7-溴-2-甲基吲哚 | 302912-38-5

• 物质功能分类: 医药中间体 - 杂环化合物 - 吲哚类化合物
• 分子结构分类: 有机化合物 - 有机杂环化合物 - 吲哚及其衍生物
• 中文名称: 7-溴-2-甲基吲哚
• 英文名称: 7-bromo-2-methyl-1H-indole
• 英文别名: 2-methyl-7-bromoindole；7-bromo-2-methyl-indole；7-Bromo-2-methylindole
• CAS: 302912-38-5
• 化学式: C₉H₈BrN
• 分子量: 210.073
• InChiKey: YFEGQGALXHJBIQ-UHFFFAOYSA-N

物化性质

• 沸点：
  285 °C (lit.)
• 密度：
  1.472 g/mL at 25 °C (lit.)
• 闪点：
  230 °F
• 稳定性/保质期：
  在常温常压下稳定，应避免与强氧化剂接触。

计算性质

• 辛醇/水分配系数(LogP)：
  3.1
• 重原子数：
  11
• 可旋转键数：
  0
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.11
• 拓扑面积：
  15.8
• 氢给体数：
  1
• 氢受体数：
  0

安全信息

• 危险品标志：
  Xi
• 安全说明：
  S26,S36
• 危险类别码：
  R36/37/38
• 海关编码：
  2933990090
• WGK Germany：
  3

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : 7-Bromo-2-methylindole
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No. : 302912-38-5
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Skin irritation (Category 2), H315
Eye irritation (Category 2), H319
Specific target organ toxicity - single exposure (Category 3), H335
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Xi Irritant R36/37/38
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal word Warning
Hazard statement(s)
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Precautionary statement(s)
P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazard none
Statements
Other hazards - none

---

SECTION 3: Composition/information on ingredients
Substances
Formula : C9H8BrN
Molecular Weight : 210,07 g/mol
CAS-No. : 302912-38-5
Hazardous ingredients according to Regulation (EC) No 1272/2008
Component Classification Concentration
7-Bromo-2-methylindole
CAS-No. 302912-38-5 Skin Irrit. 2; Eye Irrit. 2; STOT <= 100 %
SE 3; H315, H319, H335
Hazardous ingredients according to Directive 1999/45/EC
Component Classification Concentration
7-Bromo-2-methylindole
CAS-No. 302912-38-5 Xi, R36/37/38 <= 100 %
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, nitrogen oxides (NOx), Hydrogen bromide gas
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
protection.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Recommended storage temperature: 2 - 8 °C
Store under inert gas.
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher
level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges.
Use respirators and components tested and approved under appropriate government standards
such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing no data available
point
f) Initial boiling point and 285 °C - lit.
boiling range
g) Flash point 110 °C - closed cup
h) Evapouration rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density 1,472 g/mL at 25 °C
n) Water solubility no data available
o) Partition coefficient: n- no data available
octanol/water
p) Auto-ignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
Inhalation - May cause respiratory irritation.
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

---

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
professional waste disposal service to dispose of this material. Dissolve or mix the material with a
combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
no data available

---

---

SECTION 15 - REGULATORY INFORMATION
N/A

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  7-溴-2-甲基吲哚 在 双(三环己基膦)二氯化钯 四丁基氟化铵 、 sodium hydride 作用下， 以 四氢呋喃 、 N,N-二甲基甲酰胺 为溶剂， 反应 13.25h， 生成 4-(1-isopropyl-2-methyl-1H-indol-7-ylethynyl)-7H-pyrrolo[2,3-d]pyrimidine
  参考文献：
  名称：

  [EN] PYRROLOPYRIMIDINE ALKYNYL COMPOUNDS AND METHODS OF MAKING AND USING SAME
  [FR] COMPOSÉS D'ALCYNYLE DE PYRROLOPYRIMIDINE ET LEURS PROCÉDÉS DE PRÉPARATION ET D'UTILISATION

  摘要：

  本发明提供了吡咯并嘧啶炔基化合物及其制备和使用方法。此类化合物可用于治疗炎症或骨髓增生性疾病。本发明还提供了治疗癌症的方法。

  公开号：

  WO2009055674A1
• 作为产物：
  描述：

  1-溴-2-硝基苯 、 异丙烯基溴化镁 在 水 、 氯化铵 作用下， 以 四氢呋喃 为溶剂， 反应 1.0h， 生成 7-溴-2-甲基吲哚
  参考文献：
  名称：

  Indole derivatives, method for preparating same and pharmaceutical compositions containing same

  摘要：

  本发明提供了以下化合物的化学式，并提供了它们的制备方法以及包含它们的药物组合物。这些化合物是CB2大麻素受体的配体。

  公开号：

  US20060089345A1

文献信息

• [EN] INTRACELLULAR RECEPTOR MODULATOR COMPOUNDS AND METHODS<br/>[FR] COMPOSÉS MODULATEURS DE RÉCEPTEURS INTRACELLULAIRES ET PROCÉDÉS DE PRODUCTION ET D'UTILISATION DE CEUX-CI
  申请人：LIGAND PHARM INC

  公开号：WO2006019716A1

  公开（公告）日：2006-02-23

  This invention relates to compounds of Formula I, II or III with the definitions of R1-R10 according to claim 1 that bind to intracellular receptors and/or modulate activity of intracellular receptors, and to methods for making and using such compounds.

  这项发明涉及具有根据权利要求1中R1-R10的定义的化合物I、II或III，这些化合物与细胞内受体结合和/或调节细胞内受体活性，并涉及制备和使用这类化合物的方法。
• Hypoglycemic imidazoline compounds
  申请人：ELI LILLY AND COMPANY

  公开号：EP1266897A3

  公开（公告）日：2003-12-03

  This invention relates to certain novel imidazoline compounds and analogues thereof, to their use for the treatment of diabetes, diabetic complications, metabolic disorders, or related diseases where impaired glucose disposal is present, to pharmaceutical compositions comprising them, and to processes for their preparation.The compounds have the following formula: whereinX is -O-, -S-, or -NR5-;R5 is hydrogen, C1-8 alkyl, or an amino protecting group;R4 isY is -O-, -S-, or -NR8-;Y' is -O- or -S-;

  本发明涉及某些新型的咪唑啉化合物及其类似物，以及它们用于治疗糖尿病、糖尿病并发症、代谢紊乱或相关疾病中的糖利用受损情况，涉及包含它们的药物组合物，以及它们的制备过程。这些化合物的公式如下：其中X是-O-，-S-，或-NR5-；R5是氢，C1-8烷基，或氨基保护基团；R4是Y是-O-，-S-，或-NR8-；Y'是-O-或-S-；
• [EN] SUBSTITUTED TRIAZOLO QUINOXALINE DERIVATIVES<br/>[FR] DÉRIVÉS DE TRIAZOLO-QUINOXALINE SUBSTITUÉS
  申请人：GRUENENTHAL GMBH

  公开号：WO2020016453A1

  公开（公告）日：2020-01-23

  The present invention relates to compounds according to general formula (I) which act as modulators of the glucocorticoid receptor and can be used in the treatment and/or prophylaxis of disorders which are at least partially mediated by the glucocorticoid receptor.

  本发明涉及符合一般式(I)的化合物，其作为糖皮质激素受体的调节剂，并可用于治疗和/或预防至少部分由糖皮质激素受体介导的疾病。
• Indole, indazole and indoline derivatives as CETP inhibitors
  申请人：Conte-Mayweg Aurelia

  公开号：US20060030613A1

  公开（公告）日：2006-02-09

  The present invention relates to compounds of formula (I): wherein —X—Y—, R 1 to R 11 and n are as defined in the description and claims, and pharmaceutically acceptable salts thereof. The compounds are useful for the treatment and/or prevention of diseases which are mediated by CETP inhibitors.

  本发明涉及以下式(I)的化合物： 其中-X-Y-, R1至R11和n如描述和权利要求中所定义，并且其药学上可接受的盐。这些化合物对于治疗和/或预防通过CETP抑制剂介导的疾病是有用的。
• [EN] INDOLE-DERIVATIVE MODULATORS OF STEROID HORMONE NUCLEAR RECEPTORS<br/>[FR] MODULATEURS A BASE DE DERIVES INDOLIQUES DES RECEPTEURS NUCLEAIRES DES HORMONES STEROIDES
  申请人：LILLY CO ELI

  公开号：WO2004067529A1

  公开（公告）日：2004-08-12

  The present invention provides a compound of formula I or a pharmaceutically acceptable salt thereof, pharmaceutical compositions comprising an effective amount of a compound of Formula I in combination with a suitable carrier, diluent, or excipient, and methods for treating physiological disorders, particularly congestive heart disease, comprising administering to a patient in thereof an effective amount of a compound of Formula I.

  本发明提供了一种I式化合物或其药学上可接受的盐，包括I式化合物的有效量与适当载体、稀释剂或赋形剂组合而成的药物组合物，以及治疗生理紊乱的方法，特别是充血性心脏病，包括向患者施用I式化合物的有效量。