(6-甲氧基-2-吡啶基)氨基甲酸叔丁酯 | 855784-40-6

• 分子结构分类: 有机化合物 - 有机氧化合物
• 中文名称: (6-甲氧基-2-吡啶基)氨基甲酸叔丁酯
• 中文别名: (6-甲氧基-吡啶-2-基)-氨基甲酸叔丁酯
• 英文名称: tert-Butyl (6-methoxypyridin-2-yl)carbamate
• 英文别名: tert-butyl N-(6-methoxypyridin-2-yl)carbamate
• CAS: 855784-40-6
• 化学式: C₁₁H₁₆N₂O₃
• 分子量: 224.26
• InChiKey: BDYLIANVYQWWNB-UHFFFAOYSA-N

物化性质

• 沸点：
  275.3±25.0 °C(Predicted)
• 密度：
  1.146±0.06 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  2.1
• 重原子数：
  16
• 可旋转键数：
  4
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.45
• 拓扑面积：
  60.4
• 氢给体数：
  1
• 氢受体数：
  4

安全信息

• 危险等级：
  IRRITANT
• 危险品标志：
  Xi
• 海关编码：
  2933399090
• WGK Germany：
  3
• 危险标志：
  GHS07
• 危险性描述：
  H302,H319
• 危险性防范说明：
  P305 + P351 + P338

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : (6-Methoxy-Pyridin-2-Yl)-Carbamic Acid Tert-Butyl
Ester
: ADE000349
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral (Category 4), H302
Eye irritation (Category 2), H319
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Xn Harmful R22, R36
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal word Warning
Hazard statement(s)
Harmful if swallowed.
Causes serious eye irritation.
Precautionary statement(s)
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazard none
Statements
Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

---

SECTION 3: Composition/information on ingredients
Substances
Molecular weight : 224,26 g/mol
Hazardous ingredients according to Regulation (EC) No 1272/2008
Component Classification Concentration
(6-Methoxy-Pyridin-2-Yl)-Carbamic Acid Tert-Butyl Ester
Acute Tox. 4; Eye Irrit. 2; <= 100 %
H302, H319
Hazardous ingredients according to Directive 1999/45/EC
Component Classification Concentration
(6-Methoxy-Pyridin-2-Yl)-Carbamic Acid Tert-Butyl Ester
Xn, R22 - R36 <= 100 %
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
No data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Nature of decomposition products not known.
Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
No data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Storage class (TRGS 510): Non Combustible Solids
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher
level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges.
Use respirators and components tested and approved under appropriate government standards
such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour No data available
c) Odour Threshold No data available
d) pH No data available
e) Melting point/freezing No data available
point
f) Initial boiling point and No data available
boiling range
g) Flash point No data available
h) Evaporation rate No data available
i) Flammability (solid, gas) No data available
j) Upper/lower No data available
flammability or
explosive limits
k) Vapour pressure No data available
l) Vapour density No data available
m) Relative density No data available
n) Water solubility No data available
o) Partition coefficient: n- No data available
octanol/water
p) Auto-ignition No data available
temperature
q) Decomposition No data available
temperature
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
Other safety information
No data available

---

SECTION 10: Stability and reactivity
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
No data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

---

SECTION 12: Ecological information
Toxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other adverse effects
No data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
No data available

---

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
No data available
Chemical Safety Assessment
R22 Harmful if swallowed.
R36 Irritating to eyes.
Further information
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  (6-甲氧基-2-吡啶基)氨基甲酸叔丁酯 在 水 、 caesium carbonate 、 O-(benzotriazol-1-yl)-N,N,N',N'-tetramethyluronium tetrafluoroborate 、 N,N-二异丙基乙胺 、 lithium hydroxide 作用下， 以 四氢呋喃 、 N,N-二甲基甲酰胺 为溶剂， 反应 4.0h， 生成
  参考文献：
  名称：

  [EN] SKELETAL MUSCLE DELIVERY PLATFORMS AND METHODS OF USE
  [FR] PLATEFORMES D'ADMINISTRATION À DES MUSCLES SQUELETTIQUES ET MÉTHODES D'UTILISATION

  摘要：

  本公开涉及将有效载荷有针对性地且高效地引导至体内骨骼肌细胞的传递平台。所述传递平台包括靶向配体（例如具有亲和力的化合物，包括α-v-β-6整合素）和药代动力学/药效学（PK/PD）调节剂，以促进有效载荷传递到细胞，包括骨骼肌细胞。适用于本公开的传递平台的有效载荷包括RNAi剂，可以链接或结合到传递平台上，在体内传递时，可以抑制骨骼肌细胞的基因表达。还描述了包括骨骼肌细胞传递平台的药物组合物，以及用于治疗各种疾病和疾病的方法，其中传递治疗有效载荷至骨骼肌细胞是可取的。

  公开号：

  WO2022056269A1
• 作为产物：
  描述：

  2-氯-6-甲氧基吡啶 、 氨基甲酸叔丁酯 在 palladium diacetate 、 caesium carbonate 、 2-二环己基磷-2,4,6-三异丙基联苯 作用下， 以 1,4-二氧六环 为溶剂， 反应 24.0h， 以48%的产率得到(6-甲氧基-2-吡啶基)氨基甲酸叔丁酯
  参考文献：
  名称：

  Pd-catalyzed amidation of aryl(Het) halides with tert-butyl carbamate

  摘要：

  Pd-catalyzed cross-coupling reaction of tert-butyl carbamate with various aiyl(Het) halides with Cs(2)CO(3) as base in 1.4-dioxane as solvent was investigated, which resulted in the formation of the desired compounds in moderate to excellent yields (C) 2010 Elsevier Ltd All rights reserved

  DOI：

  10.1016/j.tetlet.2010.06.083

文献信息

• Ligand-Promoted <i>Meta</i>-C–H Arylation of Anilines, Phenols, and Heterocycles
  作者：Peng Wang、Marcus E. Farmer、Xing Huo、Pankaj Jain、Peng-Xiang Shen、Mette Ishoey、James E. Bradner、Steven R. Wisniewski、Martin D. Eastgate、Jin-Quan Yu

  DOI：10.1021/jacs.6b04966

  日期：2016.7.27

  Here we report the development of a versatile 3-acetylamino-2-hydroxypyridine class of ligands that promote meta-C-H arylation of anilines, heterocyclic aromatic amines, phenols, and 2-benzyl heterocycles using norbornene as a transient mediator. More than 120 examples are presented, demonstrating this ligand scaffold enables a wide substrate and coupling partner scope. Meta-C-H arylation with heterocyclic

  在这里，我们报告了一种通用的 3-乙酰氨基-2-羟基吡啶类配体的开发，这些配体使用降冰片烯作为瞬态介质促进苯胺、杂环芳香胺、苯酚和 2-苄基杂环的间位 CH 芳基化。提供了 120 多个例子，证明了这种配体支架能够实现广泛的底物和偶联伙伴范围。使用该配体还首次实现了以杂环芳基碘化物作为偶联伙伴的间位 CH 芳基化。通过允许来那度胺衍生物的间位 CH 芳基化，展示了这种药物发现转化的效用。还展示了该反应的无银方案的第一步。
• [EN] SKELETAL MUSCLE DELIVERY PLATFORMS AND METHODS OF USE<br/>[FR] PLATEFORMES D'ADMINISTRATION À DES MUSCLES SQUELETTIQUES ET MÉTHODES D'UTILISATION
  申请人：ARROWHEAD PHARMACEUTICALS INC

  公开号：WO2022056269A1

  公开（公告）日：2022-03-17

  The present disclosure relates to delivery platforms that specifically and efficiently direct payloads to skeletal muscle cells in a subject, in vivo. The delivery platforms diclosed herein include targeting ligands (such as compounds that have affinity for integrins, including alpha- v-beta-6) and pharmacokinetic/pharmacodynamic (PK/PD) modulators, to facilitate the delivery of payloads to cells, including to skeletal muscle cells. Suitable payloads for use in the delivery platforms disclosed herein include RNAi agents, which can be linked or conjugated to the delivery platofrms, and when delivered in vivo, provide for the inhibition of gene expression in skeletal muscle cells. Pharmaceutical compositions that include the skeletal muscle cell delivery platform are also described, as well as methods of use for the treatment of various diseases and disorders where delivery of a therapeutic payload to a skeletal muscle cell is desirable.

  本公开涉及将有效载荷有针对性地且高效地引导至体内骨骼肌细胞的传递平台。所述传递平台包括靶向配体（例如具有亲和力的化合物，包括α-v-β-6整合素）和药代动力学/药效学（PK/PD）调节剂，以促进有效载荷传递到细胞，包括骨骼肌细胞。适用于本公开的传递平台的有效载荷包括RNAi剂，可以链接或结合到传递平台上，在体内传递时，可以抑制骨骼肌细胞的基因表达。还描述了包括骨骼肌细胞传递平台的药物组合物，以及用于治疗各种疾病和疾病的方法，其中传递治疗有效载荷至骨骼肌细胞是可取的。
• Pd-catalyzed amidation of aryl(Het) halides with tert-butyl carbamate
  作者：Lijin Qin、Hongmeng Cui、Dapeng Zou、Jingya Li、Yangjie Wu、Zhiwu Zhu、Yusheng Wu

  DOI：10.1016/j.tetlet.2010.06.083

  日期：2010.8

  Pd-catalyzed cross-coupling reaction of tert-butyl carbamate with various aiyl(Het) halides with Cs(2)CO(3) as base in 1.4-dioxane as solvent was investigated, which resulted in the formation of the desired compounds in moderate to excellent yields (C) 2010 Elsevier Ltd All rights reserved
• [EN] INTEGRIN TARGETING LIGANDS AND USES THEREOF<br/>[FR] LIGANDS CIBLANT UNE INTÉGRINE ET LEURS UTILISATIONS
  申请人：ARROWHEAD PHARMACEUTICALS INC

  公开号：WO2022056286A1

  公开（公告）日：2022-03-17

  Synthetic ανβ6 integrin ligands of Formula (I) having serum stability and affinity for integrin ανβ6, which is a receptor expressed in a variety of cell types, are described. The described ligands are usful for delivering cargo molecules, such as RNAi agents or other oligonucleotide-based compounds, to cells that express integrin ανβ6, and thereby facilitating the uptake of the cargo molecules into these cells. Compositions that include ανβ6 integrin ligands and methods of use are also described Formula (I).

  本文描述了具有血清稳定性和与细胞表达的受体ανβ6亲和力的合成ανβ6整合素配体的公式（I）。所述配体可用于向表达ανβ6整合素的细胞输送载荷分子，例如RNAi剂或其他基于寡核苷酸的化合物，从而促进这些细胞对载荷分子的摄取。本文还描述了包括ανβ6整合素配体的组合物和使用方法。