摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

(Z)-3-氯-3-(4-甲氧基苯基)丙烯腈 | 874479-16-0

中文名称
(Z)-3-氯-3-(4-甲氧基苯基)丙烯腈
中文别名
——
英文名称
(Z)-3-chloro-3-(4-methoxyphenyl)-2-propenenitrile
英文别名
(Z)-3-Chloro-3-(4-methoxyphenyl)acrylonitrile;(Z)-3-chloro-3-(4-methoxyphenyl)prop-2-enenitrile
(Z)-3-氯-3-(4-甲氧基苯基)丙烯腈化学式
CAS
874479-16-0
化学式
C10H8ClNO
mdl
——
分子量
193.633
InChiKey
PRZFNAAMKVRGRG-POHAHGRESA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

物化性质

  • 沸点:
    335℃
  • 密度:
    1.191
  • 闪点:
    157℃

计算性质

  • 辛醇/水分配系数(LogP):
    2.5
  • 重原子数:
    13
  • 可旋转键数:
    2
  • 环数:
    1.0
  • sp3杂化的碳原子比例:
    0.1
  • 拓扑面积:
    33
  • 氢给体数:
    0
  • 氢受体数:
    2

SDS

SDS:bcdeda075a566b5b10bad0f1a089d391
查看

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : (Z)-3-Chloro-3-(4-Methoxyphenyl)Acrylonitrile
: JRD0333
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.


SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral (Category 3), H301
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
T Toxic R25
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal word Danger
Hazard statement(s)
Toxic if swallowed.
Precautionary statement(s)
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/
physician.
Supplemental Hazard none
Statements
Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

SECTION 3: Composition/information on ingredients
Substances
Molecular weight : 193,63 g/mol
Hazardous ingredients according to Regulation (EC) No 1272/2008
Component Classification Concentration
(Z)-3-Chloro-3-(4-Methoxyphenyl)Acrylonitrile
Acute Tox. 3; H301 <= 100 %
Hazardous ingredients according to Directive 1999/45/EC
Component Classification Concentration
(Z)-3-Chloro-3-(4-Methoxyphenyl)Acrylonitrile
T, R25 <= 100 %
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
No data available

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Nature of decomposition products not known.
Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
No data available

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Wear respiratory protection. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Storage class (TRGS 510): Non-combustible, acute toxic Cat.3 / toxic hazardous materials or hazardous
materials causing chronic effects
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling
the product.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
respirator type N99 (US) or type P2 (EN 143) respirator cartridges as a backup to engineering
controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
respirators and components tested and approved under appropriate government standards such
as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour No data available
c) Odour Threshold No data available
d) pH No data available
e) Melting point/freezing No data available
point
f) Initial boiling point and No data available
boiling range
g) Flash point No data available
h) Evaporation rate No data available
i) Flammability (solid, gas) No data available
j) Upper/lower No data available
flammability or
explosive limits
k) Vapour pressure No data available
l) Vapour density No data available
m) Relative density No data available
n) Water solubility No data available
o) Partition coefficient: n- No data available
octanol/water
p) Auto-ignition No data available
temperature
q) Decomposition No data available
temperature
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
Other safety information
No data available

SECTION 10: Stability and reactivity
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
No data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
In the event of fire: see section 5

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

SECTION 12: Ecological information
Toxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other adverse effects
No data available

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

SECTION 14: Transport information
UN number
ADR/RID: 2811 IMDG: 2811 IATA: 2811
UN proper shipping name
ADR/RID: TOXIC SOLID, ORGANIC, N.O.S. ((Z)-3-Chloro-3-(4-Methoxyphenyl)Acrylonitrile)
IMDG: TOXIC SOLID, ORGANIC, N.O.S. ((Z)-3-Chloro-3-(4-Methoxyphenyl)Acrylonitrile)
IATA: Toxic solid, organic, n.o.s. ((Z)-3-Chloro-3-(4-Methoxyphenyl)Acrylonitrile)
Transport hazard class(es)
ADR/RID: 6.1 IMDG: 6.1 IATA: 6.1
Packaging group
ADR/RID: III IMDG: III IATA: III
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
No data available

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
No data available
Chemical Safety Assessment


SECTION 16 - ADDITIONAL INFORMATION
N/A

上下游信息

  • 上游原料
    中文名称 英文名称 CAS号 化学式 分子量

反应信息

  • 作为反应物:
    描述:
    (Z)-3-氯-3-(4-甲氧基苯基)丙烯腈sodium methylate三乙胺 作用下, 以 四氢呋喃甲醇 为溶剂, 反应 18.0h, 生成
    参考文献:
    名称:
    Discovery and SAR of a Novel Selective and Orally Bioavailable Nonpeptide Classical Competitive Inhibitor Class of Protein-Tyrosine Phosphatase 1B
    摘要:
    Reversible phosphorylation and dephosphorylation of key proteins on tyrosine residues are important parts of intracellular signaling triggered by hormones and other agents. Recent knock-out studies in mice have identified PTP1B as a potential target for the treatment of diabetes and obesity. As a consequence, a number of academic and industrial groups are aggressively pursuing the development of selective PTP1B inhibitors. In addition, other protein-tyrosine phosphatases (PTPs) appear to be critically involved in major diseases such as cancer and autoimmunity. Given the diversity of PTPs and their potential as drug targets in different diseases, we have taken a broad approach to develop active site-directed selective inhibitors of specific members of this family of enzymes. Using a high throughput screening, we have previously identified 2-(oxalylamino)benzoic acid 3a as a relatively weak but classical competitive inhibitor of several PTPs.(4) On the basis of our early studies, indicating that 3a might be used as a starting point for the synthesis of selective PTP inhibitors, we now present our efforts in expansion of this concept and provide here a number of new chemical scaffolds for the development of inhibitors of different members of the PTP family. Although the core structure of these inhibitors is charged, good oral bioavailability has been observed in rat for some compounds. Furthermore, we have observed enhancement of 2-deoxy-glucose accumulation in C2C12 cells with prodrug analogues.
    DOI:
    10.1021/jm0209026
  • 作为产物:
    描述:
    3-chloro-3-(4-methoxyphenyl)acrylaldehyde 作用下, 以 二氯甲烷 为溶剂, 反应 0.75h, 以92%的产率得到(Z)-3-氯-3-(4-甲氧基苯基)丙烯腈
    参考文献:
    名称:
    丙烯腈和3-氯丙烯腈的无过渡金属方法
    摘要:
    公开了一种无过渡金属的,简便有效的一锅操作方案,用于从易于获得的3-氯丙烯醛中合成丙腈。还优化了反应条件,以专门形成和分离3-氯丙烯腈,这通常是重要的组成部分,并且是丙腈合成的中间体。该方法的特点是使用无毒的试剂,较温和,无金属且经济上良好的反应条件,避免了苛刻的脱水步骤,同时获得了优异的收率。
    DOI:
    10.1002/adsc.201501103
点击查看最新优质反应信息

文献信息

  • Synthesis of Thiophene Analogues of the Tacrine Series
    作者:Gilbert Kirsch、David Thomae、Pierre Seck
    DOI:10.1055/s-2007-965944
    日期:2007.4
    3-Amino-2-cyanothiophenes condensed with cyclanones and afforded analogues of Velnacrine in two or three steps. Condensation under Friedlander’s conditions gave tacrine analogues in one step.
    3-氨基-2-氰基噻吩与环烷酮缩合,分两步或三步得到维纳克林的类似物。在弗里德兰德条件下的缩合一步得到了他克林类似物。
  • Synthesis and Biological Evaluation of 2-(3‘,4‘,5‘-Trimethoxybenzoyl)-3-Amino 5-Aryl Thiophenes as a New Class of Tubulin Inhibitors
    作者:Romeo Romagnoli、Pier Giovanni Baraldi、Vincent Remusat、Maria Dora Carrion、Carlota Lopez Cara、Delia Preti、Francesca Fruttarolo、Maria Giovanna Pavani、Mojgan Aghazadeh Tabrizi、Manlio Tolomeo、Stefania Grimaudo、Jan Balzarini、Mary Ann Jordan、Ernest Hamel
    DOI:10.1021/jm060804a
    日期:2006.10.1
    2-(3',4',5'-Trimethoxybenzoyl)-3-amino-5-aryl/heteroaryl thiophene derivatives were synthesized and evaluated for antiproliferative activity, inhibition of tubulin polymerization, and cell cycle effects. SARs were elucidated with various substitutions on the aryl moiety 5-position of the thienyl ring. Substituents at the para-position of the 5-phenyl group showed antiproliferative activity in the order
    合成2-(3',4',5'-三甲氧基苯甲酰基)-3-氨基-5-芳基/杂芳基噻吩衍生物并评估其抗增殖活性,抑制微管蛋白聚合和细胞周期效应。用噻吩基环的芳基部分5-位上的各种取代基阐明了SAR。5-苯基对位的取代基显示出抗增殖活性,顺序为F = CH(3)> OCH(3)= Br = NO(2)> CF(3)= I> OEt。这些化合物中的几种导致HL-60细胞停滞在细胞周期的G2 / M期并诱导凋亡。
  • Thioether derivatives as protein kinase inhibitors
    申请人:KTB Tumorforschungsgesellschaft mbH
    公开号:EP2733146A1
    公开(公告)日:2014-05-21
    The present invention relates to thioether derivatives as protein kinase inhibitors, which are useful for the treatment, relieve and/or prevention of diseases associated with abnormal and hyperproliferation of cells in a mammal, especially humans, and which are particularly useful for the treatment of all forms of cancer.
    本发明涉及硫醚衍生物作为蛋白激酶抑制剂,其对于哺乳动物,尤其是人类中细胞异常和过度增殖所致的疾病的治疗、缓解和/或预防非常有用,特别适用于治疗所有形式的癌症。
  • One-Pot Synthesis of 7-Hydroxythieno[3,2-<i>b</i>]pyridin-5(4<i>H</i>)-ones
    作者:Gilbert Kirsch、David Thomae、Pierre Seck、Thomas Kaminski
    DOI:10.1055/s-2007-983757
    日期:——
    Substituted 7-hydroxythieno[3,2-b]pyridin-5(4H)-ones were prepared from the corresponding β-chloropropenonitriles in one step.
    取代的 7-羟基噻吩并[3,2-b]吡啶-5(4H)-酮由相应的δ-氯丙烯腈一步制备而成。
  • Glycogen Phosphorylase Inhibitor Compounds and Pharmaceutical Compositions Thereof
    申请人:Evans Karen
    公开号:US20070249670A1
    公开(公告)日:2007-10-25
    The invention relates to glycogen phosphorylase inhibitor compounds, pharmaceutical compositions of these compounds, methods of treatment using the pharmaceutical compositions to treat diabetes, conditions associated with diabetes, and/or tissue ischemia, including myocardial ischemia, and processes for making the compounds.
    本发明涉及糖原磷酸化酶抑制剂化合物、这些化合物的药物组合物、使用这些药物组合物治疗糖尿病、与糖尿病相关的疾病和/或组织缺血,包括心肌缺血的方法,以及制备这些化合物的过程。
查看更多