6-甲氧基-2-吡啶甲腈 | 83621-01-6

• 分子结构分类: 有机化合物 - 有机氧化合物
• 中文名称: 6-甲氧基-2-吡啶甲腈
• 中文别名: 2-氰基-6-甲氧基吡啶；6-甲氧基吡啶-2-甲腈
• 英文名称: 6-methoxypicolinonitrile
• 英文别名: 2-cyano-6-methoxypyridine；6-methoxy-2-pyridinecarbonitrile；6-methoxypyridine-2-carbonitrile
• CAS: 83621-01-6
• 化学式: C₇H₆N₂O
• 分子量: 134.137
• InChiKey: LTSUUWWSGRKYFO-UHFFFAOYSA-N

物化性质

• 熔点：
  62-67°C
• 沸点：
  115-120 °C(Press: 19 Torr)
• 密度：
  1.16±0.1 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  1.2
• 重原子数：
  10
• 可旋转键数：
  1
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.14
• 拓扑面积：
  45.9
• 氢给体数：
  0
• 氢受体数：
  3

安全信息

• 海关编码：
  2933399090
• 危险标志：
  GHS05,GHS06
• 危险性描述：
  H301,H312,H315,H318,H332,H335
• 危险性防范说明：
  P261,P280,P301 + P310,P305 + P351 + P338
• 储存条件：
  | 室温 干燥 |

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : 6-Methoxy-2-pyridinecarbonitrile
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No. : 83621-01-6
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Inhalation (Category 4), H332
Acute toxicity, Dermal (Category 4), H312
Acute toxicity, Oral (Category 3), H301
Skin irritation (Category 2), H315
Serious eye damage (Category 1), H318
Specific target organ toxicity - single exposure (Category 3), H335
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Xn Harmful R20/21/22, R37/38, R41
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal word Danger
Hazard statement(s)
H301 Toxic if swallowed.
H312 Harmful in contact with skin.
H315 Causes skin irritation.
H318 Causes serious eye damage.
H332 Harmful if inhaled.
H335 May cause respiratory irritation.
Precautionary statement(s)
P261 Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
P280 Wear protective gloves/ eye protection/ face protection.
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/
physician.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazard none
Statements
Other hazards - none

---

SECTION 3: Composition/information on ingredients
Substances
Synonyms : 2-Cyano-6-methoxypyridine
Formula : C7H6N2O
Molecular Weight : 134,14 g/mol
CAS-No. : 83621-01-6
Hazardous ingredients according to Regulation (EC) No 1272/2008
Component Classification Concentration
6-Methoxy-2-pyridinecarbonitrile
Acute Tox. 4; Acute Tox. 3; -
Skin Irrit. 2; Eye Dam. 1;
STOT SE 3; H301, H312,
H315, H318, H332, H335
Hazardous ingredients according to Directive 1999/45/EC
Component Classification Concentration
6-Methoxy-2-pyridinecarbonitrile
Xn, R20/21/22 - R37/38 - R41 -
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, nitrogen oxides (NOx)
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Wear respiratory protection. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
protection.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Specific end use(s)
A part from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling
the product.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
respirator type N100 (US) or type P3 (EN 143) respirator cartridges as a backup to engineering
controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
respirators and components tested and approved under appropriate government standards such
as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
Colour: white
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing Melting point/range: 62 - 67 °C
point
f) Initial boiling point and 115 - 120 °C at 25 hPa
boiling range
g) Flash point no data available
h) Evapouration rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density no data available
n) Water solubility no data available
o) Partition coefficient: n- log Pow: 0,842
octanol/water
p) Auto-ignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
Prolonged or repeated exposure may cause allergic reactions in certain sensitive individuals. The
preceding data, or interpretation of data, was determined using Quantitative Structure Activity Relationship
(QSAR) modeling.
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
Inhalation - May cause respiratory irritation.
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

---

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
professional waste disposal service to dispose of this material. Dissolve or mix the material with a
combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: 3439 IMDG: 3439 IATA: 3439
UN proper shipping name
ADR/RID: NITRILES, TOXIC, SOLID, N.O.S. (6-Methoxy-2-pyridinecarbonitrile)
IMDG: NITRILES, TOXIC, SOLID, N.O.S. (6-Methoxy-2-pyridinecarbonitrile)
IATA: Nitriles, solid, toxic, n.o.s. (6-Methoxy-2-pyridinecarbonitrile)
Transport hazard class(es)
ADR/RID: 6.1 IMDG: 6.1 IATA: 6.1
Packaging group
ADR/RID: III IMDG: III IATA: III
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
no data available

---

---

SECTION 15 - REGULATORY INFORMATION
N/A

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  6-甲氧基-2-吡啶甲腈 在 三甲基氯硅烷 、 sodium iodide 作用下， 以 乙腈 为溶剂， 以82%的产率得到6-羟基-吡啶-2-甲腈
  参考文献：
  名称：

  腈自由基环化合成杂芳烃

  摘要：

  一种利用级联自由基环化合成四环氮杂芳烃的新方法已被开发出来。关键步骤涉及五元外乙烯基自由基环化到腈类上，生成中间的亚氨基自由基，这些自由基进一步环化到芳环上。抗癌生物碱喜树碱、马普辛和诺塔波地汀A和B的环A-D就是通过这个方法合成的。

  DOI：

  10.1055/s-2001-14592
• 作为产物：
  描述：

  6-甲氧基吡啶-2-羧胺 在 三乙胺 、 三氟乙酸酐 作用下， 以 四氢呋喃 为溶剂， 以95%的产率得到6-甲氧基-2-吡啶甲腈
  参考文献：
  名称：

  [EN] DERIVATIVES OF 6,7-DIHYDRO-5H-IMIDAZO[1,2-α]IMIDAZOLE-3- CARBOXYLIC ACID AMIDES
  [FR] DÉRIVÉS D'AMIDES DE L'ACIDE 6,7-DIHYDRO-5H-IMIDAZO[1,2-&Agr;]IMIDAZOLE-3-CARBOXYLIQUE

  摘要：

  公开号：

  WO2009070485A8

文献信息

• [EN] IMIDAZOTRIAZINONE COMPOUNDS<br/>[FR] COMPOSÉS IMIDAZOTRIAZINONES
  申请人：ENVIVO PHARMACEUTICALS INC

  公开号：WO2012040230A1

  公开（公告）日：2012-03-29

  The present invention provides imidazotriazinone compounds which are inhibitors of phosphodiesterase 9. The present invention further provides processes, pharmaceutical compositions, pharmaceutical preparations and pharmaceutical use of the compounds in the treatment of PDE9 associated diseases or disorders in mammals, including CNS or neurodegeneration disorder.

  本发明提供了嘧啶三唑酮类化合物，这些化合物是磷酸二酯酶9的抑制剂。本发明还提供了在治疗哺乳动物中PDE9相关疾病或紊乱，包括中枢神经系统或神经退行性疾病中使用这些化合物的方法、药物组合物、药物制剂和药物用途。
• Mild Palladium-Catalyzed Cyanation of (Hetero)aryl Halides and Triflates in Aqueous Media
  作者：Daniel T. Cohen、Stephen L. Buchwald

  DOI：10.1021/ol5032359

  日期：2015.1.16

  A mild, efficient, and low-temperature palladium-catalyzed cyanation of (hetero)aryl halides and triflates is reported. Previous palladium-catalyzed cyanations of (hetero)aryl halides have required higher temperatures to achieve good catalytic activity. This current reaction allows the cyanation of a general scope of (hetero)aryl halides and triflates at 2–5 mol % catalyst loadings with temperatures

  据报道，轻度，有效和低温钯催化的（杂）芳基卤化物和三氟甲磺酸酯的氰化反应。先前钯催化的（杂）芳基卤化物的氰化需要更高的温度以实现良好的催化活性。该当前反应可以使一般范围的（杂）芳基卤化物和三氟甲磺酸酯在催化剂负载量为2％至5％的条件下从rt到40°C进行氰化。这种温和的方法适用于逆转录酶抑制剂lersivirine的合成。
• [EN] NOVEL TETRAHYDROPYRIDOPYRIMIDINES AND TETRAHYDROPYRIDOPYRIDINES FOR THE TREATMENT AND PROPHYLAXIS OF HEPATITIS B VIRUS INFECTION<br/>[FR] NOUVELLES TÉTRAHYDROPYRIDOPYRIMIDINES ET TÉTRAHYDROPYRIDOPYRIDINES POUR LE TRAITEMENT ET LA PRÉVENTION D'UNE INFECTION PAR LE VIRUS DE L'HÉPATITE B
  申请人：HOFFMANN LA ROCHE

  公开号：WO2016107832A1

  公开（公告）日：2016-07-07

  The invention provides novel compounds having the general formula (I): wherein R1, R2, R3, Q, U,W, Z, X and Y are as described herein, compositions including the compounds and methods of using the compounds. These compounds are HbsAg inhibitors and are useful as medicaments for the treatment or prophylaxis of HBV infection.

  这项发明提供了具有一般式（I）的新化合物：其中R1、R2、R3、Q、U、W、Z、X和Y如本文所述，包括这些化合物的组合物以及使用这些化合物的方法。这些化合物是HbsAg抑制剂，可用作治疗或预防HBV感染的药物。
• [EN] IMIDAZOTRIAZINONE COMPOUNDS<br/>[FR] COMPOSÉS D'IMIDAZOTRIAZINONE
  申请人：ENVIVO PHARMACEUTICALS INC

  公开号：WO2013142269A1

  公开（公告）日：2013-09-26

  The present invention provides imidazotriazinone compounds which are inhibitors of phosphodiesterase 9 and pharmaceutically acceptable salt thereof. The present invention further provides processes, pharmaceutical compositions, pharmaceutical preparations and pharmaceutical use of the compounds in the treatment of PDE9 associated diseases or disorders in mammals, including humans.

  本发明提供了咪唑三唑酮化合物，它们是磷酸二酯酶9的抑制剂及其药用盐。本发明还提供了用于治疗哺乳动物，包括人类，PDE9相关疾病或疾病的过程、药物组成、药物制剂和化合物的药用。
• 1,3-BENZOTHIAZINONE DERIVATIVES AND USE THEREOF
  申请人：Takeda Chemical Industries, Ltd.

  公开号：EP1424336A1

  公开（公告）日：2004-06-02

  This invention provides a compound represented by the formula (I) : wherein R1 is a hydrogen atom, a halogen atom, hydroxy, nitro, optionally halogenated alkyl, alkoxy optionally having substituents, acyl or amino optionally having substituents; R2 is pyridyl, furyl, thienyl, pyrrolyl, quinolyl, pyrazinyl, pyrimidinyl, pyridazinyl, indolyl, tetrahydroquinolyl or thiazolyl, each of which may have substituents; n is 1 or 2; or a salt. And this invention provides a safe pharmaceutical comprising the compound of the formula (I) , which has an excellent apoptosis inhibitory effect and MIF binding effect, for preventing and/or treating heart disease, nervous degenerative disease, cerebrovascular disease, central nervous infectious disease, traumatorathy, demyelinating disease, bone and articular disease, kidney disease, liver disease, osteomyelodysplasia, AIDS, cancer, and the like.

  这项发明提供了一种由以下式（I）表示的化合物： 其中R1是氢原子、卤素原子、羟基、硝基、可选择具有卤素取代基的烷基、可选择具有取代基的烷氧基、酰基或氨基； R2是吡啶基、呋喃基、噻吩基、吡咯基、喹啉基、吡嗪基、嘧啶基、吡啶并嘧啶基、吲哚基、四氢喹啉基或噻唑基，每种基团可能具有取代基； n为1或2；或其盐。该发明提供了一种安全的药物，包括具有优异的凋亡抑制作用和MIF结合作用的式（I）化合物，用于预防和/或治疗心脏病、神经退行性疾病、脑血管疾病、中枢神经感染性疾病、创伤病变、脱髓鞘疾病、骨骼和关节疾病、肾脏疾病、肝脏疾病、骨髓发育不良、艾滋病、癌症等。