1-甲基-1H-吡唑-4-硼酸 | 847818-55-7

• 物质功能分类: 化学试剂 - 有机试剂 - 硼酸
• 分子结构分类: 有机化合物 - 有机杂环化合物 - 唑类
• 中文名称: 1-甲基-1H-吡唑-4-硼酸
• 中文别名: 1-甲基吡唑-4-硼酸
• 英文名称: (1-methyl-1H-pyrazol-4-yl)boronic acid
• 英文别名: 1-methyl-1H-pyrazole-4-boronic acid；(1-methylpyrazol-4-yl)boronic acid；1-methylpyrazole-4-boronic acid；1-methyl-1H-pyrazol-4-boronic acid；N-methylpyrazole-4-boronic acid
• CAS: 847818-55-7
• 化学式: C₄H₇BN₂O₂
• mdl: MFCD09414709
• 分子量: 125.923
• InChiKey: RYGOBSYXIIUFOR-UHFFFAOYSA-N

物化性质

• 沸点：
  323 ºC
• 密度：
  1.23
• 闪点：
  149 ºC

计算性质

• 辛醇/水分配系数(LogP)：
  -0.09
• 重原子数：
  9
• 可旋转键数：
  1
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.25
• 拓扑面积：
  58.3
• 氢给体数：
  2
• 氢受体数：
  3

安全信息

• 海关编码：
  2933199090
• 危险性防范说明：
  P261,P305+P351+P338
• 危险性描述：
  H315,H319,H335
• 储存条件：
  2～8℃

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : 1-Methyl-1H-Pyrazole-4-Boronic Acid Xhcl
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Label elements
The product does not need to be labelled in accordance with EC directives or respective national laws.
Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

---

SECTION 3: Composition/information on ingredients
Substances
Molecular weight : 162,38 g/mol
No components need to be disclosed according to the applicable regulations.

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
No data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Nature of decomposition products not known.
Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
No data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Avoid
breathing dust.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Storage class (TRGS 510): Non Combustible Solids
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work-place., The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired,
use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour No data available
c) Odour Threshold No data available
d) pH No data available
e) Melting point/freezing No data available
point
f) Initial boiling point and No data available
boiling range
g) Flash point No data available
h) Evaporation rate No data available
i) Flammability (solid, gas) No data available
j) Upper/lower No data available
flammability or
explosive limits
k) Vapour pressure No data available
l) Vapour density No data available
m) Relative density No data available
n) Water solubility No data available
o) Partition coefficient: n- No data available
octanol/water
p) Auto-ignition No data available
temperature
q) Decomposition No data available
temperature
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
Other safety information
No data available

---

SECTION 10: Stability and reactivity
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
No data available
Incompatible materials
No data available
Hazardous decomposition products
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available

---

SECTION 12: Ecological information
Toxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other adverse effects
No data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
No data available

---

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
No data available
Chemical Safety Assessment
For this product a chemical safety assessment was not carried out

---

SECTION 16: Other information
Further information
Copyright 2014 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

制备方法与用途

用途

1-甲基-1H-吡唑-4-硼酸是羧酸类衍生物，用作有机中间体。

制备

1-甲基-1H-吡唑-4-硼酸可通过将1-甲基-4-溴吡唑与硼酸三异丙酯反应制得。

反应信息

• 作为反应物：
  描述：

  1-甲基-1H-吡唑-4-硼酸 生成 7-溴-2-氯喹喔啉
  参考文献：
  名称：

  Organic Process Research and Development. 2010, 14, 849-858

  摘要：

  DOI：
• 作为产物：
  描述：

  1-甲基-4-溴吡唑 在 正丁基锂 、 硼酸三甲酯 、 ammonium chloride 作用下， 以 四氢呋喃 、 正己烷 为溶剂， 反应 2.5h， 以38%的产率得到1-甲基-1H-吡唑-4-硼酸
  参考文献：
  名称：

  1-烷基-1 H-吡唑-5-基和1烷基-1 H-吡唑-4-基硼酸频哪醇酯的合成

  摘要：

  从1 H-吡唑开始，合成并表征了多种1-烷基-1 H-吡唑-4-基和1-烷基-1 H-吡唑-5-基硼酸及其频哪醇酯。所述方法中的关键步骤是吡唑环的区域选择性锂化。合成的松果酸酯在长期保存下是稳定的，可以用作有机合成中的方便试剂。

  DOI：

  10.1002/jhet.5570410612
• 作为试剂：
  描述：

  tert-butyl (1S,2R)-2-(4-chloro-2-(2,4-dimethoxybenzyl)-7-fluoro-3-oxo-2,3-dihydro-1H-pyrrolo[3,4-c]pyridin-6-ylamino)cyclohexylcarbamate 、 1-甲基-1H-吡唑-4-硼酸 在 1-甲基-1H-吡唑-4-硼酸 作用下， 以68的产率得到tert-butyl (1S,2R)-2-(2-(2,4-dimethoxybenzyl)-7-fluoro-4-(1-methyl-1H-pyrazol-4-yl)-3-oxo-2,3-dihydro-1H-pyrrolo[3,4-c]pyridin-6-ylamino)cyclohexylcarbamate
  参考文献：
  名称：

  Bioorg. Med. Chem. Lett. 2016, 26, 5947-5950

  摘要：

  DOI：

文献信息

• [EN] IMIDAZOLE DERIVATIVES USEFUL AS INHIBITORS OF FAAH<br/>[FR] DÉRIVÉS IMIDAZOLE UTILES COMME INHIBITEURS DE LA FAAH
  申请人：MERCK & CO INC

  公开号：WO2009152025A1

  公开（公告）日：2009-12-17

  The present invention is directed to certain imidazole derivatives which are useful as inhibitors of Fatty Acid Amide Hydrolase (FAAH). The invention is also concerned with pharmaceutical formulations comprising these compounds as active ingredients and the use of the compounds and their formulations in the treatment of certain disorders, including osteoarthritis, rheumatoid arthritis, diabetic neuropathy, postherpetic neuralgia, skeletomuscular pain, and fibromyalgia, as well as acute pain, migraine, sleep disorder, Alzeimer Disease, and Parkinson's Disease.

  本发明涉及某些咪唑衍生物，其可用作脂肪酰胺水解酶（FAAH）的抑制剂。该发明还涉及包含这些化合物作为活性成分的药物配方，以及这些化合物及其配方在治疗某些疾病中的使用，包括骨关节炎、类风湿性关节炎、糖尿病性神经病、带状疱疹后神经痛、骨骼肌肉疼痛和纤维肌痛，以及急性疼痛、偏头痛、睡眠障碍、阿尔茨海默病和帕金森病。
• [EN] NOVEL COMPOUNDS AND PHARMACEUTICAL COMPOSITIONS THEREOF FOR THE TREATMENT OF INFLAMMATORY DISORDERS<br/>[FR] NOUVEAUX COMPOSÉS ET COMPOSITIONS PHARMACEUTIQUES LES COMPRENANT POUR LE TRAITEMENT DE TROUBLES INFLAMMATOIRES
  申请人：GALAPAGOS NV

  公开号：WO2017012647A1

  公开（公告）日：2017-01-26

  The present invention discloses compounds according to Formula (I), wherein R1, R3, R4, R5, L1, and Cy are as defined herein. The present invention also provides compounds, methods for the production of said compounds of the invention, pharmaceutical compositions comprising the same and their use in allergic or inflammatory conditions, autoimmune diseases, proliferative diseases, transplantation rejection, diseases involving impairment of cartilage turnover, congenital cartilage malformations, and/or diseases associated with hypersecretion of IL6 and/or interferons. The present invention also methods for the prevention and/or treatment of the aforementioned diseases by administering a compound of the invention.

  本发明公开了根据式（I）的化合物，其中R1、R3、R4、R5、L1和Cy如本文所定义。本发明还提供了该发明的化合物、制备该化合物的方法、包括相同化合物的药物组合物以及它们在过敏或炎症症状、自身免疫疾病、增殖性疾病、移植排斥、涉及软骨周转障碍的疾病、先天软骨畸形和/或与IL6和/或干扰素过度分泌相关的疾病中的使用。本发明还提供了通过给予该发明的化合物来预防和/或治疗上述疾病的方法。
• SUBSTITUTED BRIDGED UREA ANALOGS AS SIRTUIN MODULATORS
  申请人：GLAXOSMITHKLINE LLC

  公开号：US20150152108A1

  公开（公告）日：2015-06-04

  The present invention relates to novel substituted bridged urea compounds, corresponding related analogs, pharmaceutical compositions and methods of use thereof. Sirtuin-modulating compounds of the present invention may be used for increasing the lifespan of a cell, and treating and/or preventing a wide variety of diseases and disorders, which include, but are not limited to, for example, diseases or disorders related to aging or stress, diabetes, obesity, neurodegenerative diseases, cardiovascular disease, blood clotting disorders, inflammation, cancer, and/or flushing as well as diseases or disorders that would benefit from increased mitochondrial activity. The present invention also related to compositions comprising a sirtuin-modulating compound in combination with another therapeutic agent.

  本发明涉及新型取代桥式脲化合物，相应的相关类似物，药物组合物以及其使用方法。本发明的抑制素调节化合物可用于延长细胞寿命，并治疗和/或预防各种疾病和疾病，包括但不限于与衰老或压力、糖尿病、肥胖、神经退行性疾病、心血管疾病、血液凝块疾病、炎症、癌症和/或潮红有关的疾病或疾病，以及那些会受益于增加线粒体活性的疾病或疾病。本发明还涉及包含抑制素调节化合物与另一治疗剂组合的组合物。
• [EN] SUBSTITUTED BRIDGED UREA ANALOGS AS SIRTUIN MODULATORS<br/>[FR] ANALOGUES D'URÉE PONTÉS SUBSTITUÉS EN TANT QUE MODULATEURS DE SIRTUINE
  申请人：GLAXOSMITHKLINE IP NO 2 LTD

  公开号：WO2016079709A1

  公开（公告）日：2016-05-26

  The present invention relates to novel substituted bridged urea analog compounds of Formula (I) or pharmaceutically acceptable salts thereof, corresponding pharmaceutical compositions, processes for making and use of such compounds, alone or in combination with other therapeutic agents, as Sirtuin Modulators useful for increasing lifespan of a cell, and for use in treating and/or preventing a wide variety of diseases and disorders, which include, but are not limited to, for example, diseases or disorders related to aging or stress, diabetes, obesity, neurodegenerative diseases, cardiovascular disease, blood clotting disorders, inflammation, cancer, and/or flushing as well as diseases or disorders that would benefit from increased mitochondrial activity.

  本发明涉及一种新型的取代桥式脲类似物化合物，其化学式为（I）或其药学上可接受的盐，相应的药物组合物，制备这种化合物的方法以及单独使用或与其他治疗剂联合使用的这些化合物作为Sirtuin调节剂，可用于增加细胞寿命，并用于治疗和/或预防各种疾病和紊乱，包括但不限于与衰老或压力、糖尿病、肥胖、神经退行性疾病、心血管疾病、血液凝块紊乱、炎症、癌症和/或潮红有关的疾病或紊乱，以及那些会受益于增加线粒体活性的疾病或紊乱。
• COMPOUNDS AND COMPOSITIONS FOR MODULATING EGFR MUTANT KINASE ACTIVITIES
  申请人：Yuhan Corporation

  公开号：US20160102076A1

  公开（公告）日：2016-04-14

  The present invention provides a new group of protein kinase inhibitors, aminopyrimidine derivatives, and pharmaceutically acceptable salts thereof that are useful for treating cell proliferative disease and disorder such as cancer and immune disease. The present invention provides methods for synthesizing and administering the protein kinase inhibitor compounds. The present invention also provides pharmaceutical formulations comprising at least one of the protein kinase inhibitor compounds together with a pharmaceutically acceptable carrier, diluent or excipient therefore. The invention also provides useful intermediates generated during the syntheses of the aminopyrimidine derivatives.

  本发明提供了一类新的蛋白激酶抑制剂，氨基嘧啶衍生物及其药用可接受的盐，用于治疗细胞增殖性疾病和紊乱，如癌症和免疫疾病。本发明提供了合成和给药蛋白激酶抑制剂化合物的方法。本发明还提供了包含至少一种蛋白激酶抑制剂化合物的药物配方，以及药用可接受的载体、稀释剂或辅料。该发明还提供了在合成氨基嘧啶衍生物过程中产生的有用中间体。