件:
    存放于惰性气体中;避免潮湿以防止分解。

SDS

SDS:c370d8219fc0a71175c6dd48764ec051
查看
Material Safety Data Sheet

Section 1. Identification of the substance
2-Isopropylboronic acid, pinacol ester
Product Name:
Synonyms:

Section 2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.
H315: Causes skin irritation
H319: Causes serious eye irritation
H335: May cause respiratory irritation
P261: Avoid breathing dust/fume/gas/mist/vapours/spray
Wear protective gloves/protective clothing/eye protection/face protection
P280:
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present
and easy to do – continue rinsing
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
P405: Store locked up

Section 3. Composition/information on ingredients.
2-Isopropylboronic acid, pinacol ester
Ingredient name:
CAS number: 76347-13-2

Section 4. First aid measures
Immediately wash skin with copious amounts of water for at least 15 minutes while removing
Skin contact:
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact: Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.
Ingestion:

Section 5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

Section 6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution: Wear approved mask/respirator
Hand precaution: Wear suitable gloves/gauntlets
Skin protection: Wear suitable protective clothing
Eye protection: Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

Section 7. Handling and storage
Handling: This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Store in closed vessels, under −20◦C.
Storage:

Section 8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

Section 9. Physical and chemical properties
Not specified
Appearance:
Boiling point: No data
Melting point: No data
Flash point: No data
Density: No data
Molecular formula: C9H19BO2
Molecular weight: 170.1

Section 10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide.

Section 11. Toxicological information
No data.

Section 12. Ecological information
No data.

Section 13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

Section 14. Transportation information
Non-harzardous for air and ground transportation.

Section 15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.


SECTION 16 - ADDITIONAL INFORMATION
N/A

上下游信息

  • 上游原料
    中文名称 英文名称 CAS号 化学式 分子量
  • 下游产品
    中文名称 英文名称 CAS号 化学式 分子量

反应信息

  • 作为反应物:
    描述:
    2-异丙基硼酸频那醇酯 作用下, 以 1,2-二氯乙烷 为溶剂, 反应 2.0h, 生成 2-(2-bromopropan-2-yl)-4,4,5,5-tetramethyl-1,3,2-dioxaborolane
    参考文献:
    名称:
    通过连续自由基加成获得 1,2- 和 1,3-二取代环丁基硼酸酯的模块化方法
    摘要:
    使用环丁基环中固有的应变来抵消与硼酸酯相邻的自由基的稳定作用,可以合成多种 1,2- 和 1,3-二取代的环丁基硼酸酯。
    DOI:
    10.1002/anie.202113333
  • 作为产物:
    描述:
    频那醇硼烷magnesium 作用下, 以 四氢呋喃正戊烷 为溶剂, 反应 6.5h, 生成 2-异丙基硼酸频那醇酯
    参考文献:
    名称:
    Preparation and reactions of 4-iodobutyl pinacolborate. Synthesis of substituted alkyl and aryl pinacolboronates via 4-iodobutyl pinacolborate utilizing tetrahydrofuran as the leaving group
    摘要:
    Iodine reacts with 4,4,5,5-tetramethyl-1,3,2-dioxaborolane (HBpin), under ambient reaction conditions in THF, to form the iodoalkylborate species 2-(4-iodobutoxy)-4,4,5,5-tetramethyl-1,3,2-dioxaborolane (4-IboxBpin). Apparently, one-half equivalent of 12 reacts with HBpin to form IBpin in pentanes, which in turn cleaves THF to form the 4-IboxBpin. Alkyl and aryl Grignard reagents, prepared under Barbier conditions, then react with 4-IboxBpin to form the corresponding alkyl and aryl pinacolboronates while reforming and liberating THF as the leaving group. Published by Elsevier Ltd.
    DOI:
    10.1016/j.tetlet.2014.12.033
  • 作为试剂:
    描述:
    参考文献:
    名称:
    多烯环化级联反应的演化,用于合成(-)-环十二烷海绵酯
    摘要:
    我们报告了一个完整的发展为四环甲氧萜(-)-cyclosmenospongine的全合成独特的阳离子多烯环化的完整说明。高度收敛的三组分偶联策略使得能够快速访问经过测试其反应性的各个环化前体。成功的转换生成了三个环,并在一次操作中以高效的方式设置了四个连续的立体中心,从而仅给出了十萘烷的反式构架。此外,我们发现烯醇醚的几何形状以及C3和C8的相对构型对于多烯环化的成功至关重要。
    DOI:
    10.1002/chem.201605029
点击查看最新优质反应信息

文献信息

  • 반방향족성 화합물 및 이를 포함하는 유기 발광 소자
    申请人:Samsung Display Co., Ltd. 삼성디스플레이 주식회사(120120164552) Corp. No ▼ 134511-0187812
    公开号:KR20150142709A
    公开(公告)日:2015-12-23
    반방향족성 화합물 및 이를 포함한 유기 발광 소자가 개시된다.
    含有反向共轭结构的化合物和有机发光器件被提出。
  • Improved method for the conversion of pinacolboronic esters into trifluoroborate salts: facile synthesis of chiral secondary and tertiary trifluoroborates
    作者:Viktor Bagutski、Abel Ros、Varinder K. Aggarwal
    DOI:10.1016/j.tet.2009.10.002
    日期:2009.11
    A general method for the preparation of virtually any potassium trifluoroborate salt from the corresponding pinacolboronic ester is reported. Thus, conditions for an azeotropic removal of pinacol from the reaction mixture were found to afford the desired potassium trifluoroborates of sufficient purity (>95%) in nearly quantitative yields irrespective of the nature of the product. The utility of this
    报道了从相应的频哪醇硼酸酯制备几乎任何三氟硼酸钾盐的通用方法。因此,发现从反应混合物中共沸除去频哪醇的条件以几乎定量的产率提供了具有足够纯度(> 95%)的所需三氟硼酸钾,而与产物的性质无关。通过制备大量对映体富集的仲和叔三氟硼酸钾说明了该方法的实用性。
  • NEW PHENYLAZETIDINECARBOXYLATE OR -CARBOXAMIDE COMPOUNDS
    申请人:INVENTIVA
    公开号:US20170066717A1
    公开(公告)日:2017-03-09
    The invention relates to compounds of formula (I). where R, R 1 , R 2 , n, A and Cy have the meanings indicated in the description. The compounds of formula (I) are Nurr-1 modulators.
    这项发明涉及式(I)的化合物。 其中R、R1、R2、n、A和Cy的含义如描述中所示。 式(I)的化合物是Nurr-1调节剂。
  • Highly Selective Allylborations of Aldehydes Using α,α-Disubstituted Allylic Pinacol Boronic Esters
    作者:Matthew J. Hesse、Stéphanie Essafi、Charlotte G. Watson、Jeremy N. Harvey、David Hirst、Christine L. Willis、Varinder K. Aggarwal
    DOI:10.1002/anie.201402995
    日期:2014.6.10
    α‐Disubstituted allylic pinacol boronic esters undergo highly selective allylborations of aldehydes to give tetrasubstituted homoallylic alcohols with exceptional levels of anti‐Zselectivity (>20:1). The scope of the reaction includes both acyclic and cyclic allylic boronic esters which lead to acyclic and exocyclic tetrasubstituted homoallylic alcohols. The use of β‐borylated allylic boronic esters gave fully
    α,α-二取代烯丙基频哪醇硼酸酯经历的高选择性allylborations醛,得到四取代的高烯丙醇与特殊水平的抗- ž -选择性(> 20:1)。反应范围包括产生无环和环外四取代均烯丙基醇的无环和环状烯丙基硼酸酯。使用β-硼化的烯丙基硼酸酯得到带有硼酸酯的完全取代的烯烃,该酯经过进一步的交叉偶联,从而实现了高度模块化和立体选择性的方法合成二芳基四取代的烯烃。计算分析揭示了观察到的显着选择性的起源。
  • [EN] HETEROCYCLYLPYRI (MI) DINYLPYRAZOLE AS FUNGICIDALS<br/>[FR] HÉTÉROCYCLYLPYRIDINYLPYRAZOLE ET HÉTÉROCYCLYLPYRIMIDINYLPYRAZOLE UTILISÉS COMME FONGICIDES
    申请人:BAYER IP GMBH
    公开号:WO2013050437A1
    公开(公告)日:2013-04-11
    Heterocyclylpyri(mi)dinylpyrazole of the formula (I) in which R1 to R5, X1, U, Q, W, Y, n, a, b have the meanings given in the description, and agrochemically active salts, to their use and to methods and compositions for controlling phytopathogenic harmful fungi in and/or on plants or in and/or on seed of plants and for reducing mycotoxins in plants and parts of the plants, to processes for preparing such compounds and compositions and treated seed and also to their use for controlling phytopathogenic harmful fungi in agriculture, horticulture, forestry, in animal husbandry, in the protection of materials, in the domestic and hygiene field and for the reduction of mycotoxins in plants and parts of the plants.
    公式(I)中的杂环基吡唑啉基吡唑,其中R1至R5、X1、U、Q、W、Y、n、a、b具有说明书中给出的含义,以及农化活性盐,及其用途,以及用于控制和/或在植物上或植物种子上防治植物病原有害真菌的方法和组合物,以及用于减少植物及植物部分的霉菌毒素,以及用于制备此类化合物和组合物以及处理过的种子的方法,以及它们用于在农业、园艺、林业、畜牧业、材料保护、家庭和卫生领域控制和防治植物病原有害真菌的用途,以及用于减少植物及植物部分的霉菌毒素。
查看更多