摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

(Z)-3-benzylidene-5-phenyldihydrofuran-2(3H)-one

中文名称
——
中文别名
——
英文名称
(Z)-3-benzylidene-5-phenyldihydrofuran-2(3H)-one
英文别名
3-benzylidene-5-phenyldihydrofuran-2(3H)-one;(3Z)-3-benzylidene-5-phenyloxolan-2-one
(Z)-3-benzylidene-5-phenyldihydrofuran-2(3H)-one化学式
CAS
——
化学式
C17H14O2
mdl
——
分子量
250.297
InChiKey
PQXUESHTBWOCFQ-PTNGSMBKSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

计算性质

  • 辛醇/水分配系数(LogP):
    3.8
  • 重原子数:
    19
  • 可旋转键数:
    2
  • 环数:
    3.0
  • sp3杂化的碳原子比例:
    0.12
  • 拓扑面积:
    26.3
  • 氢给体数:
    0
  • 氢受体数:
    2

反应信息

  • 作为产物:
    描述:
    1-苯基-3-丁炔-1-醇 在 palladium diacetate 三苯基膦 作用下, 以 四氢呋喃甲苯 为溶剂, 反应 16.0h, 生成 (Z)-3-benzylidene-5-phenyldihydrofuran-2(3H)-one
    参考文献:
    名称:
    Synthesis of substituted α-methylene-γ-butyrolactones from chloroformates via palladium catalysed cyclisation–anion capture
    摘要:
    氯甲酸酯在Pd(0)催化剂存在下与邻近的炔功能团进行环化反应,随后进行阴离子捕获,可以中等至良好产率得到α-亚甲基-γ-丁内酯衍生物。
    DOI:
    10.1039/b006842j
点击查看最新优质反应信息

文献信息

  • α-Alkylidene-γ-butyrolactone Formation via Bi(OTf)<sub>3</sub>-Catalyzed, Dehydrative, Ring-Opening Cyclizations of Cyclopropyl Carbinols: Understanding Substituent Effects and Predicting <i>E</i>/<i>Z</i> Selectivity
    作者:Matthew J. Sandridge、Brett D. McLarney、Corey W. Williams、Stefan France
    DOI:10.1021/acs.joc.7b01706
    日期:2017.10.20
    A Bi(OTf)3-catalyzed ring-opening cyclization of (hetero)aryl cyclopropyl carbinols to form α-alkylidene-γ-butyrolactones (ABLs) is reported. This transformation represents different chemoselectivity from previous reports that demonstrated formation of (hetero)aryl-fused cyclohexa-1,3-dienes upon acid-promoted cyclopropyl carbinol ring opening. ABLs are obtained in up to 89% yield with a general preference
    据报道,Bi(OTf)3催化(杂)芳基环丙基甲醇的开环环化反应,形成α-亚烷基-γ-丁内酯(ABL)。这种转化代表了与以前的报道不同的化学选择性,以前的报道表明在酸促进的环丙基甲醇开环后会形成(杂)芳基稠合的环己-1,3-二烯。通常以E-异构体为佳,以高达89%的产率获得ABL 。从机械上讲,Bi(OTf)3用作稳定且易于处理的TfOH的前体。然后,TfOH催化环丙基羰基阳离子的形成,该环丙基经历开环,分子内被相邻酯基的捕集,随后的水解以及甲醇的损失,从而导致了ABL的形成。甲醇和环丙烷上取代基的性质和相对位置决定了化学和立体选择性的结果。甲醇取代基决定了环丙基羰基阳离子形成的程度。环丙烷供体取代基决定了整个反应的化学选择性。弱稳定或电子贫乏的供体基团可提供更高的ABL产品收率。相反,观察到大量具有高度稳定的环丙烷供体取代基的竞争产物。最后,一个预测模型E / Z选择性是通过DFT计算得出的。
  • Synthesis of (<i>E</i>)- and (<i>Z</i>)-α-Alkylidene-γ-aryl-γ-butyrolactones via Alkenylalumination of Oxiranes
    作者:P. Veeraraghavan Ramachandran、Garrett Garner、Debarshi Pratihar
    DOI:10.1021/ol702079f
    日期:2007.11.1
    presence of BF(3).Et(2)O, affords the corresponding (Z)-alpha-alkylidene-gamma-aryl-gamma-hydroxy esters in 81-100% Z-selectivity. Chromatographic separation of isomers, followed by lactonization with trifluoroacetic acid, provides isomerically pure (Z)-alpha-alkylidene-gamma-aryl-gamma-butyrolactones in 53-78% overall yield. Isomerization of the (Z)-alkylidene hydroxyl esters using LDA, followed by
    在BF(3).Et(2)O存在下,用[α-(乙氧基羰基)链烯基]二异丁基铝对取代的苯乙烯氧化物进行烯基铝化,得到相应的(Z)-α-亚烷基-γ-芳基-γ-羟基酯Z选择性达到81-100%。色谱分离异构体,然后用三氟乙酸内酯化,以53-78%的总收率提供异构纯的(Z)-α-亚烷基-γ-芳基-γ-丁内酯。使用LDA对(Z)-亚烷基羟基酯进行异构化,然后使用庞大的质子源(例如BHT)进行质子化,提供了一条简单的途径,可以将相应的α-(E)-亚烷基-γ-苯基-γ-羟基酯产率为72-78%,将其环化以得到产率为78-85%的相应的(E)-丁内酯。
  • Synthesis of substituted α-methylene-γ-butyrolactones from chloroformates via palladium catalysed cyclisation–anion capture
    作者:Ronald Grigg、Vladimir Savic
    DOI:10.1039/b006842j
    日期:——
    Cyclisation of chloroformates onto proximate alkyne functionality in the presence of a Pd(0) catalyst followed by anion capture affords α-methylene-γ-butyrolactone derivatives in moderate to good yields.
    氯甲酸酯在Pd(0)催化剂存在下与邻近的炔功能团进行环化反应,随后进行阴离子捕获,可以中等至良好产率得到α-亚甲基-γ-丁内酯衍生物。
查看更多