4-(叔丁氧羰氨基)-3-甲氧基苯硼酸频那醇酯 | 262433-02-3

• 物质功能分类: 化学试剂 - 有机试剂 - 硼酸
• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 中文名称: 4-(叔丁氧羰氨基)-3-甲氧基苯硼酸频那醇酯
• 中文别名: 4-(TERT-丁醇醚碳酰氨)-3-甲基苯硼酸,凤梨酸酯
• 英文名称: tert-butyl (2-methoxy-4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl)carbamate
• 英文别名: tert-Butyl N-[2-methoxy-4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]-carbamate；tert-butyl N-[2-methoxy-4-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)phenyl]carbamate
• CAS: 262433-02-3
• 化学式: C₁₈H₂₈BNO₅
• 分子量: 349.235
• InChiKey: HTNAUNFQAMHASO-UHFFFAOYSA-N

物化性质

• 沸点：
  416.7±40.0 °C(Predicted)
• 密度：
  1.09±0.1 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  3.34
• 重原子数：
  25
• 可旋转键数：
  5
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.61
• 拓扑面积：
  66
• 氢给体数：
  1
• 氢受体数：
  5

安全信息

• 海关编码：
  2934999090
• 危险性防范说明：
  P261,P305+P351+P338
• 危险性描述：
  H302,H315,H319,H335

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : 4-(Tert-Butoxycarbonylamino)-3-
Methoxyphenylboronic Acid Pinacol Ester
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Not a hazardous substance or mixture according to Regulation (EC) No. 1272/2008.
This substance is not classified as dangerous according to Directive 67/548/EEC.
Label elements
The product does not need to be labelled in accordance with EC directives or respective national laws.
Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

---

SECTION 3: Composition/information on ingredients
Substances
Molecular weight : 349,24 g/mol
No components need to be disclosed according to the applicable regulations.

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
No data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Nature of decomposition products not known.
Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
No data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Avoid
breathing dust.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Storage class (TRGS 510): Non Combustible Solids
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Use equipment for eye protection tested and approved under appropriate government standards
such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Choose body protection in relation to its type, to the concentration and amount of dangerous
substances, and to the specific work-place., The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Respiratory protection is not required. Where protection from nuisance levels of dusts are desired,
use type N95 (US) or type P1 (EN 143) dust masks. Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour No data available
c) Odour Threshold No data available
d) pH No data available
e) Melting point/freezing No data available
point
f) Initial boiling point and No data available
boiling range
g) Flash point No data available
h) Evaporation rate No data available
i) Flammability (solid, gas) No data available
j) Upper/lower No data available
flammability or
explosive limits
k) Vapour pressure No data available
l) Vapour density No data available
m) Relative density No data available
n) Water solubility No data available
o) Partition coefficient: n- No data available
octanol/water
p) Auto-ignition No data available
temperature
q) Decomposition No data available
temperature
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
Other safety information
No data available

---

SECTION 10: Stability and reactivity
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
No data available
Incompatible materials
No data available
Hazardous decomposition products
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available

---

SECTION 12: Ecological information
Toxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other adverse effects
No data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
No data available

---

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
No data available
Chemical Safety Assessment
For this product a chemical safety assessment was not carried out

---

SECTION 16: Other information
Further information
Copyright 2014 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

反应信息

• 作为反应物：
  描述：

  4-(叔丁氧羰氨基)-3-甲氧基苯硼酸频那醇酯 在 三氟乙酸 作用下， 以 二氯甲烷 为溶剂， 反应 2.0h， 以68%的产率得到4-氨基-3-甲氧基苯硼酸频那醇酯
  参考文献：
  名称：

  Thienopyridine kinase inhibitors

  摘要：

  具有以下化学式的化合物对抑制蛋白酪氨酸激酶很有用。本发明还公开了制备这些化合物的方法、含有这些化合物的组合物，以及使用这些化合物进行治疗的方法。

  公开号：

  US20050020619A1
• 作为产物：
  描述：

  4-溴-2-甲氧基苯胺 在 (1,1'-bis(diphenylphosphino)ferrocene)palladium(II) dichloride 、 potassium acetate 作用下， 以 四氢呋喃 、 1,4-二氧六环 为溶剂， 反应 24.0h， 生成 4-(叔丁氧羰氨基)-3-甲氧基苯硼酸频那醇酯
  参考文献：
  名称：

  发现 ABBV-3373，一种抗 TNF 糖皮质激素受体调节剂免疫学抗体药物偶联物

  摘要：

  使用收敛合成路线以实现多个多样性点，对一系列糖皮质激素受体调节剂（GRM）的效力、选择性和体外药物特性进行了分析。尽管涵盖了大范围的多样性，但对非缀合小分子的分析并不理想，并且使用 MP-Ala-Ala 连接子将它们与小鼠抗肿瘤坏死因子 (TNF) 抗体缀合。对所得抗体药物偶联物 (ADC) 的筛选可以更好地评估功效和物理特性，从而强化了对完整 ADC 进行结构-活性关系研究的必要性。在测量生物标志物的急性小鼠接触超敏反应模型中筛选 DAR4 ADC，以确保足够的治疗窗口。在慢性小鼠关节炎模型中，小鼠抗 TNF GRM ADC 在单剂量 10 mg/kg ip 持续 30 天以上后有效。未缀合的有效负载和小鼠替代抗 TNF ADC 的数据确定了有效负载17，该有效负载 17 与人抗 TNF 抗体缀合，并以 ABBV-3373 的形式进入临床。

  DOI：

  10.1021/acs.jmedchem.2c01579

文献信息

• Tyrosine Kinase Inhibitor And Uses Thereof
  申请人：Xuanzhu Pharma Co., Ltd.

  公开号：US20170112833A1

  公开（公告）日：2017-04-27

  Disclosed is a compound of Formula (I) or a pharmaceutically acceptable salt, ester, or solvate thereof, or their stereoisomers, which can be used as tyrosine kinase inhibitor. Also disclosed is a method for preparing the compound, a pharmaceutical composition and a kit comprising the compound, and uses of the compound. The compound can be used as tyrosine kinase inhibitor, or can be used to reduce or inhibit activity of EGFR or mutant thereof, such as EGFR mutant comprising T790M mutation, in a cell, or to treat and/or prevent a disease associated with overactivity of EGFR, such as cancer.

  公开了一种公式(I)的化合物或其药物可接受的盐、酯或溶剂，或它们的立体异构体，可用作酪氨酸激酶抑制剂。还公开了制备该化合物的方法、包含该化合物的药物组合物和套件，以及该化合物的用途。该化合物可用作酪氨酸激酶抑制剂，或可用于减少或抑制细胞中EGFR或其突变体的活性，例如包含T790M突变的EGFR突变体，或用于治疗和/或预防与EGFR过度活动相关的疾病，如癌症。
• Pyrazolopyrimidines as therapeutic agents
  申请人：Abbott Laboratories

  公开号：US20020156081A1

  公开（公告）日：2002-10-24

  The present invention provides compounds of Formula I, 1 including pharmaceutically acceptable salts and/or prodrugs thereof, where G, R 2 , and R 3 are defined as described herein.

  本发明提供了公式I的化合物，包括其药学上可接受的盐和/或前药，其中G、R2和R3的定义如本文所述。
• Kinase antagonists
  申请人：Knight A. Zachary

  公开号：US20070293516A1

  公开（公告）日：2007-12-20

  The present invention provides novel compounds that are antagonists of PI3 kinase, PI3 kinase and tryosine kinase, PI3Kinase and mTOR, or PI3Kinase, mTOR and tryosine kinase.

  本发明提供了一种新型化合物，它们是 PI3 激酶、PI3 激酶和酪氨酸激酶、PI3 激酶和 mTOR，或者 PI3 激酶、mTOR 和酪氨酸激酶的拮抗剂。
• Thienopyridine and furopyridine kinase inhibitors
  申请人：Betschmann Patrick

  公开号：US20050026944A1

  公开（公告）日：2005-02-03

  Compounds having the formula are useful for inhibiting protein tyrosine kinases. The present invention also discloses methods of making the compounds, compositions containing the compounds, and methods of treatment using the compounds.

  具有以下化学式的化合物对抑制蛋白酪氨酸激酶具有用处。本发明还公开了制备这些化合物的方法、含有这些化合物的组合物，以及使用这些化合物进行治疗的方法。
• 4-AMINOPYRROLOPYRIMIDINES AS KINASE INHIBITORS
  申请人：——

  公开号：US20030187001A1

  公开（公告）日：2003-10-02

  Chemical compounds having structural formula I 1 and physiologically acceptable salts thereof, are inhibitors of serine/threonine and tyrosine kinase activity. Several of the kinases whose activity is inhibited by these compounds are involved in immunologic, hyperpro;iferative or angiogenic processes. Thus, these compounds can ameliorate disase states where angiogenesis or endothelial cell hyperproliferaton is a factor. These compounds can be used to treat cancer, hyperproliferative disorders, rheumatoid artheritis, disorders of the immune system, transplant rejection, and inflammatory disorders.

  具有结构式I1的化合物及其生理上可接受的盐是丝氨酸/苏氨酸激酶和酪氨酸激酶活性的抑制剂。这些化合物抑制的几种激酶参与免疫、高增殖或血管生成过程。因此，这些化合物可以改善血管生成或内皮细胞高增殖是因素的疾病状态。这些化合物可用于治疗癌症、高增殖性疾病、类风湿性关节炎、免疫系统疾病、移植排斥和炎症性疾病。