O-(叔丁基)-N-[9H-芴-9-甲氧羰基]-D-别苏氨酸 | 170643-02-4

• 物质功能分类: 生物化工 - 氨基酸及其衍生物 - 苏氨酸类衍生物
• 分子结构分类: 有机化合物 - 苯类化合物 - 芴
• 中文名称: O-(叔丁基)-N-[9H-芴-9-甲氧羰基]-D-别苏氨酸
• 中文别名: (2R,3R)-2-((((9H-芴-9-基)甲氧基)羰基)氨基)-3-(叔-丁氧基)丁酸
• 英文名称: Fmoc-Thr(tBu)-OH
• 英文别名: (2R,3R)-2-((((9H-Fluoren-9-yl)methoxy)carbonyl)amino)-3-(tert-butoxy)butanoic acid；(2R,3R)-2-(9H-fluoren-9-ylmethoxycarbonylamino)-3-[(2-methylpropan-2-yl)oxy]butanoic acid
• CAS: 170643-02-4
• 化学式: C₂₃H₂₇NO₅
• mdl: MFCD00077074
• 分子量: 397.471
• InChiKey: LZOLWEQBVPVDPR-JLTOFOAXSA-N

物化性质

• 沸点：
  581.7±50.0 °C(Predicted)
• 密度：
  1.197

计算性质

• 辛醇/水分配系数(LogP)：
  4
• 重原子数：
  29
• 可旋转键数：
  8
• 环数：
  3.0
• sp3杂化的碳原子比例：
  0.391
• 拓扑面积：
  84.9
• 氢给体数：
  2
• 氢受体数：
  5

安全信息

• 危险性防范说明：
  P261,P280,P301+P312,P302+P352,P305+P351+P338
• 危险性描述：
  H302,H315,H319,H335
• 储存条件：
  2-8°C

SDS

Material Safety Data Sheet

---

Section 1. Identification of the substance
Product Name: Fmoc-d-allo-thr(tbu)-oh
Synonyms:

---

Section 2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.

---

Section 3. Composition/information on ingredients.
Ingredient name: Fmoc-d-allo-thr(tbu)-oh
CAS number: 170643-02-4

---

Section 4. First aid measures
Skin contact: Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact: Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion: Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

---

Section 5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

---

Section 6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution: Wear approved mask/respirator
Hand precaution: Wear suitable gloves/gauntlets
Skin protection: Wear suitable protective clothing
Eye protection: Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

---

Section 7. Handling and storage
Handling: This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Store in closed vessels.
Storage:

---

Section 8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

---

Section 9. Physical and chemical properties
Appearance: Not specified
Boiling point: No data
No data
Melting point:
Flash point: No data
Density: No data
Molecular formula: C23H27NO5
Molecular weight: 397.5

---

Section 10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides.

---

Section 11. Toxicological information
No data.

---

Section 12. Ecological information
No data.

---

Section 13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

---

Section 14. Transportation information
Non-harzardous for air and ground transportation.

---

Section 15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

制备方法与用途

FMOC-D-Allo-THR(TBU)-OH 是一种 D- 异丙肾上腺素衍生物[1]。

上下游信息

• 上游原料

  中文名称	英文名称	CAS号	化学式	分子量
  ——	Fmoc-D-alloThr(But)-OBut	——	C27H35NO5	453.579
  芴甲氧羰基-L-苏氨酸	Fmoc-D-allo-Thr-OH	130674-54-3	C19H19NO5	341.364
  氯甲酸-9-芴基甲酯	(fluorenylmethoxy)carbonyl chloride	28920-43-6	C15H11ClO2	258.704
  9-芴甲基-N-琥珀酰亚胺基碳酸酯	N-(9H-fluoren-2-ylmethoxycarbonyloxy)succinimide	82911-69-1	C19H15NO5	337.332

• 下游产品

  中文名称	英文名称	CAS号	化学式	分子量
  芴甲氧羰基-L-苏氨酸	Fmoc-D-allo-Thr-OH	130674-54-3	C19H19NO5	341.364

反应信息

• 作为反应物：
  描述：

  O-(叔丁基)-N-[9H-芴-9-甲氧羰基]-D-别苏氨酸 在 三氟乙酸 作用下， 反应 1.0h， 生成 芴甲氧羰基-L-苏氨酸
  参考文献：
  名称：

  Synthesis of Nα-(9-Fluorenylmethoxycarbonyl)-Allothreonine t-Butyl Ether via Threonine Oxazolines

  摘要：

  DOI：

  10.1016/00404-0399(50)0992l-
• 作为产物：
  描述：

  Fmoc‑(R)‑allo‑Thr(tBu)‑OH 在 palladium on activated charcoal 、 氢气 作用下， 以100%的产率得到O-(叔丁基)-N-[9H-芴-9-甲氧羰基]-D-别苏氨酸
  参考文献：
  名称：

  （2S，3S）-3-Me-谷氨酰胺和（R）-全苏氨酸衍生物的不对称合成适用于固相肽偶联。

  摘要：

  用于制备（2的实用新航线小号，3小号）-3-ME谷氨酰胺和（- [R ）-异基因-苏氨酸衍生物，细胞毒性海洋肽callipeltin O和Q的关键结构部件，适合的Fmoc-SPPS，分别为发达。通过手性Gly-Schiff碱的Ni（II）配合物的Michael加成反应合成了（2 S，3 S）-Fmoc-3-Me-Gln（Xan）-OH；而将Fmoc-（[R ）-异基因-Thr-OH，使用手性的Ni（II）络合物辅助α-差向异构化的方法，在开始的形式制备（小号）-Thr（吨丁基）-OH。

  DOI：

  10.1007/s00726-018-2677-5

文献信息

• Isostearyl Mixed Anhydrides for the Preparation of <i>N</i>-Methylated Peptides Using <i>C</i>-Terminally Unprotected <i>N</i>-Methylamino Acids
  作者：Haruaki Kurasaki、Akihiro Nagaya、Yutaka Kobayashi、Ayumu Matsuda、Masatoshi Matsumoto、Koki Morimoto、Tomonori Taguri、Hisayuki Takeuchi、Michiharu Handa、Douglas R. Cary、Naoki Nishizawa、Keiichi Masuya

  DOI：10.1021/acs.orglett.0c02984

  日期：2020.10.16

  Sustainable and efficient manufacturing methods for N-methylated peptides remain underexplored despite growing interest in therapeutic N-methylated peptides within the pharmaceutical industry. A methodology for the coupling of C-terminally unprotected N-methylamino acids mediated by an isostearic acid halide (ISTAX) and silylating reagent has been developed. This approach allows for the coupling of

  尽管制药行业对治疗性N-甲基化肽的兴趣日益浓厚，但N-甲基化肽的可持续和高效制造方法仍未得到充分探索。已经开发了一种由异硬脂酰卤 (ISTAX) 和甲硅烷基化试剂介导的C-末端未保护N-甲基氨基酸的偶联方法。这种方法允许在温和条件下以高产率偶联多种氨基酸和肽，而无需在C的过程中进行C端脱保护步骤-末端伸长。这些优点使其成为生产含有N-甲基氨基酸的肽治疗剂和诊断剂的有用合成方法。
• “O-Acyl isopeptide method” for peptide synthesis: synthesis of forty kinds of “O-acyl isodipeptide unit” Boc-Ser/Thr(Fmoc-Xaa)-OH
  作者：Taku Yoshiya、Atsuhiko Taniguchi、Youhei Sohma、Fukue Fukao、Setsuko Nakamura、Naoko Abe、Nui Ito、Mariusz Skwarczynski、Tooru Kimura、Yoshio Hayashi、Yoshiaki Kiso

  DOI：10.1039/b702284k

  日期：——

  The O-acyl isopeptide method has recently received attention as an efficient synthetic method for peptides. Herein, forty kinds of "O-acyl isodipeptide unit" Boc-Ser/Thr(Fmoc-Xaa)-OH (1-40) were effectively synthesized in two-steps without epimerization. The O-acyl isodipeptide units are important building blocks to enable the routine use of the O-acyl isopeptide method.

  作为有效的肽合成方法，O-酰基异肽方法最近受到关注。在此，两步法有效地合成了40种“ O-酰基异二肽单元” Boc-Ser / Thr（Fmoc-Xaa）-OH（1-40），而没有差向异构化。O-酰基异二肽单元是重要的组成部分，可以常规使用O-酰基异肽方法。
• [EN] BETA-HAIRPIN PEPTIDOMIMETICS<br/>[FR] PEPTIDOMIMÉTIQUES EN ÉPINGLE À CHEVEUX BÊTA
  申请人：POLYPHOR AG

  公开号：WO2016150576A1

  公开（公告）日：2016-09-29

  Beta-hairpin peptidomimetics of the general formula (I), and pharmaceutically acceptable salts thereof, with P, T, Q., and optionally L being elements as defined in the description and the claims, have Gram-negative antimicrobial activity to e.g. inhibit the growth or to kill microorganisms such as Klebsiellapneumoniae and/or Acinetobacter baumannii and/or Escherichia coli and/or Pseudomonas aeruginosa. They ca n be used as medicaments to treat or prevent infections or as disinfectants for foodstuffs, cosmetics, medicaments or other nutrient-containing materials. These peptidomimetics can be manufactured by a process which is based on a mixed solid- and solution phase synthetic strategy.

  Beta-发夹仿生肽的一般公式（I），及其药学上可接受的盐，其中P、T、Q.，以及可选的L作为描述和权利要求中定义的元素，具有抗革兰氏阴性微生物活性，例如抑制生长或杀灭肺炎克雷伯菌、包括鲍曼不动杆菌、大肠杆菌和铜绿假单胞菌等微生物。它们可用作药物治疗或预防感染，或用作食品、化妆品、药物或其他含营养物质的材料的消毒剂。这些仿生肽可以通过基于混合固相和溶液相合成策略的过程制造。
• Solid-Phase Total Synthesis and Dual Mechanism of Action of the Channel-Forming 48-mer Peptide Polytheonamide B
  作者：Atsushi Hayata、Hiroaki Itoh、Masayuki Inoue

  DOI：10.1021/jacs.8b06755

  日期：2018.8.22

  unusual residues significantly heightened the synthetic challenges, impeding the solid-phase peptide synthesis (SPPS) of 1. In this study, we first addressed the synthesis problem by extensive optimization of various factors of the SPPS. Adaptation of a new protective group strategy allowed for elongation of a 37-mer peptide on resin, to which an N-terminal 11-mer fragment was condensed. Removal of the

  Polytheonamide B (1) 由于其极其复杂的结构、体外通道形成能力和极强的细胞毒性，是一种独特的肽天然产物。1 的 48 聚体序列包含交替的 d,l-氨基酸，并拥有一系列空间庞大的 β-四取代和氢键形成残基。据信，这些不寻常的结构特征驱动 1 折叠成 4.5 nm 长的管，在质膜上形成跨膜离子通道，并发挥细胞毒性。然而，尽管其潜在的生物学应用，这些不寻常的残基的多次取代显着增加了合成挑战，阻碍了 1 的固相肽合成 (SPPS)。在这项研究中，我们首先通过广泛优化各种因素来解决合成问题。 SPPS。新的保护组策略的适应允许树脂上的 37 聚体肽延长，N 端 11 聚体片段缩合到树脂上。去除 18 个保护基团和树脂以优异的总产率产生了 1 个（4.5%，从 17 个步骤开始 76 个步骤）。SPPS 协议在操作上很简单，并且被证明很容易适应荧光 48 聚体探针 2 的全合成。合成
• LYSOBACTIN AMIDES
  申请人：VON NUSSBAUM Franz

  公开号：US20090203582A1

  公开（公告）日：2009-08-13

  The invention relates to lysobactin amides and methods for their preparation, as well as their use for manufacturing medicaments for the treatment and/or prophylaxis of diseases, in particular bacterial infectious diseases.

  这项发明涉及赖氨酸胞素酰胺及其制备方法，以及它们用于制造治疗和/或预防疾病，特别是细菌感染性疾病的药物的用途。