异丙硝唑 | 14885-29-1

• 物质功能分类: 分析化学 - 标准品 - 法医和兽医标准品
• 分子结构分类: 有机化合物 - 有机杂环化合物 - 唑类
• 中文名称: 异丙硝唑
• 中文别名: 异丙硝唑-同位素
• 英文名称: ipronidazole
• 英文别名: 1-Methyl-2-isopropyl-5-nitroimidazol；2-isopropyl-1-methyl-5-nitroimidazole；1-methyl-2-isopropyl-5-nitroimidazole；1-methyl-5-nitro-2-propan-2-ylimidazole
• CAS: 14885-29-1
• 化学式: C₇H₁₁N₃O₂
• mdl: MFCD00866597
• 分子量: 169.183
• InChiKey: NTAFJUSDNOSFFY-UHFFFAOYSA-N

物化性质

• 熔点：
  60°
• 沸点：
  298.47°C (rough estimate)
• 密度：
  1.2509 (rough estimate)
• 溶解度：
  DMF：14mg/mL；二甲基亚砜：11mg/mL；乙醇：12mg/mL； PBS（pH 7.2）：0.16 mg/mL
• 碰撞截面：
  126.1 Ų [M+H]+ [CCS Type: TW]

计算性质

• 辛醇/水分配系数(LogP)：
  1.1
• 重原子数：
  12
• 可旋转键数：
  1
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.571
• 拓扑面积：
  63.6
• 氢给体数：
  0
• 氢受体数：
  3

安全信息

• 危险品标志：
  Xn
• 危险类别码：
  R22
• WGK Germany：
  3
• 海关编码：
  2933290090

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : Ipronidazole
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No. : 14885-29-1
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral (Category 4), H302
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Xn Harmful R22
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal word Warning
Hazard statement(s)
H302 Harmful if swallowed.
Precautionary statement(s) none
Supplemental Hazard none
Statements
Other hazards - none

---

SECTION 3: Composition/information on ingredients
Substances
Formula : C7H11N3O2
Molecular Weight : 169,18 g/mol
CAS-No. : 14885-29-1
EC-No. : 238-957-3
Hazardous ingredients according to Regulation (EC) No 1272/2008
Component Classification Concentration
Ipronidazole
CAS-No. 14885-29-1 Acute Tox. 4; H302 <= 100 %
EC-No. 238-957-3
Hazardous ingredients according to Directive 1999/45/EC
Component Classification Concentration
Ipronidazole
CAS-No. 14885-29-1 Xn, R22 <= 100 %
EC-No. 238-957-3
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, nitrogen oxides (NOx)
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Store under inert gas.
Specific end use(s)
A part from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher
level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges.
Use respirators and components tested and approved under appropriate government standards
such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
Colour: colourless
b) Odour odourless
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing 58 °C
point
f) Initial boiling point and no data available
boiling range
g) Flash point no data available
h) Evapouration rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density no data available
n) Water solubility 1,7 g/l at 20 °C
o) Partition coefficient: n- log Pow: 1,36 at 20 °C
octanol/water
p) Auto-ignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Oxidizing agents
Hazardous decomposition products
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
LD50 Oral - rat - male and female - 920 mg/kg
LD50 Oral - rabbit - male and female - 960 mg/kg
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Ames test
S. typhimurium
Result: positive
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

---

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
no data available

---

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment
For this product a chemical safety assessment was not carried out

---

SECTION 16: Other information
Full text of H-Statements referred to under sections 2 and 3.
Acute Tox. Acute toxicity
H302 Harmful if swallowed.
Full text of R-phrases referred to under sections 2 and 3
Xn Harmful
R22 Harmful if swallowed.
Further information
Copyright 2013 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

反应信息

• 作为反应物：
  描述：

  异丙硝唑 在 palladium on activated charcoal 氢气 作用下， 以 1,4-二氧六环 为溶剂， 25.0 ℃ 、101.33 kPa 条件下， 生成 N-(3,4-Dichlorophenyl)-N¹-(2-isopropyl-1-methylimidazol-5-yl)urea
  参考文献：
  名称：

  Al-Shaar, Adnan H. M.; Gilmour, David W.; Lythgoe, David J., Journal of the Chemical Society. Perkin transactions I, 1992, # 21, p. 2779 - 2788

  摘要：

  DOI：
• 作为产物：
  描述：

  2-异丙基-1-甲基-1H-咪唑 生成 异丙硝唑
  参考文献：
  名称：

  MAKSIMOVIC, R.;DUSANOVIC, D.;RADOVIC, N.

  摘要：

  DOI：

文献信息

• SILICON BASED DRUG CONJUGATES AND METHODS OF USING SAME
  申请人：BlinkBio, Inc.

  公开号：US20170202970A1

  公开（公告）日：2017-07-20

  Described herein are silicon based conjugates capable of delivering one or more payload moieties to a target cell or tissue. Contemplated conjugates may include a silicon-heteroatom core, one or more optional catalytic moieties, a targeting moiety that permits accumulation of the conjugate within a target cell or tissue, one or more payload moieties (e.g., a therapeutic agent or imaging agent), and two or more non-interfering moieties covalently bound to the silicon-heteroatom core.

  本文描述了基于硅的共轭物，能够将一个或多个有效载荷基团传递到靶细胞或组织。考虑到的共轭物可能包括一个硅-杂原子核心，一个或多个可选的催化基团，一个定位基团，允许共轭物在靶细胞或组织内积累，一个或多个有效载荷基团（例如，治疗剂或成像剂），以及与硅-杂原子核心共价结合的两个或更多个不干扰基团。
• Production of 1-alkyl-5-nitroimidazoles
  申请人：BASF Aktiengesellschaft

  公开号：US04021442A1

  公开（公告）日：1977-05-03

  1-Alkyl-5-nitroimidazoles are prepared by reacting a 5-nitroimidazole with an alkylating agent in the presence of an aliphatic carboxylic acid. The products are intermediates for the production of dyes, textiles auxiliaries and insecticides.

  1-烷基-5-硝基咪唑是通过在脂肪族羧酸存在下，将5-硝基咪唑与烷基化剂反应制备而成。这些产物是染料、纺织助剂和杀虫剂生产的中间体。
• [EN] TARGETED THERAPEUTICS<br/>[FR] THÉRAPEUTIQUE CIBLÉE
  申请人：SYNTA PHARMACEUTICALS CORP

  公开号：WO2015038649A1

  公开（公告）日：2015-03-19

  The present invention provides pharmacological compounds including an effector moiety conjugated to a binding moiety that directs the effector moiety to a biological target of interest. Likewise, the present invention provides compositions, kits, and methods (e.g., therapeutic, diagnostic, and imaging) including the compounds. The compounds can be described as a protein interacting binding moiety-drug conjugate (SDC-TRAP) compounds, which include a protein interacting binding moiety and an effector moiety. For example, in certain embodiments directed to treating cancer, the SDC-TRAP can include an Hsp90 inhibitor conjugated to a cytotoxic agent as the effector moiety.

  本发明提供了包括与将效应子导向至感兴趣的生物靶点的结合基团共轭的药理化合物。同样，本发明提供了包括这些化合物的组合物、试剂盒和方法（例如治疗、诊断和成像）。这些化合物可以被描述为蛋白质相互作用结合基团-药物共轭（SDC-TRAP）化合物，其中包括蛋白质相互作用结合基团和效应子。例如，在针对治疗癌症的某些实施方式中，SDC-TRAP可以包括Hsp90抑制剂共轭到细胞毒性药剂作为效应子。
• [EN] SILANOL BASED THERAPEUTIC PAYLOADS<br/>[FR] CHARGES UTILES THÉRAPEUTIQUES À BASE DE SILANOL
  申请人：BLINKBIO INC

  公开号：WO2017214491A1

  公开（公告）日：2017-12-14

  Described herein in part are silanol based therapeutic payloads comprising a silanol terminus, a divalent spacer moiety, and a drug moiety capable of effecting a target cell or tissue.

  本文部分描述了基于硅醇的治疗载荷，包括硅醇末端、二价间隔基团和能够影响靶细胞或组织的药物基团。
• Multi-functional ionic liquid compositions for overcoming polymorphism and imparting improved properties for active pharmaceutical, biological, nutritional, and energetic ingredients
  申请人：Rogers D. Robin

  公开号：US20070093462A1

  公开（公告）日：2007-04-26

  Disclosed are ionic liquids and methods of preparing ionic liquid compositions of active pharmaceutical, biological, nutritional, and energetic ingredients. Also disclosed are methods of using the compositions described herein to overcome polymorphism, overcome solubility and delivery problems, to control release rates, add functionality, enhance efficacy (synergy), and improve ease of use and manufacture.

  揭示了离子液体及制备活性药物、生物、营养和能量成分的离子液体组合物的方法。还揭示了利用本文描述的组合物的方法，以克服多型性、克服溶解度和输送问题、控制释放速率、增加功能性、增强功效（协同作用）以及改善易用性和制造工艺。

表征谱图