摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

1-(苯基(哌啶-1-基)甲基)萘-2-醇 | 6278-04-2

中文名称
1-(苯基(哌啶-1-基)甲基)萘-2-醇
中文别名
——
英文名称
1-[phenyl(piperidin-1-yl)methyl]naphthalen-2-ol
英文别名
1-(phenyl-1-piperidylmethyl)-2-naphthol;1-(phenyl(piperidine-1-yl)methyl)naphthalen-2-ol;1-[Phenyl(piperidino)methyl]-2-naphthol
1-(苯基(哌啶-1-基)甲基)萘-2-醇化学式
CAS
6278-04-2
化学式
C22H23NO
mdl
——
分子量
317.431
InChiKey
RJMSVDFLOXQKOO-UHFFFAOYSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

计算性质

  • 辛醇/水分配系数(LogP):
    5.2
  • 重原子数:
    24
  • 可旋转键数:
    3
  • 环数:
    4.0
  • sp3杂化的碳原子比例:
    0.27
  • 拓扑面积:
    23.5
  • 氢给体数:
    1
  • 氢受体数:
    2

SDS

SDS:6276639c11de980895e9b64ec2fb138f
查看

上下游信息

  • 上游原料
    中文名称 英文名称 CAS号 化学式 分子量
  • 下游产品
    中文名称 英文名称 CAS号 化学式 分子量

反应信息

  • 作为反应物:
    描述:
    1-(苯基(哌啶-1-基)甲基)萘-2-醇叔丁基过氧化氢sodium dodecyl-sulfate 、 copper(II) acetate monohydrate 作用下, 反应 3.0h, 以60%的产率得到(2-羟基-1-萘基)苯基甲酮
    参考文献:
    名称:
    贝蒂碱的铜催化氧化脱氨:萘酚和苯酚的苯甲酰化/甲酰化的有效方法
    摘要:
    通过Betti碱的氧化脱氨作用,铜催化的萘酚和苯酚的苯甲酰化/甲酰化。
    DOI:
    10.1039/c6ra04567g
  • 作为产物:
    描述:
    1-(三甲基硅基)哌啶 在 lithium perchlorate 作用下, 以 乙醚 为溶剂, 反应 1.5h, 生成 1-(苯基(哌啶-1-基)甲基)萘-2-醇
    参考文献:
    名称:
    Lithium perchlorate assisted one-pot three-component aminoalkylation of electron-rich aromatic compounds
    摘要:
    A one-pot. three-component. Mannich reaction of electron-rich aromatic compounds with in situ prepared iminium salts in 5 M ethereal lithium perchlorate gives good yields of aminoalkylated products at room temperature. (C) 2001 Elsevier Science Ltd. All rights reserved.
    DOI:
    10.1016/s0040-4039(01)01732-4
  • 作为试剂:
    描述:
    在 potassium dichromate 、 sodium dithionite 、 硫酸四丁基溴化铵 、 palladium diacetate 、 sodium hydroxide 、 1-(苯基(哌啶-1-基)甲基)萘-2-醇过氧化苯甲酰 作用下, 以 四氢呋喃N,N-二甲基乙酰胺硝基苯甲苯 为溶剂, 反应 37.8h, 生成 9,10-dimethoxy[7]helicene
    参考文献:
    名称:
    使用二苯乙烯光环化脱氢的改进方案快速合成螺旋
    摘要:
    已开发出一种用于合成菲和螺旋烯的二苯乙烯光脱氢环化的改进程序。该过程涉及使用 THF 作为碘介导的光脱氢环化过程中产生的氢碘酸的清除剂。由于与环氧丙烷相比,THF的沸点更高、成本更低且易于获得,因此使用THF是有利的。该方法用于合成多种菲和螺旋。
    DOI:
    10.3998/ark.5550190.0012.902
点击查看最新优质反应信息

文献信息

  • Betti Base as an Efficient Ligand for Copper-Catalyzed Ullmann Coupling of Phenol with Aryl Halides
    作者:Li Yang、Qichao Yang、Jianxin Shi、Yufang Wang、Mingjie Zhang
    DOI:10.1080/00397911.2014.903421
    日期:2014.9.2
    Abstract A simple, general, and highly efficient Betti base ligand has been developed for copper-catalyzed Ullmann coupling of phenol with aryl halides without the protection of an inert atmosphere. The reaction proceeds smoothly in the presence of K2CO3 as the base and dimethylsulfoxide as the solvent. The catalyst was reused several times with no evident loss of catalytic activity and is environmentally
    摘要 已开发出一种简单、通用且高效的 Betti 碱配体,用于铜催化苯酚与芳基卤化物的 Ullmann 偶联,无需惰性气氛保护。以碳酸钾为碱,二甲亚砜为溶剂,反应顺利进行。该催化剂重复使用多次,催化活性无明显损失,对环境无害。图形概要
  • Facile synthesis of aminoalkyl naphthols and single crystal X-ray, computational studies on 1-[morpholino(thiophen-2-yl)methyl]naphthalen-2-ol
    作者:C.P. Surya、G. Harichandran、S. Muthu
    DOI:10.1016/j.molstruc.2021.130861
    日期:2021.10
    An efficient, eco-friendly protocol is developed for the synthesis of 1- (α-aminoalkyl)-2-naphthol derivatives via one-pot three-component reaction of 2-naphthol, aromatic aldehydes and piperidine or morpholine in the presence of Amberlite IRA-400 Cl resin as a catalyst. This approach carries characteristics of one-pot synthesis, high yield, and mild, clean reaction conditions with the recyclable catalyst
    开发了一种高效、环保的协议,用于在 Amberlite IRA 存在下,通过 2-萘酚、芳香醛和哌啶或吗啉的一锅三组分反应合成 1-(α-氨基烷基)-2-萘酚衍生物-400 Cl树脂作催化剂。该方法具有一锅法合成、收率高、反应条件温和、清洁的特点,催化剂可回收利用。得到其中一种产物(4p),在具有 P32 空间群的三角晶系中结晶,并与流行的密度泛函理论(DFT)、B3LYP/6-311++G(d,p) 基组的理论计算进行比较. 计算了最高占据分子轨道(HOMO)和最低未占据分子轨道(LUMO)的能量。所有理论计算与实验值一致。
  • C-C bond cleavage: Metal-free-catalyzed reaction of Betti bases with various heterocycles under microwave irradiation
    作者:Mohit L. Deb、B.-Shriya Saikia、Kongkona Borah、Pranjal K. Baruah
    DOI:10.1080/00397911.2016.1239740
    日期:2016.12.1
    ABSTRACT The reaction of Betti bases with various heterocycles in the presence of p-toluenesulphonic acid (PTSA) under microwave irradiation gives bis(heterocycle)methanes through benzyl transfer. The reaction proceeds via the cleavage of C-N bond followed by C-C bond. The metal-free cleavage of C-C bond, which is in fact a C-dearylation, is rarely reported in the literature. GRAPHICAL ABSTRACT
    摘要 Betti 碱与各种杂环在对甲苯磺酸 (PTSA) 存在下在微波辐射下反应,通过苄基转移得到双(杂环)甲烷。反应通过先切断 CN 键,然后切断 CC 键进行。CC 键的无金属裂解,实际上是 C-脱芳基化,在文献中很少报道。图形概要
  • Antibacterial activity of Mannich bases derived from 2-naphthols, aromatic aldehydes and secondary aliphatic amines
    作者:Gheorghe Roman、Valentin Năstasă、Andra-Cristina Bostănaru、Mihai Mareş
    DOI:10.1016/j.bmcl.2016.03.098
    日期:2016.5
    A small library of 1-aminoalkyl 2-naphthols has been synthesized through the direct Mannich reaction of 2-naphthols with (hetero)aromatic aldehydes and secondary amines. All of the Mannich bases having a thiophen-2-yl ring in their structure had good activity against Gram-positive bacteria, irrespective of the nature of the amino moiety.
    通过2-萘酚与(杂)芳族醛和仲胺的直接Mannich反应合成了一个小的1-氨基烷基2-萘酚文库。所有结构中具有噻吩-2-基环的曼尼希碱基均对革兰氏阳性细菌具有良好的活性,而与氨基部分的性质无关。
  • Synthesis of 1‐aminoalkyl‐2‐naphthols derivatives using an engineered copper‐based nanomagnetic catalyst (Fe <sub>3</sub> O <sub>4</sub> @CQD@Si (OEt)(CH <sub>2</sub> ) <sub>3</sub> NH@CC@N <sub>3</sub> @phenylacetylene@Cu)
    作者:Tahereh Akbarpour、Ardeshir Khazaei、Jaber Yousefi Seyf、Negin Sarmasti
    DOI:10.1002/aoc.6361
    日期:2021.10
    present study, a molecular level engineered-based method was used to synthesis a copper-based nanomagnetic catalyst (Fe3O4@CQD@Si (OEt)(CH2)3NH@CC@N3@phenylacetylene@Cu). The as-synthesized catalyst was characterized using different techniques, including infrared (IR), X-ray powder diffraction (XRD), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM), energy-dispersive
    在本研究中,基于分子水平的工程化方法用于合成铜基纳米磁性催化剂(Fe 3 O 4 @CQD@Si (OEt)(CH 2 ) 3 NH@CC@N 3 @苯基乙炔@Cu) . 使用不同的技术对合成的催化剂进行表征,包括红外(IR)、X 射线粉末衍射(XRD)、场发射扫描电子显微镜(FESEM)和透射电子显微镜(TEM)、能量色散 X 射线光谱( EDX) 和 EDX 元素映射、感应耦合等离子体 (ICP)、热重分析 (TGA) 和差热分析 (DTA) 以及振动样品磁强计 (VSM)。Fe 3 O 4使用碳量子点 (CQD) 代替传统的 SiO 2保护纳米粒子表面. 在 1-氨基烷基-2-萘酚衍生物的合成中评估了所合成催化剂的活性。反应时间短、反应收率高的无溶剂条件是所制备催化剂的结果。反应如何被催化剂触发由 IR 确定。合成后的催化剂在五个循环后提供了 87.5% 的反应产率。采用傅里叶变换红外
查看更多