Material Safety Data Sheet Section 1. Identification of the substance 3-Chloro-2-methoxypyridine-4-boronic acid Product Name: Synonyms: 3-Chloro-2-methoxy-4-pyridineboronic acid; 3-Chloro-2-methoxypyridin-4-ylboronic acid Section 2. Hazards identification Harmful by inhalation, in contact with skin, and if swallowed. H315: Causes skin irritation H319: Causes serious eye irritation H335: May cause respiratory irritation P261: Avoid breathing dust/fume/gas/mist/vapours/spray Wear protective gloves/protective clothing/eye protection/face protection P280: P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present and easy to do – continue rinsing P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing P405: Store locked up Section 3. Composition/information on ingredients. 3-Chloro-2-methoxypyridine-4-boronic acid Ingredient name: CAS number: 957060-88-7 Section 4. First aid measures Immediately wash skin with copious amounts of water for at least 15 minutes while removing Skin contact: contaminated clothing and shoes. If irritation persists, seek medical attention. Eye contact: Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical attention. Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention. Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention. Ingestion: Section 5. Fire fighting measures In the event of a fire involving this material, alone or in combination with other materials, use dry powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus should be worn. Section 6. Accidental release measures Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national standards. Respiratory precaution: Wear approved mask/respirator Hand precaution: Wear suitable gloves/gauntlets Skin protection: Wear suitable protective clothing Eye protection: Wear suitable eye protection Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container for disposal. See section 12. Environmental precautions: Do not allow material to enter drains or water courses. Section 7. Handling and storage Handling: This product should be handled only by, or under the close supervision of, those properly qualified in the handling and use of potentially hazardous chemicals, who should take into account the fire, health and chemical hazard data given on this sheet. Store in closed vessels, under −20◦C. Storage: Section 8. Exposure Controls / Personal protection Engineering Controls: Use only in a chemical fume hood. Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles. General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse. Section 9. Physical and chemical properties Not specified Appearance: Boiling point: No data Melting point: No data Flash point: No data Density: No data Molecular formula: C6H7BClNO3 Molecular weight: 187.4 Section 10. Stability and reactivity Conditions to avoid: Heat, flames and sparks. Materials to avoid: Oxidizing agents. Possible hazardous combustion products: Carbon monoxide, nitrogen oxides, hydrogen chloride. Section 11. Toxicological information No data. Section 12. Ecological information No data. Section 13. Disposal consideration Arrange disposal as special waste, by licensed disposal company, in consultation with local waste disposal authority, in accordance with national and regional regulations. Section 14. Transportation information Non-harzardous for air and ground transportation. Section 15. Regulatory information No chemicals in this material are subject to the reporting requirements of SARA Title III, Section 302, or have known CAS numbers that exceed the threshold reporting levels established by SARA Title III, Section 313.
[EN] PYRIDINE OR PYRIMIDINE DERIVATIVE AND PREPARATION METHOD THEREFOR AND USE THEREOF [FR] DÉRIVÉ DE PYRIDINE OU DE PYRIMIDINE, SON PROCÉDÉ DE PRÉPARATION ET SON UTILISATION [ZH] 吡啶或嘧啶类衍生物及其制备方法和用途
Alkyl−(Hetero)Aryl Bond Formation via Decarboxylative Cross-Coupling: A Systematic Analysis
作者:Frederik Sandfort、Matthew J. O'Neill、Josep Cornella、Laurin Wimmer、Phil S. Baran
DOI:10.1002/anie.201612314
日期:2017.3.13
useful surrogates for alkylhalides in cross‐coupling chemistry. Such esters are easily accessible through reactions between ubiquitous carboxylic acids and coupling agents widely used in amide bond formation. This article features an amalgamation of in‐house experience bolstered by approximately 200 systematically designed experiments to accelerate the selection of ideal reaction conditions and activating
Compounds of the formula I:
or pharmaceutically acceptable salts thereof,
wherein R
1
, R
2
, R
3
and R
4
are as defined herein. Also disclosed are methods of making the compounds and using the compounds for treatment of diseases associated with calcium release-activated calcium channels (CRAC).
Fused Pyridine, Pyrimidine and Triazine Compounds as Cell Cycle Inhibitors
申请人:Connors Richard V.
公开号:US20110142796A1
公开(公告)日:2011-06-16
Compounds, pharmaceutical compositions and methods are provided that are useful in the treatment of CDK4-mediated disorders, such as cancer. The subject compounds are fused pyridine, pyrimide and triazine derivatives.
This invention relates to novel 3-aminopyridines of the formula
wherein B
1
, B
2
and R
1
to R
6
are as defined in the description and in the claims, as well as pharmaceutically acceptable salts thereof. These compounds are GPBAR1 agonists and can be used as medicaments for the treatment of diseases such as type II diabetes.
Compounds of the present invention, and pharmaceutically acceptable compositions thereof, are useful as modulators of ATP-Binding Cassette (“ABC”) transporters or fragments thereof, including Cystic Fibrosis Transmembrane Conductance Regulator (“CFTR”). The present invention also relates to methods of treating CFTR mediated diseases using compounds of the present invention.