N-(2-甲氧基-苯基)-甲酰胺 | 23896-88-0

• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 中文名称: N-(2-甲氧基-苯基)-甲酰胺
• 英文名称: formic acid o-anisidide
• 英文别名: N-(2-methoxyphenyl)formamide；N-(2-Methoxy-phenyl)-formamide
• CAS: 23896-88-0
• 化学式: C₈H₉NO₂
• 分子量: 151.165
• InChiKey: HTFKHRVOHMLBQC-UHFFFAOYSA-N

物化性质

• 熔点：
  84 °C
• 沸点：
  328.7±25.0 °C(Predicted)
• 密度：
  1.160±0.06 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  1.1
• 重原子数：
  11
• 可旋转键数：
  2
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.12
• 拓扑面积：
  38.3
• 氢给体数：
  1
• 氢受体数：
  2

安全信息

• 海关编码：
  2924299090

SDS

---

Section 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE
Product identifiers
Product name : 2-Methoxyformanilide
CAS-No. : 23896-88-0
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

Section 2. HAZARDS IDENTIFICATION
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008 [EU-GHS/CLP]
Acute toxicity, Oral (Category 4)
Eye irritation (Category 2)
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Harmful if swallowed.
Label elements
Labelling according Regulation (EC) No 1272/2008 [CLP]
Pictogram
Signal word Warning
Hazard statement(s)
H302 Harmful if swallowed.
H319 Causes serious eye irritation.
Precautionary statement(s)
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazard none
Statements
According to European Directive 67/548/EEC as amended.
Hazard symbol(s)
R-phrase(s)
R22 Harmful if swallowed.
S-phrase(s) none
Other hazards - none

---

Section 3. COMPOSITION/INFORMATION ON INGREDIENTS
Substances
Formula : C8H9NO2
Molecular Weight : 151,16 g/mol
Component Concentration
2-Methoxyformanilide
CAS-No. 23896-88-0 -

---

Section 4. FIRST AID MEASURES
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Indication of any immediate medical attention and special treatment needed
no data available

---

Section 5. FIREFIGHTING MEASURES
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, nitrogen oxides (NOx)
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

Section 6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapors, mist or gas. Ensure
adequate ventilation. Avoid breathing dust.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

Section 7. HANDLING AND STORAGE
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
protection.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Specific end uses
no data available

---

Section 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher
level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges.
Use respirators and components tested and approved under appropriate government standards
such as NIOSH (US) or CEN (EU).

---

Section 9. PHYSICAL AND CHEMICAL PROPERTIES
Information on basic physical and chemical properties
a) Appearance Form: solid
Colour: dark brown
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing no data available
point
f) Initial boiling point and no data available
boiling range
g) Flash point no data available
h) Evaporation rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density no data available
n) Water solubility no data available
o) Partition coefficient: n- log Pow: 1,244
octanol/water
p) Autoignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

Section 10. STABILITY AND REACTIVITY
Reactivity
no data available
Chemical stability
no data available
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available

---

Section 11. TOXICOLOGICAL INFORMATION
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitization
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Potential health effects
Inhalation
May be harmful if inhaled. May cause respiratory tract irritation.
Ingestion Harmful if swallowed.
Skin May be harmful if absorbed through skin. May cause skin irritation.
Eyes Causes eye irritation.
Signs and Symptoms of Exposure
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.
Additional Information
RTECS: Not available

---

Section 12. ECOLOGICAL INFORMATION
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
no data available
Other adverse effects
no data available

---

Section 13. DISPOSAL CONSIDERATIONS
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
professional waste disposal service to dispose of this material. Dissolve or mix the material with a
combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

Section 14. TRANSPORT INFORMATION
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
no data available

---

---

SECTION 15 - REGULATORY INFORMATION
N/A

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  N-(2-甲氧基-苯基)-甲酰胺 在 盐酸 、 甲醇 、 sodium hydroxide 、 sodium methylate 作用下， 生成 2-甲氨基苯酚
  参考文献：
  名称：

  Diepolder, Chemische Berichte, 1899, vol. 32, p. 3525

  摘要：

  DOI：
• 作为产物：
  描述：

  2-甲氧基-N-甲基苯胺 在 2,2,6,6-四甲基哌啶氧化物 、 氧气 、 copper(II) acetate monohydrate 作用下， 以 乙腈 为溶剂， 100.0 ℃ 、101.33 kPa 条件下， 反应 16.0h， 以72%的产率得到N-(2-甲氧基-苯基)-甲酰胺
  参考文献：
  名称：

  铜催化级联 N-脱烷基化/N-甲基氧化芳胺的 TEMPO 和氧气作为氧化剂

  摘要：

  已开发出用于合成 N-苯基甲酰胺的新型叔胺串联 N-脱烷基化和 N-甲基氧化。这种方法也可以从相应的仲 N-甲基芳胺生产相同的产品。

  DOI：

  10.1002/ejoc.202101178

文献信息

• Tetracoordinate borates as catalysts for reductive formylation of amines with carbon dioxide
  作者：Xiaolin Jiang、Zijun Huang、Mohamed Makha、Chen-Xia Du、Dongmei Zhao、Fang Wang、Yuehui Li

  DOI：10.1039/d0gc01741h

  日期：——

  We report sodium trihydroxyaryl borates as the first robust tetracoordinate organoboron catalysts for reductive functionalization of CO2. These catalysts, easily synthesized from condensing boronic acids with metal hydroxides, activate main group element–hydrogen (E–H) bonds efficiently. In contrast to BX3 type boranes, boronic acids and metal-BAr4 salts, under transition metal-free conditions, sodium

  我们报告三羟基芳基硼酸钠作为第一个坚固的四配位有机硼催化剂，用于CO 2的还原功能化。这些催化剂很容易从硼酸与金属氢氧化物的缩合反应中合成，可以有效地活化主族元素氢键。与BX 3型硼烷，硼酸和金属-BAr 4盐相比，在无过渡金属的条件下，三羟基芳基硼酸钠对各种胺（包括带有官能团的胺）表现出较高的还原性N-甲酰化反应性（106例）例如酯，烯烃，羟基，氰基，硝基，卤素，MeS–，醚基等。催化具有挑战性的吡啶胺的甲酰化反应的性能过高，为使用传统的甲酰化试剂提供了一种有前途的替代方法。机理研究支持将静电相互作用作为Si / B–H活化的关键，从而使碱金属硼酸盐成为用于CO 2加氢硼化，加氢硅烷化和还原甲酰化/甲基化的通用催化剂。
• [EN] SUBSTITUTED QUINOLINE CCR5 RECEPTOR ANTAGONISTS<br/>[FR] ANTAGONISTES DU RECEPTEUR CCR5 A BASE DE QUINOLEINE SUBSTITUES
  申请人：SCHERING AG

  公开号：WO2004002960A1

  公开（公告）日：2004-01-08

  The present invention relates to CCR5 receptor antagonists of formulae (1a) or (1b), enantiomers, diastereomers, salts and solvates thereof wherein R1, R2, R3, R4, R5, and R7 are as defined herein. The invention further includes a method of CCR5-mediated disorders employing such compounds.

  本发明涉及式（1a）或（1b）的CCR5受体拮抗剂，其对映体、二对映体、盐和溶剂合物，其中R1、R2、R3、R4、R5和R7如本文所定义。该发明还包括一种利用这些化合物治疗CCR5介导的疾病的方法。
• One-pot selective <i>N</i>-formylation of nitroarenes to formamides catalyzed by core–shell structured cobalt nanoparticles
  作者：Xiaosu Dong、Zhaozhan Wang、Yanan Duan、Yong Yang

  DOI：10.1039/c8cc05285a

  日期：——

  A first heterogeneous non-noble cobalt catalyst for one-pot direct N-formylation of nitroarenes exhibiting high activity with a broad substrate scope under mild conditions is synthesised. It is easily separated with good recyclability.

  一种首个非均质非贵金属钴催化剂被合成，用于一锅法直接对硝基芳烃进行高活性的N-甲酰化，在温和条件下具有广泛的底物适用范围。该催化剂易于分离，并具有良好的可循环利用性。
• Solvent- and catalyst-free <i>N</i>-formylations of amines at ambient condition: Exploring the usability of aromatic formates as <i>N</i>-formylating agents
  作者：Shaikh Batuta、Naznin Ara Begum

  DOI：10.1080/00397911.2016.1255334

  日期：2017.1.17

  and catalyst-free N-formylation protocol has been developed for amines (1s–21s) where aromatic formates (1r–6r) were used as the N-formylating agents. The amine substrates include both primary and secondary aromatic amines (1s–19s) as well as aliphatic amine (20s) and a primary amide (21s). Structures of both the aromatic formate and amine components strongly influenced the rate of the reaction and yield

  摘要 已经为胺（1s-21s）开发了一种无溶剂和无催化剂的 N-甲酰化方案，其中芳族甲酸酯（1r-6r）用作 N-甲酰化剂。胺底物包括伯胺和仲芳香胺 (1s–19s) 以及脂肪胺 (20s) 和伯酰胺 (21s)。芳族甲酸酯和胺组分的结构强烈影响反应速率和 N-甲酰胺产物的产率。反应条件温和，易于操作。该协议可以在环境条件下顺利完成，并提供高产率的甲酰胺产品。此外，本方法不能应用于硫醇基团 (22s) 的甲酰化。这表明它可能用于在硫醇官能团存在下对胺进行化学选择性 N-甲酰化。图形概要
• Hydrophosphination of CO₂and Subsequent Formate Transfer in the 1,3,2-Diazaphospholene-Catalyzed<i>N</i>-Formylation of Amines
  作者：Che Chang Chong、Rei Kinjo

  DOI：10.1002/anie.201505244

  日期：2015.10.5

  Hydrophosphination of CO2 with 1,3,2‐Diazaphospholene (NHP‐H; 1) afforded phosphorus formate (NHP‐OCOH; 2) through the formation of a bond between the electrophilic phosphorus atom in 1 and the oxygen atom from CO2, along with hydride transfer to the carbon atom of CO2. Transfer of the formate from 2 to Ph2SiH2 produced Ph2Si(OCHO)2 (3) in a reaction that could be carried out in a catalytic manner

  通过1,3,2-二氮杂膦烯（NHP-H; 1）对CO 2进行氢磷酸化，通过1中的亲电磷原子与CO 2中的氧原子之间的键形成甲酸磷（NHP-OCOH; 2），与氢化物一起转移到CO 2的碳原子上。将甲酸酯从2转移到Ph 2 SiH 2可以在反应中生成Ph 2 Si（OCHO）2（3），该反应可以通过使用5 mol％的1进行催化。这些基本反应用于在环境条件下在一锅中用CO 2对胺衍生物进行无金属催化的N-甲酰化反应。

表征谱图