3-甲基-1-茚酮 | 6072-57-7

• 物质功能分类: 医药中间体
• 分子结构分类: 有机化合物 - 苯类化合物 - 茚满类
• 中文名称: 3-甲基-1-茚酮
• 中文别名: 3-甲基-1-茚满酮
• 英文名称: 3-methylindanone
• 英文别名: 3-methyl-1-indanone；3-methylindan-1-one；3-methyl-2,3-dihydro-1H-inden-1-one；2,3-dihydro-3-methyl-1H-inden-1-one；3-methyl-2,3-dihydroinden-1-one
• CAS: 6072-57-7
• 化学式: C₁₀H₁₀O
• mdl: MFCD00156725
• 分子量: 146.189
• InChiKey: XVTQSYKCADSUHN-UHFFFAOYSA-N

物化性质

• 沸点：
  70-72 °C/0.7 mmHg (lit.)
• 密度：
  1.075 g/mL at 25 °C (lit.)
• 闪点：
  >230 °F
• 稳定性/保质期：
  1. 如果按照规格使用和储存，则不会分解，未有已知危险发生。
  2. 应避免与强氧化剂接触。
  3. 存在于主流烟气中。

计算性质

• 辛醇/水分配系数(LogP)：
  2
• 重原子数：
  11
• 可旋转键数：
  0
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.3
• 拓扑面积：
  17.1
• 氢给体数：
  0
• 氢受体数：
  1

安全信息

• 危险等级：
  IRRITANT
• 危险品标志：
  Xn
• 安全说明：
  S22,S26,S36/37/39
• 危险类别码：
  R22,R36/37/38
• WGK Germany：
  3
• 海关编码：
  2914399090
• 危险性防范说明：
  P280,P305+P351+P338
• 危险性描述：
  H302,H315,H319,H335
• 储存条件：
  请将药品存放在密闭、阴凉干燥的地方。

SDS

---

Section 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product identifiers
Product name : 3-Methyl-1-indanone
CAS-No. : 6072-57-7

---

Section 2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Label elements
Caution - substance not yet tested completely.
Other hazards - none

---

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Formula : C10H10O
Molecular Weight : 146,19 g/mol

---

Section 4. FIRST AID MEASURES
Description of first aid measures
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
In case of skin contact
Wash off with soap and plenty of water.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed
Indication of any immediate medical attention and special treatment needed
no data available

---

Section 5. FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

Section 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing vapors, mist or gas.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Sweep up and shovel. Keep in suitable, closed containers for disposal.
Reference to other sections
For disposal see section 13.

---

Section 7. HANDLING AND STORAGE
Precautions for safe handling
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
protection.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Specific end uses
no data available

---

Section 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
General industrial hygiene practice.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work-place., The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired,
use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU).

---

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing no data available
point
f) Initial boiling point and 70 - 72 °C at 0,9 hPa - lit.
boiling range
g) Flash point > 113,00 °C - closed cup
h) Evaporation rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density 1,075 g/cm3 at 25 °C
n) Water solubility no data available
o) Partition coefficient: n- no data available
octanol/water
p) Autoignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

Section 10. STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available

---

Section 11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation May be harmful if inhaled. May cause respiratory tract irritation.
Ingestion May be harmful if swallowed.
Skin May be harmful if absorbed through skin. May cause skin irritation.
Eyes May cause eye irritation.
Additional Information
RTECS: Not available

---

Section 12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available

---

Section 13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.

---

Section 14. TRANSPORT INFORMATION
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
no data available

---

Section 15. REGULATORY INFORMATION
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  3-甲基-1-茚酮 在 lithium aluminium tetrahydride 、 magnesium sulfate 作用下， 生成 甲茚
  参考文献：
  名称：

  Double-bond rearrangements of inden-1-yl derivatives

  摘要：

  DOI：

  10.1021/jo00894a012
• 作为产物：
  描述：

  3-氯-正丁酸 在 三氯化铝 、 苯 作用下， 生成 3-甲基-1-茚酮
  参考文献：
  名称：

  DE485309

  摘要：

  公开号：

文献信息

• Indenyl hydroxamic acids, (hydroxy) ureas and urethanes for treating
  申请人：Cell Pathways, Inc.

  公开号：US06071934A1

  公开（公告）日：2000-06-06

  Indenyl hydroxamic acids, (hydroxy) ureas and urethanes are useful in the treatment of precancerous lesions and neoplasms.

  吲哚羟羧酸，(羟基)脲和脲醚在治疗癌前病变和肿瘤中很有用。
• A direct catalytic ring expansion approach to o-fluoronaphthols and o/p-fluorophenols from indanones and 2-cyclopentenones
  作者：Jian Chang、Xiaoning Song、Wanqiao Huang、Dongsheng Zhu、Mang Wang

  DOI：10.1039/c5cc06825h

  日期：——

  A direct method for the synthesis of o-fluoronaphthols and o/p-fluorophenols has been developed by a catalytic ring expansion of indanones and 2-cyclopentenones, in which TMSCF2Br was used as a unique...

  通过茚满酮和2-环戊烯酮的催化扩环，已经开发出一种直接合成邻氟萘酚和邻/对氟苯酚的方法，其中将TMCSF2Br用作独特的...
• [EN] AMINOPYRROLOTRIAZINES AS KINASE INHIBITORS<br/>[FR] AMINOPYRROLOTRIAZINES EN TANT QU'INHIBITEURS DE KINASE
  申请人：BRISTOL MYERS SQUIBB CO

  公开号：WO2019147782A1

  公开（公告）日：2019-08-01

  The disclosure relates to compounds of formula I which are useful as kinase modulators including RIPK1 modulation. The disclosure also provides methods of making and using the compounds for example in treatments related to necrosis or inflammation as well as other indications.

  该公开涉及到公式I的化合物，这些化合物可用作激酶调节剂，包括RIPK1调节。该公开还提供了制备和使用这些化合物的方法，例如在涉及坏死或炎症以及其他适应症的治疗中使用。
• Two-Carbon Ring Expansion of 1-Indanones via Insertion of Ethylene into Carbon–Carbon Bonds
  作者：Ying Xia、Shusuke Ochi、Guangbin Dong

  DOI：10.1021/jacs.9b07445

  日期：2019.8.21

  A rhodium-catalyzed direct insertion of ethylene into a relatively unstrained carbon-carbon bond in 1-indanones is reported, which provides a two-carbon ring-expansion strategy for preparing seven-membered cyclic ketones. As many 1-indanones are commercially available and ethylene is inexpensive, this strategy simplifies synthesis of benzocycloheptenones that are valuable synthetic intermediates for

  据报道，铑催化乙烯直接插入 1-茚满酮中相对无应变的碳-碳键，为制备七元环酮提供了一种双碳扩环策略。由于许多 1-茚满酮可商购获得且乙烯价格低廉，因此该策略简化了苯并环庚烯酮的合成，苯环庚烯酮是生物活性化合物的宝贵合成中间体，但在其他方面制备具有挑战性。此外，该反应无副产物，氧化还原中性，并且可以耐受多种官能团，这可能对制备复杂环状分子的非常规战略键断开产生影响。
• Efficient Entry into 2-Substituted Tetrahydroquinoline Systems through Alkylative Ring Expansion: Stereoselective Formal Synthesis of (±)-Martinellic Acid
  作者：Masafumi Ueda、Sayuri Kawai、Masataka Hayashi、Takeaki Naito、Okiko Miyata

  DOI：10.1021/jo902540x

  日期：2010.2.5

  new efficient synthesis of 2-substituted tetrahydroquinolines has been achieved by the domino reaction of N-indanyl(methoxy)amines, which consists of three types of reactions: elimination of an alcohol, the rearrangement of an aryl group, and the addition of an organolithium or magnesium reagent. The synthetic utility of this approach is demonstrated by the stereoselective formal synthesis of (±)- martinellic

  通过N-茚满基（甲氧基）胺的多米诺反应已实现了一种新的有效的2-取代四氢喹啉合成方法，该反应包括三种类型的反应：消除醇，重整芳基和添加芳基。有机锂或镁试剂。这种方法的合成效用通过（±）-丁二酸的立体选择性形式合成得到证明。

表征谱图