1-(4-氟苯基磺酰)吡咯啉 | 157187-14-9

• 物质功能分类: 原料药 - 人工合成抗感染类药 - 磺胺类药及增效剂
• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 中文名称: 1-(4-氟苯基磺酰)吡咯啉
• 中文别名: 1-(4-氟苯基磺酰基)吡咯烷；1-((4-氟苯基)磺酰)吡咯烷
• 英文名称: 1-((4-fluorophenyl)sulfonyl)pyrrolidine
• 英文别名: 1-(4-fluorophenyl)sulfonylpyrrolidine
• CAS: 157187-14-9
• 化学式: C₁₀H₁₂FNO₂S
• mdl: MFCD00783756
• 分子量: 229.275
• InChiKey: BLFZDHIRHPQTDJ-UHFFFAOYSA-N

物化性质

• 沸点：
  336.8±44.0 °C(Predicted)
• 密度：
  1.338
• 溶解度：
  >34.4 [ug/mL]

计算性质

• 辛醇/水分配系数(LogP)：
  1.7
• 重原子数：
  15
• 可旋转键数：
  2
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.4
• 拓扑面积：
  45.8
• 氢给体数：
  0
• 氢受体数：
  4

安全信息

• 危险品标志：
  Xi
• 海关编码：
  2935009090
• 储存条件：
  室温

SDS

Material Safety Data Sheet

---

Section 1. Identification of the substance
Product Name: 1-(4-Fluorophenylsulfonyl)pyrrolidine
Synonyms: 1-Fluoro-4-(pyrrolidinosulfonyl)benzene

---

Section 2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.

---

Section 3. Composition/information on ingredients.
Ingredient name: 1-(4-Fluorophenylsulfonyl)pyrrolidine
CAS number: 157187-14-9

---

Section 4. First aid measures
Skin contact: Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact: Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion: Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

---

Section 5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

---

Section 6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution: Wear approved mask/respirator
Hand precaution: Wear suitable gloves/gauntlets
Skin protection: Wear suitable protective clothing
Eye protection: Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

---

Section 7. Handling and storage
Handling: This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Store in closed vessels.
Storage:

---

Section 8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

---

Section 9. Physical and chemical properties
Appearance: Not specified
Boiling point: No data
No data
Melting point:
Flash point: No data
Density: No data
Molecular formula: C10H12FNO2S
Molecular weight: 229.3

---

Section 10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, hydrogen fluoride, sulfur oxides.

---

Section 11. Toxicological information
No data.

---

Section 12. Ecological information
No data.

---

Section 13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

---

Section 14. Transportation information
Non-harzardous for air and ground transportation.

---

Section 15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  1-(4-氟苯基磺酰)吡咯啉 在 H2 、 NaH 、 苯甲醇 作用下， 以 N,N-二甲基甲酰胺 、 mineral oil 为溶剂， 以14.85 g (95%)的产率得到4-(pyrrolidinosulfonyl)-phenylbenzylether
  参考文献：
  名称：

  Angiotensin II antagonists

  摘要：

  这项发明提供了新型苯基和杂环衍生物，它们的药物配方以及它们在哺乳动物中拮抗血管紧张素II受体的使用方法。

  公开号：

  US05401851A1
• 作为产物：
  描述：

  1-((4-chlorophenyl)sulfonyl)pyrrolidine 在 四甲基氟化铵 作用下， 以 二甲基亚砜 为溶剂， 反应 24.0h， 以31%的产率得到1-(4-氟苯基磺酰)吡咯啉
  参考文献：
  名称：

  用于 SNAr 氟化的四甲基氟化铵醇加合物

  摘要：

  亲核芳族氟化 (S N Ar) 是形成 C(sp 2 )-F 键的最常用方法之一。尽管最近取得了许多进展，但这些转化的长期限制是需要严格干燥的非质子条件来保持氟化物的亲核性并抑制副产物的产生。本报告通过利用四甲基氟化铵醇加合物 (Me 4 NF·ROH) 作为 S N Ar 氟化的氟化物来源解决了这一挑战。通过系统调整醇取代基 (R)，四甲基氟化铵叔戊醇 (Me 4 NF· t-AmylOH) 被确定为在温和方便的条件下（DMSO 中 80°C，无需干燥试剂或溶剂）下用于 S N Ar 氟化的廉价、实用且台式稳定的试剂。展示了超过 50 种（杂）芳基卤化物和硝基芳烃亲电子试剂的底物范围。

  DOI：

  10.1021/acs.orglett.1c01490

文献信息

• Iodine-catalyzed sulfonylation of sulfonyl hydrazides with <i>tert</i>-amines: a green and efficient protocol for the synthesis of sulfonamides
  作者：Jinyang Chen、Xiaoran Han、Lan Mei、Jinchuan Liu、Kui Du、Tuanwu Cao、Qiang Li

  DOI：10.1039/c9ra07361b

  日期：——

  This study provides a direct, sustainable and eco-friendly method for the synthesis of various sulfonamides via the sulfonylation of sulfonyl hydrazides with tert-amines. The method utilizes sulfonyl hydrazides to oxidize and couple with tertiary amines through selective cleavage of C–N bonds. In this reaction, molecular iodine was used as the catalyst and t-butyl hydroperoxide was used as the oxidant

  该研究为通过磺酰肼与叔胺磺酰化合成各种磺胺类药物提供了一种直接、可持续和环保的方法。该方法利用磺酰肼氧化并通过选择性裂解 C-N 键与叔胺偶联。在该反应中，分子碘用作催化​​剂，叔丁基过氧化氢用作氧化剂。
• NAPHTHYLACETIC ACIDS
  申请人：Chen Li

  公开号：US20100125058A1

  公开（公告）日：2010-05-20

  The invention is concerned with the compounds of formula I: and pharmaceutically acceptable salts and esters thereof, wherein W, X, Y, and R 1 -R 7 are defined in the detailed description and claims. In addition, the present invention relates to methods of manufacturing and using the compounds of formula I as well as pharmaceutical compositions containing such compounds. The compounds of formula I are antagonists or partial agonists at the CRTH2 receptor and may be useful in treating diseases and disorders associated with that receptor such as asthma.

  这项发明涉及公式I的化合物： 以及其药学上可接受的盐和酯，其中W、X、Y和R1-R7在详细说明和权利要求中有定义。此外，本发明涉及制造和使用公式I化合物的方法，以及含有这些化合物的药物组合物。公式I的化合物是CRTH2受体的拮抗剂或部分激动剂，可能在治疗与该受体相关的疾病和紊乱方面有用，如哮喘。
• [EN] METHYLAMINE DERIVATIVES AS LYSYSL OXIDASE INHIBITORS FOR THE TREATMENT OF CANCER<br/>[FR] DÉRIVÉS DE LA MÉTHYLAMINE COMME INHIBITEURS DE LA LYSYL OXIDASE POUR LE TRAITEMENT DU CANCER
  申请人：THE INST OF CANCER RESEARCH: ROYAL CANCER HOSPITAL

  公开号：WO2017141049A1

  公开（公告）日：2017-08-24

  Provided are compounds of the Formula (I), or a pharmaceutically acceptable salt thereof, wherein W, X, Y, Z, x, R1, R2, R3, x and n are defined in the specification. The compounds are inhibitors of lysyl oxidase (LOX) and lysyl oxidase-like (LOXL) family members (LOXL1, LOXL2, LOXL3, LOXL4) and are useful in therapy, particularly in the treatment of cancer. Also disclosed are LOX inhibitors for use in the treatment of a cancer associated with EGFR and biomarkers that predict responsiveness to a LOX inhibitor.

  提供的是Formula (I)的化合物，或其药用可接受的盐，其中W、X、Y、Z、x、R1、R2、R3、x和n在规范中有定义。这些化合物是赖氨酸氧化酶（LOX）和赖氨酸氧化酶样（LOXL）家族成员（LOXL1、LOXL2、LOXL3、LOXL4）的抑制剂，并且在治疗中很有用，特别是在癌症治疗中。还披露了用于治疗与EGFR相关的癌症的LOX抑制剂，以及预测对LOX抑制剂响应性的生物标志物。
• TBAI-catalyzed selective synthesis of sulfonamides and β-aryl sulfonyl enamines: coupling of arenesulfonyl chlorides and sodium sulfinates with <i>tert</i>-amines
  作者：Hongmei Jiang、Xiaoyue Tang、Zhihui Xu、Huixian Wang、Kang Han、Xiaolan Yang、Yuanyuan Zhou、Yong-Lai Feng、Xian-Yong Yu、Qingwen Gui

  DOI：10.1039/c8ob02992j

  日期：——

  A simple, practical and metal-free method has been developed for the synthesis of sulfonamides and β-arylsulfonyl enamines via the selective cleavage of C–N and C–H bonds through the iodine-catalyzed oxidation of arenesulfonyl chlorides and sodium sulfinates with tert-amines. The method uses commercially available inexpensive catalysts and oxidants, and has a wide substrate scope and operational simplicity

  一种简单，实用和不含金属的方法已被开发用于磺酰胺和β-芳基磺酰基的烯胺的合成通过的C-N和C-H键的选择性裂解通过芳烃磺酰基氯化物和钠基亚磺酸盐的碘催化氧化用叔-胺类。该方法使用可商购的廉价催化剂和氧化剂，并且具有广泛的底物范围和操作简便性。
• [EN] 1-(HET)ARYLSULFONYL-(PYRROLIDINE OR PIPERIDINE)-2-CARBOXAMIDE DERIVATIVES AND THEIR USE AS TRPA1 ANTAGONISTS<br/>[FR] DÉRIVÉS DE 1-(HET)ARYLSULFONYLE- (PYRROLIDINE OU PIPÉRIDINE)-2-CARBOXAMIDE ET LEUR UTILISATION COMME ANTAGONISTES DE TRPA1
  申请人：HOFFMANN LA ROCHE

  公开号：WO2016128529A1

  公开（公告）日：2016-08-18

  The invention is concerned with the compounds of formula I and salts thereof and other compounds of formulas II-IX as disclosed herein. In addition, the present invention relates to methods of manufacturing and methods of using the compounds of formulas I-IX as well as pharmaceutical compositions containing such compounds. The compounds may be useful in treating diseases and conditions mediated by TRPA1, such as pain or asthma.

  本发明涉及公式I的化合物及其盐，以及如本文所述的公式II-IX的其他化合物。此外，本发明还涉及制造和使用公式I-IX化合物的方法，以及含有这些化合物的药物组合物。这些化合物可能对治疗由TRPA1介导的疾病和状况，如疼痛或哮喘等有帮助。