DL-高苯丙氨酸甲酯盐酸盐 | 85808-33-9

• 物质功能分类: 生物化工 - 氨基酸及其衍生物 - 苯丙氨酸类衍生物
• 分子结构分类: 有机化合物 - 有机酸及其衍生物 - 羧酸及其衍生物
• 中文名称: DL-高苯丙氨酸甲酯盐酸盐
• 中文别名: 环丙沙星；适普灵
• 英文名称: D,L-homophenylalanine methyl ester hydrochloride
• 英文别名: 2-amino-4-phenylbutyric acid methylester hydrochloride；(1-methoxy-1-oxo-4-phenylbutan-2-yl)azanium;chloride
• CAS: 85808-33-9
• 化学式: C₁₁H₁₅NO₂*ClH
• 分子量: 229.707
• InChiKey: PZKOPSSMUBBHMM-UHFFFAOYSA-N

物化性质

• 熔点：
  153-154 °C

计算性质

• 辛醇/水分配系数(LogP)：
  1.54
• 重原子数：
  15
• 可旋转键数：
  5
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.36
• 拓扑面积：
  52.3
• 氢给体数：
  2
• 氢受体数：
  3

安全信息

• 海关编码：
  2922499990

SDS

Material Safety Data Sheet

---

Section 1. Identification of the substance
Product Name: DL-Homophenylalanine methyl ester HCl
Synonyms:

---

Section 2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.

---

Section 3. Composition/information on ingredients.
Ingredient name: DL-Homophenylalanine methyl ester HCl
CAS number: 85808-33-9

---

Section 4. First aid measures
Skin contact: Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact: Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion: Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

---

Section 5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

---

Section 6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution: Wear approved mask/respirator
Hand precaution: Wear suitable gloves/gauntlets
Skin protection: Wear suitable protective clothing
Eye protection: Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

---

Section 7. Handling and storage
Handling: This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Store in closed vessels.
Storage:

---

Section 8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

---

Section 9. Physical and chemical properties
Appearance: Not specified
Boiling point: No data
No data
Melting point:
Flash point: No data
Density: No data
Molecular formula: C11H15NO2.ClH
Molecular weight: 229.7

---

Section 10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, hydrogen chloride.

---

Section 11. Toxicological information
No data.

---

Section 12. Ecological information
No data.

---

Section 13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

---

Section 14. Transportation information
Non-harzardous for air and ground transportation.

---

Section 15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  DL-高苯丙氨酸甲酯盐酸盐 在 盐酸 作用下， 生成 DL-高苯丙氨酸
  参考文献：
  名称：

  氨基酸的新合成-II 1：用乙醛酸衍生物的烯烃酰胺烷基化

  摘要：

  描述了由烯烃和乙醛酸-伯酰胺加合物合成亮氨酸，天冬氨酸，天冬氨酸半醛和不饱和N-酰基-α氨基酸的新方法。还讨论了中间体恶嗪7和α-酰胺基丁内酯8的化学和立体化学

  DOI：

  10.1016/0040-4020(77)88018-6
• 作为产物：
  描述：

  2-((tert-butoxycarbonyl)amino)-4-phenylbutanoic acid 在 氯化亚砜 作用下， 以 甲醇 、 异丙醚 为溶剂， 以85%的产率得到DL-高苯丙氨酸甲酯盐酸盐
  参考文献：
  名称：

  Sulfonamide derivative as a matrix metalloproteinase inhibitor

  摘要：

  本发明提供了一种新型磺胺衍生物的一般式(I)，其作为基质金属蛋白酶（MMP）抑制剂，其异构体，药用盐及其制备方法。由于本发明的磺胺衍生物在体外选择性地抑制MMP活性，包含磺胺衍生物作为有效成分的MMP抑制剂可以实际应用于预防和治疗由MMP过度表达和过活化引起的各种疾病。

  公开号：

  US20020169314A1

文献信息

• Synthesis of α-Aryl Esters and Nitriles: Deaminative Coupling of α-Aminoesters and α-Aminoacetonitriles with Arylboronic Acids
  作者：Guojiao Wu、Yifan Deng、Chaoqiang Wu、Yan Zhang、Jianbo Wang

  DOI：10.1002/anie.201406765

  日期：2014.9.22

  Transition‐metal‐free synthesis of α‐aryl esters and nitriles using arylboronic acids with α‐aminoesters and α‐aminoacetonitriles, respectively, as the starting materials has been developed. The reaction represents a rare case of converting C(sp3)N bonds into C(sp3)C(sp2) bonds. The reaction conditions are mild, demonstrate good functional‐group tolerance, and can be scaled up.

  已开发出分别使用芳基硼酸与α-氨基酯和α-氨基乙腈作为原料的无过渡金属合成α-芳基酯和腈的方法。该反应代表了将C（sp 3）N键转换为C（sp 3）C（sp 2）键的罕见情况。反应条件温和，表现出良好的官能团耐受性，并且可以扩大规模。
• Discovery of a series of ester-substituted NLRP3 inflammasome inhibitors
  作者：David Harrison、Nicolas Boutard、Krzysztof Brzozka、Marta Bugaj、Stefan Chmielewski、Anna Cierpich、John R. Doedens、Charles-Henry R.Y. Fabritius、Christopher A. Gabel、Michal Galezowski、Piotr Kowalczyk、Oleksandr Levenets、Magdalena Mroczkowska、Katarzyna Palica、Roderick A. Porter、David Schultz、Marta Sowinska、Grzegorz Topolnicki、Piotr Urbanski、Jakub Woyciechowski、Alan P. Watt

  DOI：10.1016/j.bmcl.2020.127560

  日期：2020.12

  the NLRP3 inflammasome have been approved. In this work, we used the known NLRP3 inflammasome inhibitor CP-456,773 (aka CRID3 or MCC 950) as our starting point and undertook a Structure-Activity Relationship (SAR) analysis and subsequent scaffold-hopping exercise. This resulted in the rational design of a series of novel ester-substituted urea compounds that are highly potent and selective NLRP3 inflammasome

  NLRP3 炎症小体是先天免疫系统的一个组成部分，参与促炎细胞因子的产生。各种外源性和内源性信号的异常激活可导致慢性、低度炎症。由于与大量未满足医疗需求的疾病有关，如阿尔茨海默病、帕金森病、关节炎和癌症，它作为药物靶点引起了极大的兴趣。迄今为止，尚未批准专门针对抑制 NLRP3 炎症小体的药物。在这项工作中，我们使用已知的 NLRP3 炎症小体抑制剂 CP-456,773（又名 CRID3 或 MCC 950）作为我们的起点，并进行了结构-活性关系 (SAR) 分析和随后的支架跳跃练习。44和45。据推测，酯部分充当高渗透性的递送载体，随后被羧酸酯酶水解为羧酸活性物质。这些分子与最先进的技术有很大不同，并在治疗 NLRP3 驱动的疾病方面提供了潜力，特别是在需要组织穿透的情况下。
• 一种脂肪胺脱氨后二氟烷基化的方法
  申请人：遵义医科大学

  公开号：CN111892489B

  公开（公告）日：2022-11-18

  本申请公开了有机合成领域中的一种脂肪胺脱氨后二氟烷基化的方法，具体地说，该方法由简单易得的式A脂肪胺为原料，在加热或室温条件下，与式B四氟硼酸吡喃盐反应，得到式C烷基吡啶盐；随后在光照条件下，选用商业易得的[Ir(dtbbpy)(ppy)2]PF6为催化剂，二氟烯醇硅醚D为二氟烷基化试剂，高收率地得到多种二氟烷基取代的烷烃和环烷烃及其衍生物。该方法操作简便、反应条件简单、温和、具有优异的官能团兼容性，适合较大规模的生产合成。通过该催化合成方法可获得具有潜在应用价值的含氟氨基酸，且所得的产物通过进一步的转化，可以很容易地获得各种结构新颖，在医药、农药和材料领域具有重要意义的含二氟烷基的化合物。
• Novel method of treatment of inflammatory skin conditions
  申请人：Chandler Rupert Stephen

  公开号：US20070049518A1

  公开（公告）日：2007-03-01

  There is provided, inter alia, a method for the treatment or prevention of an inflammatory skin condition which is characterised by colonisation with Staphylococcus aureus , comprising the topical administration of an aureolysin inhibitor.

  提供了一种治疗或预防由金黄色葡萄球菌定植引起的炎症性皮肤病的方法，包括局部施用一种金黄色葡萄球菌溶素抑制剂。
• Non-proteinogenic amino acid synthesis. The β-anion derived from aspartic acid, and its application to α-amino acid synthesis.
  作者：Jack E. Baldwin、Mark G. Moloney、Michael North

  DOI：10.1016/s0040-4020(01)85140-1

  日期：1989.1

  -Z-(S)-aspartate (2) with lithium amide bases generates the corresponding β-ester enolate, which can be alkylated with suitable electrophiles. The application of this strategy for synthesis of optically active amino acids has been investigated.

  用酰胺化锂碱处理α-丁基β-甲基-Z-（S）-天门冬氨酸（2）生成相应的β-酯烯醇盐，可以用合适的亲电试剂进行烷基化。已经研究了该策略在光学活性氨基酸合成中的应用。