摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

[2-(3,5-二甲基苯氧基)乙基]胺 | 26646-46-8

中文名称
[2-(3,5-二甲基苯氧基)乙基]胺
中文别名
2-(3,5-二甲基苯氧基)乙胺盐酸盐;[2-(3,5-二甲基苯氧基)乙基]胺盐酸盐
英文名称
2-(3,5-dimethylphenoxy)ethylamine
英文别名
1-Amino-2-(3,5-dimethylphenoxy)aethan;2-(3,5-Dimethylphenoxy)ethanamine
[2-(3,5-二甲基苯氧基)乙基]胺化学式
CAS
26646-46-8
化学式
C10H15NO
mdl
MFCD04061702
分子量
165.235
InChiKey
ZNNZYMKIVDOTPM-UHFFFAOYSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

计算性质

  • 辛醇/水分配系数(LogP):
    1.7
  • 重原子数:
    12
  • 可旋转键数:
    3
  • 环数:
    1.0
  • sp3杂化的碳原子比例:
    0.4
  • 拓扑面积:
    35.2
  • 氢给体数:
    1
  • 氢受体数:
    2

安全信息

  • 危险等级:
    IRRITANT
  • 危险品标志:
    Xi
  • 海关编码:
    2922299090

SDS

SDS:44f80b032bcfef634e1c1a3f82bbf16b
查看

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : 2-(3,5-Dimethylphenoxy)Ethanamine
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances



SECTION 2: Hazards identification
Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Label elements
The product does not need to be labelled in accordance with EC directives or respective national laws.
Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

SECTION 3: Composition/information on ingredients
Substances
Molecular weight : 165,24 g/mol
No components need to be disclosed according to the applicable regulations.

SECTION 4: First aid measures
Description of first aid measures
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration.
In case of skin contact
Wash off with soap and plenty of water.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
No data available

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Nature of decomposition products not known.
Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
No data available

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Avoid dust formation. Avoid breathing vapours, mist or gas.
For personal protection see section 8.
Environmental precautions
No special environmental precautions required.
Methods and materials for containment and cleaning up
Sweep up and shovel. Keep in suitable, closed containers for disposal.
Reference to other sections
For disposal see section 13.

SECTION 7: Handling and storage
Precautions for safe handling
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Storage class (TRGS 510): Non Combustible Solids
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
General industrial hygiene practice.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work-place., The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired,
use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
No special environmental precautions required.

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour No data available
c) Odour Threshold No data available
d) pH No data available
e) Melting point/freezing No data available
point
f) Initial boiling point and No data available
boiling range
g) Flash point No data available
h) Evaporation rate No data available
i) Flammability (solid, gas) No data available
j) Upper/lower No data available
flammability or
explosive limits
k) Vapour pressure No data available
l) Vapour density No data available
m) Relative density No data available
n) Water solubility No data available
o) Partition coefficient: n- No data available
octanol/water
p) Auto-ignition No data available
temperature
q) Decomposition No data available
temperature
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
Other safety information
No data available

SECTION 10: Stability and reactivity
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
No data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
In the event of fire: see section 5

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

SECTION 12: Ecological information
Toxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other adverse effects
No data available

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
No data available

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
No data available
Chemical Safety Assessment
For this product a chemical safety assessment was not carried out

SECTION 16: Other information
Further information
Copyright 2014 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

上下游信息

  • 上游原料
    中文名称 英文名称 CAS号 化学式 分子量
  • 下游产品
    中文名称 英文名称 CAS号 化学式 分子量

反应信息

  • 作为反应物:
    描述:
    [2-(3,5-二甲基苯氧基)乙基]胺 在 sodium tetrahydroborate 、 potassium carbonate三氯氧磷 作用下, 以 甲醇乙醇丙酮乙腈 为溶剂, 反应 9.0h, 生成 methyl (2E)-3-[{2-[2-(1-methoxyethyl)-3,5-dimethylphenoxy]ethyl}methylamino]acrylate
    参考文献:
    名称:
    Transformations of tetrahydro-1,4-benzoxazepines and tetrahydro-1,4-benzothiazepines under the action of alkynes. First example of the synthesis of tetrahydro-1,4-benzothiazonine-6-carboxylate
    摘要:
    It was shown that 2,3,4,5-tetrahydro-1,4-benzoxazepines were cleaved at the N-C(5) bond under the action of activated alkynes in methanol, forming o-(methoxyethyl)- and o-(methoxybenzyl)-phenyl(aminoethyl) ethers. The cleavage rate depended on the electronic effects of the substituents at the C-5 atom. Thiazepine ring expansion in tetrahydro-1,4-benzothiazepine was achieved for the first time via reaction with methyl propiolate to give a benzothiazonine.
    DOI:
    10.1007/s10593-013-1251-z
  • 作为产物:
    描述:
    参考文献:
    名称:
    新型吡咯烷-2,4-二酮衍生物的设计,合成,晶体结构和除草活性
    摘要:
    为了发现具有新型分子支架的绿色除草剂,使用天然四酸作为先导化合物来设计和合成四种结合了链状烷氧基烷基部分(4a–4d)和十九种吡咯烷-2,4-的吡咯烷-2,4-二酮衍生物。通过取代,酰化,环化和酸化反应掺入取代的苯氧乙基部分(10a-10s)的二酮衍生物。通过FT-IR,1 H NMR,13 C NMR和HRMS光谱分析确认了合成的目标化合物。化合物10a的单晶结构X-射线衍射分析表明,1-羟基亚乙烯基通过具有Z-构型的双键连接吡咯烷杂环的第三位置。通过培养皿培养法,以bar草(Echinochloa crus-galli)和油菜(Brassica campestris)为模型植物来评价除草活性。发现大多数目标化合物在100μgmL -1时对植物生长具有中等至良好的抑制活性。其中,化合物10q和10n对草和油菜幼苗的根系表现出最高的除草活性,相应的抑制率分别为65.6%和84.0%。该结果
    DOI:
    10.1039/d1nj00119a
点击查看最新优质反应信息

文献信息

  • Goldenberg; Wandestrick; Binon, Chimica therapeutica, 1973, vol. 8, # 3, p. 259 - 270
    作者:Goldenberg、Wandestrick、Binon、Charlier
    DOI:——
    日期:——
  • N-(aryloxyalkyl)-N'-(amino-alkyl) ureas
    申请人:A.H. ROBINS COMPANY, INCORPORATED
    公开号:EP0066987B1
    公开(公告)日:1986-08-27
  • FLUORINATED AROMATIC BIS(ACYL)-CONTAINING COMPOUNDS AND POLYESTERS PREPARED THEREFROM
    申请人:3M INNOVATIVE PROPERTIES COMPANY
    公开号:US20140163250A1
    公开(公告)日:2014-06-12
    A fluorinated bis(acyl-containing compound and a fluorinated polyester formed from the fluorinated diacyl are described. More particularly, the fluorinated diacyl has an aromatic ring bonded to two acyl groups plus at least one third group that contains a perfluoroalkylsulfonamido group. The fluorinated polyesters formed from the fluorinated diacyl-containing compound can be used to provide a low energy surface with a relatively low refractive index compared to many other polyesters.
  • ANIONIC EXCHANGE-HYDROPHOBIC MIXED MODE CHROMATOGRAPHY RESINS
    申请人:BIO-RAD LABORATORIES, INC.
    公开号:US20210069692A1
    公开(公告)日:2021-03-11
    Chromatography resins having anionic exchange-hydrophobic mixed mode ligands and methods of using such resins are provided.
  • US9045400B2
    申请人:——
    公开号:US9045400B2
    公开(公告)日:2015-06-02
查看更多