N-异丙基甲基丙烯酰胺 | 13749-61-6

• 物质功能分类: 有机原料 - 氨基化合物 - 酰胺类化合物
• 分子结构分类: 有机化合物 - 有机酸及其衍生物 - 羧酸及其衍生物
• 中文名称: N-异丙基甲基丙烯酰胺
• 中文别名: N-异丙基-2-甲基丙烯酰胺；N-异丙基甲醛丙烯酰胺
• 英文名称: N-isopropylmethacrylamide
• 英文别名: 2-methyl-N-propan-2-ylprop-2-enamide
• CAS: 13749-61-6
• 化学式: C₇H₁₃NO
• mdl: MFCD00192246
• 分子量: 127.186
• InChiKey: YQIGLEFUZMIVHU-UHFFFAOYSA-N

物化性质

• 熔点：
  89-91 °C (lit.)
• 沸点：
  241.1±13.0 °C(Predicted)
• 密度：
  0.875±0.06 g/cm3(Predicted)
• LogP：
  0.491 at 30℃

计算性质

• 辛醇/水分配系数(LogP)：
  1.3
• 重原子数：
  9
• 可旋转键数：
  2
• 环数：
  0.0
• sp3杂化的碳原子比例：
  0.571
• 拓扑面积：
  29.1
• 氢给体数：
  1
• 氢受体数：
  1

安全信息

• 危险品标志：
  Xi
• 危险类别码：
  R36/37/38
• WGK Germany：
  3
• 海关编码：
  2924199090
• 安全说明：
  S26,S36
• 危险标志：
  GHS07
• 危险性描述：
  H315,H319,H335
• 危险性防范说明：
  P261,P305 + P351 + P338
• 储存条件：
  存储条件：室温、干燥且密封。

SDS

---

Section 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product identifiers
Product name : N-Isopropylmethacrylamide
CAS-No. : 13749-61-6
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

Section 2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Skin irritation (Category 2)
Eye irritation (Category 2)
Specific target organ toxicity - single exposure (Category 3)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Irritating to eyes, respiratory system and skin.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word Warning
Hazard statement(s)
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Precautionary statement(s)
P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazard none
Statements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R36/37/38 Irritating to eyes, respiratory system and skin.
S-phrase(s)
S26 In case of contact with eyes, rinse immediately with plenty of water and
seek medical advice.
S36 Wear suitable protective clothing.
Other hazards - none

---

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Formula : C7H13NO
Molecular Weight : 127,18 g/mol
Component Concentration
N-Isopropylmethacrylamide
CAS-No. 13749-61-6 -
EC-No. 237-331-7

---

Section 4. FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Indication of any immediate medical attention and special treatment needed
no data available

---

Section 5. FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, nitrogen oxides (NOx)
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

Section 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

Section 7. HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
protection.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Specific end uses
no data available

---

Section 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher
level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges.
Use respirators and components tested and approved under appropriate government standards
such as NIOSH (US) or CEN (EU).

---

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a) Appearance Form: powder
Colour: off-white
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing Melting point/range: 89 - 91 °C - lit.
point
f) Initial boiling point and no data available
boiling range
g) Flash point no data available
h) Evaporation rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density no data available
n) Water solubility no data available
o) Partition coefficient: n- no data available
octanol/water
p) Autoignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

Section 10. STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available

---

Section 11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
Inhalation - May cause respiratory irritation.
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation May be harmful if inhaled. Causes respiratory tract irritation.
Ingestion May be harmful if swallowed.
Skin May be harmful if absorbed through skin. Causes skin irritation.
Eyes Causes serious eye irritation.
Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Additional Information
RTECS: Not available

---

Section 12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available

---

Section 13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
professional waste disposal service to dispose of this material. Dissolve or mix the material with a
combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

Section 14. TRANSPORT INFORMATION
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
no data available

---

Section 15. REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
no data available

---

Section 16. OTHER INFORMATION
Further information
Copyright 2012 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

反应信息

• 作为反应物：
  描述：

  N-异丙基甲基丙烯酰胺 在 碘 、 三乙胺 作用下， 生成 N-isopropyl-2-(tosylmethyl)acrylamide
  参考文献：
  名称：

  Simple synthesis of α-methylene esters and amides from methacrylic derivatives via tosylated intermediates

  摘要：

  DOI：

  10.1016/s0040-4039(01)80672-9
• 作为产物：
  描述：

  异丙醇 、 甲基丙烯腈 在 硫酸 、 铜 、 对苯二酚 作用下， 生成 N-异丙基甲基丙烯酰胺
  参考文献：
  名称：

  Production of nu-isopropylmethacrylamide

  摘要：

  公开号：

  US02448991A1

文献信息

• [EN] ENCAPSULATES<br/>[FR] PRODUITS ENCAPSULÉS
  申请人：PROCTER & GAMBLE

  公开号：WO2013022949A1

  公开（公告）日：2013-02-14

  The present application relates to encapsulates, compositions, products comprising such encapsulates, and processes for making and using such encapsulates. Such encapsulates comprise a core comprising a perfume and a shell that encapsulates said core, such encapsulates may optionally comprise a parametric balancing agent, such shell comprising one or more azobenzene moieties.

  本申请涉及封装体、组合物、包含这种封装体的产品，以及制备和使用这种封装体的方法。这种封装体包括一个包含香水的核心和封装该核心的壳，这种封装体可以选择性地包含一个参数平衡剂，该壳包括一个或多个偶氮苯基团。
• [EN] LIGHT HARVESTING ARRAY<br/>[FR] RÉSEAU COLLECTEUR DE LUMIÈRE
  申请人：FLUROSOL IND PTY LTD

  公开号：WO2015024064A1

  公开（公告）日：2015-02-26

  The invention relates to a light harvesting array or dye comprising an acceptor linked to a donor, wherein at least one of the acceptor or the donor is an oligomeric unit comprising a first optionally substituted rylene linked via a linker group to a second optionally substituted rylene, the first optionally substituted rylene is linked to the acceptor or the donor and the second optionally substituted rylene is capable of energy transfer to at least one of the first optionally substituted rylene, the acceptor or the donor. The invention also relates to compounds which may be used as light harvesting arrays, methods for their manufacture, and devices and materials comprising the light harvesting array or dye, for example, chromophoric materials, light guides, photobioreactors, photoluminescent algae systems, photodetectors, photovoltaic devices and luminescent/fluorescent solar concentrators.

  该发明涉及一种光收集阵列或染料，包括一个与给体相连的受体，其中受体或给体中至少有一个是包含第一可选择取代的芳香烃单元通过连接基团连接到第二可选择取代的芳香烃的寡聚单元，第一可选择取代的芳香烃与受体或给体相连，第二可选择取代的芳香烃能够将能量传递至第一可选择取代的芳香烃、受体或给体中的至少一个。该发明还涉及可用作光收集阵列的化合物，其制造方法，以及包括光收集阵列或染料的设备和材料，例如，色素材料、光导管、光生物反应器、光致发光藻类系统、光探测器、光伏器件和发光/荧光太阳能聚光器。
• Ir(III)-Catalyzed Mild C–H Amidation of Arenes and Alkenes: An Efficient Usage of Acyl Azides as the Nitrogen Source
  作者：Jaeyune Ryu、Jaesung Kwak、Kwangmin Shin、Donggun Lee、Sukbok Chang

  DOI：10.1021/ja406383h

  日期：2013.8.28

  development of the Ir(III)-catalyzed direct C-H amidation of arenes and alkenes using acyl azides as the nitrogen source. This procedure utilizes an in situ generated cationic half-sandwich iridium complex as a catalyst. The reaction takes place under very mild conditions, and a broad range of sp(2) C-H bonds of chelate group-containing arenes and olefins are smoothly amidated with acyl azides without the intervention

  本文报道了使用酰基叠氮化物作为氮源的 Ir(III) 催化的芳烃和烯烃的直接 CH 酰胺化的发展。该程序利用原位生成的阳离子半夹心铱络合物作为催化剂。该反应在非常温和的条件下进行，含螯合基团的芳烃和烯烃的范围广泛的 sp(2) CH 键与酰基叠氮化物顺利酰胺化，而无需 Curtius 重排的干预。值得注意的是，芳基-、脂肪-和烯基酰基叠氮化物的各种反应物均以高官能团耐受性有效地酰胺化。使用开发的方法，Z-烯酰胺很容易获得，完全控制区域和立体选择性。
• [EN] FORCE-RESPONSIVE POLYMERSOMES AND NANOREACTORS; PROCESSES UTILIZING THE SAME<br/>[FR] POLYMERSOMES ET NANORÉACTEURS SENSIBLES À LA FORCE; PROCÉDÉS LES UTILISANT
  申请人：ADOLPHE MERKLE INSTITUTE UNIV OF FRIBOURG

  公开号：WO2019034597A1

  公开（公告）日：2019-02-21

  The mechanically induced melting properties of DNA were employed to achieve force labile membranes is described. Nucleobase pairs were used as mechanophores. Adenine and thymine functionalized complementary amphiphilic block copolymers were self-assembled into polymersomes. The nucleobases formed hydrogen bonds which were disrupted upon force stimulation. The exposure of the disconnected nucleobases to the hydrophobic matrix of the membranes lead to a change of permeability which permitted the exchange of water-soluble molecules throughout the polymer matrix. Moreover, the encapsulation of horseradish peroxidase enabled the reaction of luminol with hydrogen peroxide to yield a luminescence producing species similar to the marine bioluminescence. Moreover, the same nano-reactors were employed to catalyze the formation of a polyacrylamide gel when force was applied. Insights into the change of permeability of supramolecular networks upon force are provided. These systems are useful for drug delivery, as nanoreactors and for the selective release of curing agents for 3D printing, or fragrances.

  DNA的机械诱导熔化特性被用来实现易受力破裂的膜。核碱基对被用作机械感受器。腺嘌呤和胸腺嘧啶功能化的互补两性分块共聚物自组装成聚合体囊。核碱基形成氢键，在受力刺激下被破坏。断开的核碱基暴露在膜的疏水基质中，导致渗透性的改变，从而允许水溶性分子在聚合物基质中交换。此外，封装辣根过氧化物酶使得辣根酰胺与过氧化氢反应产生类似海洋生物发光的发光物种。此外，当施加力时，相同的纳米反应器被用来催化聚丙烯酰胺凝胶的形成。提供了关于受力下超分子网络渗透性变化的见解。这些系统可用于药物传递、纳米反应器以及用于3D打印的固化剂或香料的选择性释放。
• Innervated artificial tissues and uses thereof
  申请人：Griffith May

  公开号：US20060034807A1

  公开（公告）日：2006-02-16

  A three dimensional, innervated artificial tissue comprising a bio-synthetic matrix is provided. The artificial tissue supports cell growth, including surface coverage and three-dimensional cell in-growth, as well as nerve in-growth. Methods of preparing the innervated artificial tissue and methods of innervating artificial tissues or tissue substitutes are also provided. The artificial tissue is useful for in vitro testing of various pharmaceutical, cosmetic and household products.

  提供了一种包括生物合成基质的三维神经化人工组织。这种人工组织支持细胞生长，包括表面覆盖和三维细胞生长，以及神经生长。还提供了制备这种神经化人工组织的方法，以及神经化人工组织或组织替代品的方法。这种人工组织对于体外测试各种药物、化妆品和家用产品非常有用。

表征谱图