摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

3,7-diethyl-5-methylidenenonane-3,7-diol | 142052-56-0

中文名称
——
中文别名
——
英文名称
3,7-diethyl-5-methylidenenonane-3,7-diol
英文别名
——
3,7-diethyl-5-methylidenenonane-3,7-diol化学式
CAS
142052-56-0
化学式
C14H28O2
mdl
——
分子量
228.375
InChiKey
COQKRRJYTPYJSF-UHFFFAOYSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

计算性质

  • 辛醇/水分配系数(LogP):
    3.8
  • 重原子数:
    16
  • 可旋转键数:
    8
  • 环数:
    0.0
  • sp3杂化的碳原子比例:
    0.86
  • 拓扑面积:
    40.5
  • 氢给体数:
    2
  • 氢受体数:
    2

反应信息

  • 作为反应物:
    描述:
    3,7-diethyl-5-methylidenenonane-3,7-diol盐酸 作用下, 以 乙醚 为溶剂, 反应 24.0h, 以75%的产率得到2,2,6,6-Tetraethyl-4-methyldihydropyran
    参考文献:
    名称:
    Naphthalene-catalysed lithiation of 3-chloro-2-chloromethylpropene in a Barbier-type process with carbonyl compounds
    摘要:
    The reaction of 3-chloro-2-chloromethylpropene (1) and carbonyl compounds (2) with an excess of lithium powder in the presence of a catalytic amount of naphthalene (6%) in tetrahydrofuran at -78 to 20-degrees-C leads, after hydrolysis, to the corresponding methylenic 1,5-diols 3 in a Barbier-type process. The treatment of the crude diols 3 with 12 M hydrochloric acid affords selectively the corresponding substituted dihydropyrans 6.
    DOI:
    10.1016/s0040-4020(01)89923-3
  • 作为产物:
    描述:
    3-氯-2-氯甲基丙烯3-戊酮lithium 作用下, 以 四氢呋喃 为溶剂, 反应 8.0h, 生成 3,7-diethyl-5-methylidenenonane-3,7-diol
    参考文献:
    名称:
    Synthesis of Substituted 1,6-Dioxaspiro[3.4]octanes from 3-Chloro-2-(chloromethyl)prop-1-ene
    摘要:
    在对称取代的酮存在下,3-氯-2-(氯甲基)丙-1-烯在萘催化下发生石化作用,生成相应的甲烯基均烯丙基二醇,在二噁烷/水中用碘和氧化银(I)处理后,生成一系列 1,6-二氧杂螺[3.4]辛烷。这些化合物是存在于一些天然化合物(如克莱门汀和亚茴香素)中的结构单元。
    DOI:
    10.1055/s-2000-6289
点击查看最新优质反应信息

文献信息

  • New Trimethylenemethane Dianion Synthons: Application to the Preparation of Substituted Perhydrofuro[2,3-b]furans
    作者:Emilio Lorenzo、Francisco Alonso、Miguel Yus
    DOI:10.1016/s0040-4020(00)00060-0
    日期:2000.3
    The reaction of 3-chloro-2-(chloromethyl)prop-1-ene (1) with lithium powder and a catalytic amount of naphthalene in the presence of different electrophiles in THF at −78°C yields products 2. When carbonylic compounds are used as electrophiles the corresponding methylenic diols are obtained, which by tandem hydroboration–oxidation with alkaline hydrogen peroxide and treatment with PCC (for ketone derivatives)
    3-氯-2-(氯甲基)丙-1-烯(1)与锂粉和催化量的萘在不同亲电试剂存在下于-78°C在THF中反应,生成产物2。当将羰基化合物用作亲电子试剂时,会获得相应的亚甲基二醇,这是通过碱式过氧化氢的串联硼氢化-氧化并用PCC(对于酮衍生物)或(Ph 3 P)3 RuCl 2(对于醛衍生物)处理提供的。过氢呋喃呋喃3。使用2-氯甲基-3-(2-甲氧基乙氧基)丙-1-烯(4)作为原料,在上述条件下,选择性的氯/锂交换相对于烯丙基碳-氧键裂解使引入的第一个亲电试剂在-78至-30°C的温度下引入,第二个亲电试剂在-30°C的温度下引入室温下给予产品5。当应用于二醇5时,上述相同的氧化方案会导致不同取代的全氢呋喃呋喃7。
  • Polymer supported arene-catalysed lithiation reactions
    作者:Cecilia Gómez、Sonia Ruiz、Miguel Yus
    DOI:10.1016/s0040-4020(99)00330-0
    日期:1999.5
    The reaction of functionalised mono or dichlorinated materials 1a–6a with an excess of lithium and a catalytic amount of a naphthalene (PN) or biphenyl (PB) supported polymer (eassily prepared by radical copolymerisation of 2-vinylnaphthalene or 4-vinylbiphenyl with vinylbenzene and divinylbenzene) in THF either in the presence or not of different electrophiles [Me3SiCl, iPrCHO, PhCHO, Et2CO, (CH2)4CO
    官能化的单或二氯化材料的反应1A-6A与过量锂和萘的催化量(P Ñ)或联苯(P乙支持)聚合物(由2-乙烯基萘或4-乙烯基联苯与自由基共聚eassily制备THF中存在或不存在不同的亲电试剂[Me 3 SiCl,i PrCHO,PhCHO,Et 2 CO,(CH 2)4 CO,(CH 2)5 CO,(c -C 3 H 5))2 CO,i Pr 2用水水解后,在−78或−50°C的温度下,CO,PhCOMe,PhCHnNPh]会产生预期的功能化产物1ca-6ck。聚合物催化剂被定量回收并且可以重复使用几次而没有任何活性损失。
  • Polymer supported naphthalene-catalysed lithiation reactions
    作者:Cecilia Gómez、Sonia Ruiz、Miguel Yus
    DOI:10.1016/s0040-4039(97)10774-2
    日期:1998.3
    The reaction of functionalised mono or dichlorinated materials 1a–6a with an excess of lithium and a catalytic amount of a naphthalene supported polymer (P-152, easily prepared by radical copolymerisation of 2-vinylnaphthalene, styrene and divinylbenzene) in THF either in the presence (Barbier-type conditions) or not of different electrophiles [Me3SiCl, BunCHO, BuiCHO, PhCHO, Et2CO, c(C3H5)2CO, Pri2CO
    在存在下,功能化的单氯化或二氯化材料1a-6a与过量的锂和催化量的萘负载的聚合物(P-152,可通过2-乙烯基萘,苯乙烯和二乙烯基苯的自由基共聚反应轻松制备)进行反应(巴尔比埃型条件)或不不同的亲电子的[我3的SiCl,卜ñ CHO,卜我CHO,苯甲醛,等2 CO,ç(C 3 H ^ 5)2 CO,镨我2 CO,(CH 2)4一氧化碳(CH 2)5水解后,CO,PhCOMe,PhCH = NPh]产生预期的产物1c-6c。催化剂被定量回收并且可以重复使用几次而不会损失其活性。
  • Straightforward Synthesis of Perhydrofuro[2,3-<i>b</i>]furans through a Wacker-Type Reaction
    作者:Francisco Alonso、Daniel Sánchez、Tatiana Soler、Miguel Yus
    DOI:10.1002/adsc.200800339
    日期:2008.9.5
    An efficient synthesis of substituted perhydrofuro[2,3-b]furans has been accomplished from readily accesible 3-methylidene-1,5-diols based on an intramolecular acetalisation under Wacker-type reaction conditions.
    在Wacker型反应条件下,基于分子内缩醛化反应,由容易获得的3-亚甲基-1,5-二醇可以有效地合成取代的全氢呋喃[2,3- b ]呋喃。
  • Naphthalene-catalysed lithiation of 3-chloro-2-chloromethyl-propene: A barbier-type practical alternative to the trimethylenemethane dianion
    作者:Diego J. Ramón、Miguel Yus
    DOI:10.1016/0040-4039(92)88181-4
    日期:1992.4
    The reaction of equimolar amounts of 3-chloro-2-chloromethylpropene (2) and a carbonyl compound (3) with an excess of lithium powder and a catalytic amount (6%) of naphthalene in tetrahydrofuran at −78°C leads, after hydrolysis with water, to the corresponding diols 4 in a Barbier-type process.
    水解后,等摩尔量的3-氯-2-氯甲基丙烯(2)和羰基化合物(3)与过量的锂粉和催化量的萘(6%)在四氢呋喃中的反应在-78℃下反应与水一起以Barbier型方法得到相应的二醇4。
查看更多