tert-butyl 15-amino-25-(1,2-dithiolan-3-yl)-14,21-dioxo-4,7,10-trioxa-13,20-diazapentacosan-1-oate

• 分子结构分类: 有机化合物 - 有机杂环化合物 - 二硫杂环戊烷
• 英文名称: tert-butyl 15-amino-25-(1,2-dithiolan-3-yl)-14,21-dioxo-4,7,10-trioxa-13,20-diazapentacosan-1-oate
• 英文别名: Tert-butyl 3-[2-[2-[2-[[2-amino-6-[5-(dithiolan-3-yl)pentanoylamino]hexanoyl]amino]ethoxy]ethoxy]ethoxy]propanoate；tert-butyl 3-[2-[2-[2-[[2-amino-6-[5-(dithiolan-3-yl)pentanoylamino]hexanoyl]amino]ethoxy]ethoxy]ethoxy]propanoate
• 化学式: C₂₇H₅₁N₃O₇S₂
• 分子量: 593.85
• InChiKey: AILANZNMDYSIIP-UHFFFAOYSA-N

计算性质

• 辛醇/水分配系数(LogP)：
  1.3
• 重原子数：
  39
• 可旋转键数：
  25
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.89
• 拓扑面积：
  189
• 氢给体数：
  3
• 氢受体数：
  10

反应信息

• 作为反应物：
  描述：

  6-O-(carboxymethyl)fluorescein ethyl ester 、 tert-butyl 15-amino-25-(1,2-dithiolan-3-yl)-14,21-dioxo-4,7,10-trioxa-13,20-diazapentacosan-1-oate 在 N,N-二异丙基乙胺 、 Methanaminium,N-[(dimethylamino)(3H-1,2,3-triazolo[4,5-b]pyridin-3-yloxy)methylene]-N-methyl-, hexafluorophosphate(1-) 作用下， 以 N,N-二甲基甲酰胺 为溶剂， 反应 23.0h， 以60%的产率得到tert-butyl 25-(1,2-dithiolan-3-yl)-15-({2-[9-(2-ethoxycarbonyl)phenyl]-3-oxo-3H-xanthen-6-yloxy}acetamido)-14,21-dioxo-4,7,10-trioxa-13,20-diazapentacosan-1-oate
  参考文献：
  名称：

  Synthesis of SERS active nanoparticles for detection of biomolecules

  摘要：

  Surface Enhanced Raman Scattering (SERS) can be used to detect specific DNA sequences by methods based on hybridisation of oligonucleotide functionalized nanoparticles to complementary DNA sequences. The problem, which has to be overcome to use this technique is that DNA is not strongly SERS active. This is due to the lack of a visible chromophore and presence of the highly negatively charged phosphate backbone, which prevents the electrostatic interaction with the metal surface necessary for the enhancement. To obtain SERS active DNA a label containing a surface seeking group, to allow adsorption of DNA on a metal surface, and a chromophore has to be attached to the DNA strand. Here we report the synthesis of three linkers containing a Raman tag [the following fluorophores were used for this purpose due to the fluorescence quenching ability of metallic nanoparticles: fluorescein, 6-aminofluorescein and tetramethylrhodamine (TAMRA)], surface complexing group (cyclic disulphide thioctic acid) and a chemical functionality for attachment of DNA (carboxyl group). Each of the linkers also contain poly(ethylene glycol) (PEG) (3 mer), which reduces non-specific adsorption of molecules to the surface of the nanoparticles and provides colloidal stability. The synthesized linkers were used to functionalize gold citrate (18 and 50 nm), silver citrate (40 nm) and silver EDTA (35 nm) nanoparticles. All of the conjugates exhibit high stability, gave good SERS responses at laser excitation frequencies of 514 and 633 nm and could be conjugated to amino-modified oligonucleotides in the presence of the commonly used (N-(3-dimethylaminopropyl)-N'-ethyl carbodiimide hydrochloride-EDC center dot HCl with N-hydroxysulfosuccinimide or 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride-DMT MM, which has not been used for bioconjugate preparation previously. This approach is less time consuming and less expensive than previously used protocols and does not require the formation of a mixed layer of oligonucleotides and Raman reporter on the metal surface. Additionally the presence of a reactive functionality within the linker structure makes it possible to conjugate the linker to other biomolecules of interest such as proteins. (C) 2011 Elsevier Ltd. All rights reserved.

  DOI：

  10.1016/j.tet.2011.11.053
• 作为产物：
  描述：

  3-[2-(2-(2-氨基乙氧基)乙氧基)乙氧基]丙酸叔丁酯 在 哌啶 、 bismuth(III) chloride 、 水 、 三乙胺 、 N,N'-二异丙基碳二亚胺 作用下， 以 二氯甲烷 、 乙腈 为溶剂， 反应 55.0h， 生成 tert-butyl 15-amino-25-(1,2-dithiolan-3-yl)-14,21-dioxo-4,7,10-trioxa-13,20-diazapentacosan-1-oate
  参考文献：
  名称：

  Synthesis of SERS active nanoparticles for detection of biomolecules

  摘要：

  Surface Enhanced Raman Scattering (SERS) can be used to detect specific DNA sequences by methods based on hybridisation of oligonucleotide functionalized nanoparticles to complementary DNA sequences. The problem, which has to be overcome to use this technique is that DNA is not strongly SERS active. This is due to the lack of a visible chromophore and presence of the highly negatively charged phosphate backbone, which prevents the electrostatic interaction with the metal surface necessary for the enhancement. To obtain SERS active DNA a label containing a surface seeking group, to allow adsorption of DNA on a metal surface, and a chromophore has to be attached to the DNA strand. Here we report the synthesis of three linkers containing a Raman tag [the following fluorophores were used for this purpose due to the fluorescence quenching ability of metallic nanoparticles: fluorescein, 6-aminofluorescein and tetramethylrhodamine (TAMRA)], surface complexing group (cyclic disulphide thioctic acid) and a chemical functionality for attachment of DNA (carboxyl group). Each of the linkers also contain poly(ethylene glycol) (PEG) (3 mer), which reduces non-specific adsorption of molecules to the surface of the nanoparticles and provides colloidal stability. The synthesized linkers were used to functionalize gold citrate (18 and 50 nm), silver citrate (40 nm) and silver EDTA (35 nm) nanoparticles. All of the conjugates exhibit high stability, gave good SERS responses at laser excitation frequencies of 514 and 633 nm and could be conjugated to amino-modified oligonucleotides in the presence of the commonly used (N-(3-dimethylaminopropyl)-N'-ethyl carbodiimide hydrochloride-EDC center dot HCl with N-hydroxysulfosuccinimide or 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride-DMT MM, which has not been used for bioconjugate preparation previously. This approach is less time consuming and less expensive than previously used protocols and does not require the formation of a mixed layer of oligonucleotides and Raman reporter on the metal surface. Additionally the presence of a reactive functionality within the linker structure makes it possible to conjugate the linker to other biomolecules of interest such as proteins. (C) 2011 Elsevier Ltd. All rights reserved.

  DOI：

  10.1016/j.tet.2011.11.053

文献信息

• Synthesis of SERS active nanoparticles for detection of biomolecules
  作者：Joanna Wrzesien、Duncan Graham

  DOI：10.1016/j.tet.2011.11.053

  日期：2012.1

  Surface Enhanced Raman Scattering (SERS) can be used to detect specific DNA sequences by methods based on hybridisation of oligonucleotide functionalized nanoparticles to complementary DNA sequences. The problem, which has to be overcome to use this technique is that DNA is not strongly SERS active. This is due to the lack of a visible chromophore and presence of the highly negatively charged phosphate backbone, which prevents the electrostatic interaction with the metal surface necessary for the enhancement. To obtain SERS active DNA a label containing a surface seeking group, to allow adsorption of DNA on a metal surface, and a chromophore has to be attached to the DNA strand. Here we report the synthesis of three linkers containing a Raman tag [the following fluorophores were used for this purpose due to the fluorescence quenching ability of metallic nanoparticles: fluorescein, 6-aminofluorescein and tetramethylrhodamine (TAMRA)], surface complexing group (cyclic disulphide thioctic acid) and a chemical functionality for attachment of DNA (carboxyl group). Each of the linkers also contain poly(ethylene glycol) (PEG) (3 mer), which reduces non-specific adsorption of molecules to the surface of the nanoparticles and provides colloidal stability. The synthesized linkers were used to functionalize gold citrate (18 and 50 nm), silver citrate (40 nm) and silver EDTA (35 nm) nanoparticles. All of the conjugates exhibit high stability, gave good SERS responses at laser excitation frequencies of 514 and 633 nm and could be conjugated to amino-modified oligonucleotides in the presence of the commonly used (N-(3-dimethylaminopropyl)-N'-ethyl carbodiimide hydrochloride-EDC center dot HCl with N-hydroxysulfosuccinimide or 4-(4,6-dimethoxy-1,3,5-triazin-2-yl)-4-methylmorpholinium chloride-DMT MM, which has not been used for bioconjugate preparation previously. This approach is less time consuming and less expensive than previously used protocols and does not require the formation of a mixed layer of oligonucleotides and Raman reporter on the metal surface. Additionally the presence of a reactive functionality within the linker structure makes it possible to conjugate the linker to other biomolecules of interest such as proteins. (C) 2011 Elsevier Ltd. All rights reserved.