摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

1-(2'-噻吩基)乙基硫醇 | 94089-02-8

中文名称
1-(2'-噻吩基)乙基硫醇
中文别名
——
英文名称
1-(thiophene-2-yl)ethanethiol
英文别名
1-(2'-thienyl)ethyl mercaptan;1-(2-thienyl)ethyl mercaptan;1-(thiophen-2-yl)ethanethiol;1-(2-Thienyl)ethanethiol;1-thiophen-2-ylethanethiol
1-(2'-噻吩基)乙基硫醇化学式
CAS
94089-02-8
化学式
C6H8S2
mdl
MFCD00142373
分子量
144.262
InChiKey
NCCCTQRHFVSOMP-UHFFFAOYSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

物化性质

  • 沸点:
    98°C
  • 密度:
    1.1400
  • LogP:
    2.76
  • 物理描述:
    Colourless clear liquid; Strong mercaptan aroma
  • 溶解度:
    Very slightly soluble in water
  • 折光率:
    1.568-1.578
  • 保留指数:
    1136

计算性质

  • 辛醇/水分配系数(LogP):
    2.1
  • 重原子数:
    8
  • 可旋转键数:
    1
  • 环数:
    1.0
  • sp3杂化的碳原子比例:
    0.333
  • 拓扑面积:
    29.2
  • 氢给体数:
    1
  • 氢受体数:
    2

安全信息

  • 海关编码:
    2934999090

SDS

SDS:e2bdaa7f599870a2005c1e95e37709c4
查看
Name: 1-(2 -Thienyl)Ethylmercaptan 98% Material Safety Data Sheet
Synonym: 1-Mercapto-1-(2-Thienyl)Ethane
CAS: 94089-02-8
Section 1 - Chemical Product MSDS Name:1-(2 -Thienyl)Ethylmercaptan 98% Material Safety Data Sheet
Synonym:1-Mercapto-1-(2-Thienyl)Ethane

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS
CAS# Chemical Name content EINECS#
94089-02-8 1-(2'-Thienyl)Ethylmercaptan 98% 302-104-4
Hazard Symbols: XN
Risk Phrases: 22

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Harmful if swallowed.Light sensitive.Air sensitive.The toxicological properties of this material have not been fully investigated.
Potential Health Effects
Eye:
May cause eye irritation. May cause chemical conjunctivitis and corneal damage.
Skin:
May cause skin irritation. May cause cyanosis of the extremities.
Ingestion:
May cause gastrointestinal irritation with nausea, vomiting and diarrhea. The toxicological properties of this substance have not been fully investigated.
Inhalation:
May cause respiratory tract irritation. The toxicological properties of this substance have not been fully investigated. Aspiration may lead to pulmonary edema. Inhalation at high concentrations may cause CNS depression and asphixiation.
Chronic:
Effects may be delayed.

Section 4 - FIRST AID MEASURES
Eyes: Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid.
Skin:
Get medical aid. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
Ingestion:
Never give anything by mouth to an unconscious person. Get medical aid. Do NOT induce vomiting. If conscious and alert, rinse mouth and drink 2-4 cupfuls of milk or water.
Inhalation:
Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical aid. Do NOT use mouth-to-mouth resuscitation.
Notes to Physician:

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Combustible liquid.
Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas. Containers may explode when heated.
Runoff from fire control or dilution water may cause pollution.
Extinguishing Media:
In case of fire, use water, dry chemical, chemical foam, or alcohol-resistant foam. Use water spray to cool fire-exposed containers.

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Absorb spill with inert material (e.g. vermiculite, sand or earth), then place in suitable container. Avoid runoff into storm sewers and ditches which lead to waterways. Clean up spills immediately, observing precautions in the Protective Equipment section. Remove all sources of ignition. Use a spark-proof tool. Provide ventilation.
Place under an inert atmosphere.

Section 7 - HANDLING and STORAGE
Handling:
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well-ventilated area. Avoid contact with eyes, skin, and clothing. Empty containers retain product residue, (liquid and/or vapor), and can be dangerous. Keep container tightly closed. Keep away from heat, sparks and flame. Avoid ingestion and inhalation. Store protected from light. Handle under an inert atmosphere. Store protected from air. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose empty containers to heat, sparks or open flames.
Storage:
Keep away from sources of ignition. Keep container closed when not in use. Store in a tightly closed container. Store in a cool, dry, well-ventilated area away from incompatible substances. Do not expose to air. Store protected from light. Store under an inert atmosphere.

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels.
Exposure Limits CAS# 94089-02-8: Personal Protective Equipment Eyes: Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Liquid
Color: clear, colorless
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: 98 deg C @ 12.00mm Hg
Freezing/Melting Point: Not available.
Autoignition Temperature: Not available.
Flash Point: 79 deg C ( 174.20 deg F)
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water: slightly soluble
Specific Gravity/Density: 1.1400g/cm3
Molecular Formula: C6H8S2
Molecular Weight: 144.25

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Stable under normal temperatures and pressures.
Conditions to Avoid:
Incompatible materials, light, ignition sources, exposure to air, excess heat, strong oxidants.
Incompatibilities with Other Materials:
Oxidizing agents, air, direct light.
Hazardous Decomposition Products:
Carbon monoxide, irritating and toxic fumes and gases, carbon dioxide, sulfur oxides (SOx), including sulfur oxide and sulfur dioxide.
Hazardous Polymerization: Has not been reported

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 94089-02-8 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
1-(2'-Thienyl)Ethylmercaptan - Not listed by ACGIH, IARC, or NTP.

Section 12 - ECOLOGICAL INFORMATION


Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

Section 14 - TRANSPORT INFORMATION

IATA
Not regulated as a hazardous material.
IMO
Not regulated as a hazardous material.
RID/ADR
Not regulated as a hazardous material.

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
Safety Phrases:
S 20 When using do not eat or drink.
WGK (Water Danger/Protection)
CAS# 94089-02-8: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 94089-02-8 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 94089-02-8 is not listed on the TSCA inventory.
It is for research and development use only.


SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

  • 作为反应物:
    描述:
    1-(2'-噻吩基)乙基硫醇(6,8-Dibromo-5-methyl-imidazo[1,2-a]pyridin-3-yl)-methanol溶剂黄146 作用下, 以34%的产率得到6,8-Dibromo-5-methyl-3-[1-(2-thienyl)ethylsulfanylmethyl]imidazo[1,2-a]pyridine
    参考文献:
    名称:
    Mavel; Renou; Galtier, Arzneimittel-Forschung/Drug Research, 2001, vol. 51, # 4, p. 304 - 309
    摘要:
    DOI:
  • 作为产物:
    描述:
    1-(噻吩-2-基)-1-乙醇盐酸硫脲 、 sodium hydroxide 作用下, 以 为溶剂, 生成 1-(2'-噻吩基)乙基硫醇
    参考文献:
    名称:
    通过改变关键咖啡气味呋喃-2-基甲硫醇的结构基序合成的巯基呋喃和巯基噻吩的同源系列中的结构-气味关联
    摘要:
    呋喃-2-基甲硫醇(2-糠硫醇; 2-FFT,1)是众所周知的烘烤和磨碎咖啡中的主要气味剂,先前还被广泛用于肉类,面包和烘焙等热处理食品中芝麻籽。其独特的咖啡香气质量非常低浓度引起,而事实上,呈现出类似的结构,只有极少数的化合物先前已在食品中描述使1结构-气味活性研究的合适人选。为了深入了解在低浓度下会发出类似咖啡的气味的结构特征,合成了46种杂环硫醇和硫醚,其中32种首次合成,并确定了它们的气味质量和气味阈值。巯基向3位的移动保持了咖啡样的香气,但是导致了气味阈值的增加。由于碳侧链的延长,硫醇基团与呋喃环的分离导致咖啡味气味的损失,并且还导致气味阈值的增加,尤其是对于ω-(呋喃-2-基)烷烃-在侧链中具有六个或七个碳原子的1-硫醇。呋喃环被噻吩环取代对大多数所研究化合物的气味特性没有显着影响,但是新合成的长链1-(呋喃-2-基)-和1-(噻吩-2-基)烷烃-1-硫醇引发了令人兴奋的百香果
    DOI:
    10.1021/acs.jafc.8b00857
点击查看最新优质反应信息

文献信息

  • Condensed imidazole derivatives
    申请人:Eisai Co., Ltd.
    公开号:US20040116328A1
    公开(公告)日:2004-06-17
    The present invention is related to compounds represented by the following formula, or salts or hydrates thereof 1 wherein, T 1 represents a 4- to 12-membered heterocyclic group containing one or two nitrogen atoms in the ring, which is a monocyclic or bicyclic structure that may have one or more substituents; X represents a C 1-6 alkyl group which may have one or more substituents, or such; Z 1 and Z 2 each independently represent a nitrogen atom or a group represented by the formula —CR 2 —; R 1 and R 2 independently represent a hydrogen atom, a C 1-6 alkyl group which may have one or more substituents, or a C 1-6 alkoxy group which may have one or more substituents, or such. These are novel compounds that exhibit an excellent DPPIV-inhibiting activity.
    本发明涉及以下公式所代表的化合物,或其盐或水合物 其中, T 1 代表一个含有一个或两个氮原子的4-至12-成员杂环基团,在环中是单环或双环结构,可能具有一个或多个取代基; X代表一个C 1-6 烷基基团,可能具有一个或多个取代基,或类似物; Z 1 和Z 2 各自独立地代表一个氮原子或由公式—CR 2 —所代表的基团; R 1 和R 2 独立地代表氢原子,一个C 1-6 烷基基团,可能具有一个或多个取代基,或一个C 1-6 烷氧基基团,可能具有一个或多个取代基,或类似物。 这些是表现出优异DPPIV抑制活性的新颖化合物。
  • BITTER TASTE MODIFIERS INCLUDING SUBSTITUTED 1-BENZYL-3-(1-(ISOXAZOL-4-YLMETHYL)-1H-PYRAZOL-4-YL)IMIDAZOLIDINE-2,4-DIONES AND COMPOSITIONS THEREOF
    申请人:SENOMYX, INC.
    公开号:US20160376263A1
    公开(公告)日:2016-12-29
    The present invention includes compounds and compositions known to modify the perception of bitter taste, and combinations of said compositions and compounds with additional compositions, compounds, and products. Exemplary compositions comprise one or more of the following: cooling agents; inactive drug ingredients; active pharmaceutical ingredients; food additives or foodstuffs; flavorants, or flavor enhancers; food or beverage products; bitter compounds; sweeteners; bitterants; sour flavorants; salty flavorants; umami flavorants; plant or animal products; compounds known to be used in pet care products; compounds known to be used in personal care products; compounds known to be used in home products; pharmaceutical preparations; topical preparations; cannabis-derived or cannabis-related products; compounds known to be used in oral care products; beverages; scents, perfumes, or odorants; compounds known to be used in consumer products; silicone compounds; abrasives; surfactants; warming agents; smoking articles; fats, oils, or emulsions; and/or probiotic bacteria or supplements.
    本发明涵盖已知用于改变苦味感知的化合物和组合物,以及所述组合物和化合物与额外的组合物、化合物和产品的组合。示例组合物包括以下一种或多种:冷却剂;无活性药物成分;活性药用成分;食品添加剂或食品;调味剂或调味增强剂;食品或饮料产品;苦味化合物;甜味剂;苦味剂;酸味调味剂;咸味调味剂;鲜味调味剂;植物或动物产品;已知用于宠物护理产品中的化合物;已知用于个人护理产品中的化合物;已知用于家用产品中的化合物;制药制剂;局部制剂;大麻衍生或与大麻相关的产品;已知用于口腔护理产品中的化合物;饮料;香味、香水或除臭剂;已知用于消费品中的化合物;硅化合物;磨料;表面活性剂;发热剂;吸烟物品;脂肪、油脂或乳化剂;和/或益生菌或补充剂。
  • COMPOUNDS USEFUL AS MODULATORS OF TRPM8
    申请人:Senomyx, Inc.
    公开号:US20170096418A1
    公开(公告)日:2017-04-06
    The present disclosure relates to compounds which are useful as cooling sensation compounds.
    本公开涉及作为冷感化合物有用的化合物。
  • Thiazolopyrimidines and thier use as modulators of chemokine receptor activity
    申请人:——
    公开号:US20030032642A1
    公开(公告)日:2003-02-13
    The invention provides certain thiazolopyrimidine compound, processes and intermediates used in their preparation, pharmaceutical compositions containing them and their use in therapy.
    本发明提供了某些噻唑嘧啶化合物、其制备过程和中间体、含有它们的药物组合物以及它们在治疗中的用途。
  • Combination drug
    申请人:Yasuda Nobuyuki
    公开号:US20060094722A1
    公开(公告)日:2006-05-04
    The present invention provides pharmaceutical agents comprising a dipeptidyl peptidase IV (DPPIV) inhibitor and a biguanide agent in combination, which enhance the effects of active circulating glucagon-like peptide-1 (GLP-1) and/or active circulating glucagon-like peptide-2 (GLP-2).
    本发明提供了一种药物制剂,包括二肽基肽酶IV(DPPIV)抑制剂和双胍类药物的组合,其增强了活性循环胰高血糖素样肽-1(GLP-1)和/或活性循环胰高血糖素样肽-2(GLP-2)的效果。
查看更多

表征谱图

  • 氢谱
    1HNMR
  • 质谱
    MS
  • 碳谱
    13CNMR
  • 红外
    IR
  • 拉曼
    Raman
hnmr
mass
cnmr
ir
查看更多图谱数据,请前往“摩熵化学”平台
  • 峰位数据
  • 峰位匹配
  • 表征信息
Shift(ppm)
Intensity
查看更多图谱数据,请前往“摩熵化学”平台
Assign
Shift(ppm)
查看更多图谱数据,请前往“摩熵化学”平台
测试频率
样品用量
溶剂
溶剂用量
查看更多图谱数据,请前往“摩熵化学”平台

同类化合物

香薷二醇 顺式-1-(2-呋喃基)-1-戊烯 顺-1,2-二氰基-1,2-双(2,4,5-三甲基-3-噻吩基)乙烯 顺-1,2-(2-噻嗯基)二乙烯 雷尼替丁-N,S-二氧化物 雷尼替丁-N-氧化物 西拉诺德 螺[环氧乙烷-2,3'-吡咯并[1,2-a]吡嗪] 萘并[2,1,8-def]喹啉 苯硫基溴化镁 苯甲酸,2-[[[7-[[(3.β.)-3-羟基-28-羰基羽扇-20(29)-烯-28-基]amino]庚基]氨基]羰基] 苍术素 缩水甘油糠醚 紫苏烯 糠醛肟 糠醇-d2 糠醇 糠基硫醇-d2 糠基硫醇 糠基甲基硫醚 糠基氯 糠基氨基甲酸异丙酯 糠基丙基醚 糠基丙基二硫醚 糠基3-巯基-2-甲基丙酸酯 糠基-异戊基醚 糠基-异丁基醚 糠基 2-甲基-3-呋喃基二硫醚 磷杂茂 硫酸异丙基糠酯 硫代磷酸O-糠基O-甲基S-(2-丙炔基)酯 硫代磷酸O-乙基O-糠基S-(2-丙炔基)酯 硫代甲酸S-糠酯 硫代噻吩甲酰基三氟丙酮 硫代乙酸糠酯 硫代丙酸糠酯 硅烷,三(1-甲基乙基)[(3-甲基-2-呋喃基)氧代]- 硅烷,(1,1-二甲基乙基)(2-呋喃基甲氧基)二甲基- 砷杂苯 甲酸糠酯 甲氧亚胺基呋喃乙酸铵盐 甲基糠基醚 甲基糠基二硫 甲基呋喃-2-基甲基氨基甲酸酯 甲基丙烯酸糠酯 甲基5-(羟基甲基)-2-呋喃甲亚氨酸酯 甲基(2Z)-3-甲基-2-(甲基亚胺)-4-氧代-3,4-二氢-2H-1,3-噻嗪-6-羧酸酯 甲基(2Z)-3-氨基-2-(甲基亚胺)-4-氧代-3,4-二氢-2H-1,3-噻嗪-6-羧酸酯 甲基(2Z)-3-异丙基-2-(异丙基亚胺)-4-氧代-3,4-二氢-2H-1,3-噻嗪-6-羧酸酯 甲基(2-甲基-3-呋喃基)二硫