2,2-dimesitylvinyl methyl ether | 162897-19-0

• 分子结构分类: 有机化合物 - 脂质和类脂质分子 - 异戊烯醇脂质
• 英文名称: 2,2-dimesitylvinyl methyl ether
• 英文别名: (2,2-dimesityl-vinyl)-methyl ether；Methyl-[2.2-bis-(2.4.6-trimethyl-phenyl)-vinyl]-aether；2-Methoxy-1.1-bis-(2.4.6-trimethyl-phenyl)-aethylen；(2,2-Dimesityl-vinyl)-methyl-aether；2-Methoxy-1.1-dimesityl-aethylen；2-[2-Methoxy-1-(2,4,6-trimethylphenyl)ethenyl]-1,3,5-trimethylbenzene
• CAS: 162897-19-0
• 化学式: C₂₁H₂₆O
• 分子量: 294.437
• InChiKey: VUPCLRUTWIHWDZ-UHFFFAOYSA-N

计算性质

• 辛醇/水分配系数(LogP)：
  6.4
• 重原子数：
  22
• 可旋转键数：
  3
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.33
• 拓扑面积：
  9.2
• 氢给体数：
  0
• 氢受体数：
  1

反应信息

• 作为反应物：
  描述：

  2,2-dimesitylvinyl methyl ether 、 氢碘酸 、 溶剂黄146 生成 2,4,6,2',4',6'-hexamethyl-trans-stilbene
  参考文献：
  名称：

  Simplified Model for the Operation of Chilled Water Cooling Coils Under Nonnominal Conditions

  摘要：

  This study presents a cooling coil model for calculating energy consumption in air-conditioned buildings that has a minimal number of inputs. The model accurately determines the cooling energy rate and dehumidification energy rate tinder nonnominal conditions, and takes into account operation tinder variable air and water flows. In this manner, the model enhances the simplified ASHRAE Toolkit model without requiring more input data. The main assumptions are justified considering the common existing configurations of cooling coils in the air-conditioning industry. The parameters of the model are identified from only one nominal rating point. The model has been validated on a VAV facility with an average deviation of 5% for total energy rate. Errors are mainly due to the assumption that the coil is either completely wet or dry even if the surface is partially wet.

  DOI：

  10.1080/10789669.2002.10391433
• 作为产物：
  描述：

  opt.-inakt. Hydromesitoin 在 盐酸 作用下， 生成 2,2-dimesitylvinyl methyl ether
  参考文献：
  名称：

  Simplified Model for the Operation of Chilled Water Cooling Coils Under Nonnominal Conditions

  摘要：

  This study presents a cooling coil model for calculating energy consumption in air-conditioned buildings that has a minimal number of inputs. The model accurately determines the cooling energy rate and dehumidification energy rate tinder nonnominal conditions, and takes into account operation tinder variable air and water flows. In this manner, the model enhances the simplified ASHRAE Toolkit model without requiring more input data. The main assumptions are justified considering the common existing configurations of cooling coils in the air-conditioning industry. The parameters of the model are identified from only one nominal rating point. The model has been validated on a VAV facility with an average deviation of 5% for total energy rate. Errors are mainly due to the assumption that the coil is either completely wet or dry even if the surface is partially wet.

  DOI：

  10.1080/10789669.2002.10391433

文献信息

• Frey, Joseph; Eventova, Irina; Rappoport, Zvi, Journal of the Chemical Society. Perkin transactions II, 1995, # 3, p. 621 - 638
  作者：Frey, Joseph、Eventova, Irina、Rappoport, Zvi、Mueller, Thomas、Takai, Yoshio、Sawada, Masami

  DOI：——

  日期：——
• Simplified Model for the Operation of Chilled Water Cooling Coils Under Nonnominal Conditions
  作者：O. Morisot、D. Marchio、P. Stabat

  DOI：10.1080/10789669.2002.10391433

  日期：2002.4.1

  This study presents a cooling coil model for calculating energy consumption in air-conditioned buildings that has a minimal number of inputs. The model accurately determines the cooling energy rate and dehumidification energy rate tinder nonnominal conditions, and takes into account operation tinder variable air and water flows. In this manner, the model enhances the simplified ASHRAE Toolkit model without requiring more input data. The main assumptions are justified considering the common existing configurations of cooling coils in the air-conditioning industry. The parameters of the model are identified from only one nominal rating point. The model has been validated on a VAV facility with an average deviation of 5% for total energy rate. Errors are mainly due to the assumption that the coil is either completely wet or dry even if the surface is partially wet.