1-(3-硝基苯基磺酰)吡咯啉 | 91619-30-6

• 物质功能分类: 原料药 - 人工合成抗感染类药 - 磺胺类药及增效剂
• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 中文名称: 1-(3-硝基苯基磺酰)吡咯啉
• 中文别名: 1-(3-硝基苯基磺酰基)吡咯烷
• 英文名称: 1-(3-nitrophenylsulfonyl)pyrrolidine
• 英文别名: 1-(3-nitrophenyl)sulfonylpyrrolidine
• CAS: 91619-30-6
• 化学式: C₁₀H₁₂N₂O₄S
• mdl: MFCD02039471
• 分子量: 256.282
• InChiKey: BUOYKAGBVRMTEO-UHFFFAOYSA-N

物化性质

• 熔点：
  99-100 °C(Solv: ethanol (64-17-5))
• 沸点：
  417.5±47.0 °C(Predicted)
• 密度：
  1.432±0.06 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  1.4
• 重原子数：
  17
• 可旋转键数：
  2
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.4
• 拓扑面积：
  91.6
• 氢给体数：
  0
• 氢受体数：
  5

安全信息

• 海关编码：
  2935009090

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : 1-((3-NITROPHENYL)SULFONYL)PYRROLIDINE
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No. : 91619-30-6

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Skin irritation (Category 2), H315
Eye irritation (Category 2), H319
Specific target organ toxicity - single exposure (Category 3), H335
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Xi Irritant R36/37/38
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal word Warning
Hazard statement(s)
Causes skin irritation.
Causes serious eye irritation.
May cause respiratory irritation.
Precautionary statement(s)
Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazard none
Statements
Other hazards - none

---

SECTION 3: Composition/information on ingredients
Substances
Formula : C10H12N2O4S
Molecular Weight : 256,28 g/mol
CAS-No. : 91619-30-6
Hazardous ingredients according to Regulation (EC) No 1272/2008
Component Classification Concentration
1-((3-NITROPHENYL)SULFONYL)PYRROLIDINE
Skin Irrit. 2; Eye Irrit. 2; STOT -
SE 3; H315, H319, H335
Hazardous ingredients according to Directive 1999/45/EC
Component Classification Concentration
1-((3-NITROPHENYL)SULFONYL)PYRROLIDINE
Xi, R36/37/38 -
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, nitrogen oxides (NOx), Sulphur oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.Normal measures for preventive fire
protection.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Specific end use(s)
A part from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher
level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges.
Use respirators and components tested and approved under appropriate government standards
such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing no data available
point
f) Initial boiling point and no data available
boiling range
g) Flash point no data available
h) Evapouration rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density no data available
n) Water solubility no data available
o) Partition coefficient: n- log Pow: 1,253
octanol/water
p) Auto-ignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
Specific target organ toxicity - single exposure
no data available
Inhalation - May cause respiratory irritation.
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

---

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
professional waste disposal service to dispose of this material. Dissolve or mix the material with a
combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
no data available

---

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
no data available
Chemical Safety Assessment

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  1-(3-硝基苯基磺酰)吡咯啉 在 palladium 10% on activated carbon 、 氢气 作用下， 以 乙酸乙酯 为溶剂， 反应 18.0h， 以93%的产率得到3-(1-吡咯基磺酰)苯胺
  参考文献：
  名称：

  高通量筛选和细胞外相关激酶5（ERK5）抑制剂的命中验证

  摘要：

  细胞外相关激酶5（ERK5）是癌症治疗的有希望的目标。基于IMAP FP渐进结合系统，针对ERK5开发了高通量筛选，并用于从57 617种化合物的文库中鉴定命中。筛选命中明显有四个不同的化学系列。命中的重新合成和重新测定表明，一个系列没有返回活性化合物，而三个系列返回了活性命中。结构活性研究表明，4-苯甲酰基吡咯-2-羧酰胺药效团具有很好的进一步开发潜力。鉴定了最小的激酶结合药效基团，关键实例证明了对ERK5的选择性优于p38α激酶。

  DOI：

  10.1021/acscombsci.5b00155
• 作为产物：
  描述：

  四氢吡咯 、 3-硝基苯磺酰氯 在 三乙胺 作用下， 以 二氯甲烷 为溶剂， 反应 3.0h， 以89%的产率得到1-(3-硝基苯基磺酰)吡咯啉
  参考文献：
  名称：

  高通量筛选和细胞外相关激酶5（ERK5）抑制剂的命中验证

  摘要：

  细胞外相关激酶5（ERK5）是癌症治疗的有希望的目标。基于IMAP FP渐进结合系统，针对ERK5开发了高通量筛选，并用于从57 617种化合物的文库中鉴定命中。筛选命中明显有四个不同的化学系列。命中的重新合成和重新测定表明，一个系列没有返回活性化合物，而三个系列返回了活性命中。结构活性研究表明，4-苯甲酰基吡咯-2-羧酰胺药效团具有很好的进一步开发潜力。鉴定了最小的激酶结合药效基团，关键实例证明了对ERK5的选择性优于p38α激酶。

  DOI：

  10.1021/acscombsci.5b00155

文献信息

• Synthesis and Anticandidal Activity of Azole-Containing Sulfonamides
  作者：Amjad M. Qandil、Mohammad A. Hassan、Nizar A. Al-Shar'i

  DOI：10.1002/ardp.200700125

  日期：2008.2

  aromatic ring. Secondary sulfonamides, 5l, 5m, and 5n showed activities that were proportional to their lipophilicity. The activities of N‐aryl‐substituted derivatives 5j, 5k, 5l, 5m, 5n, and 6j were also proportional to their lipophilicity. Halogenation enhanced the activity as a result of improvement of lipophilicity. The presence of two imidazole or triazole rings in the same compound did not show

  已经合成了 25 种含有一个咪唑或三唑环，或两个咪唑或三唑环的苯磺酰胺，并作为抗念珠菌剂进行了评估。活性最强的化合物为 5c、6b、6c、6e 和 17b，根据临床分离株的不同，MIC 值为 4.55-24.39 mM。将咪唑与三唑衍生物进行比较并没有显示出对活性的明显影响。考虑到含有 N-苄基的化合物具有额外的芳环，它们也没有显示出明确的活性证据。二级磺胺类药物 5l、5m 和 5n 显示出与其亲脂性成正比的活性。N-芳基取代衍生物5j、5k、5l、5m、5n和6j的活性也与其亲脂性成正比。作为亲脂性改善的结果，卤化增强了活性。
• KEMPTER, G.;BEERBALK, H. -D., WISS. Z. PAED. HOCHSCH. K. LEBKNECHT POTSDAM, 1983, 27, N 1, 101-120
  作者：KEMPTER, G.、BEERBALK, H. -D.

  DOI：——

  日期：——
• High-Throughput Screening and Hit Validation of Extracellular-Related Kinase 5 (ERK5) Inhibitors
  作者：Stephanie M. Myers、Ruth H. Bawn、Louise C. Bisset、Timothy J. Blackburn、Betty Cottyn、Lauren Molyneux、Ai-Ching Wong、Celine Cano、William Clegg、Ross. W. Harrington、Hing Leung、Laurent Rigoreau、Sandrine Vidot、Bernard T. Golding、Roger J. Griffin、Tim Hammonds、David R. Newell、Ian R. Hardcastle

  DOI：10.1021/acscombsci.5b00155

  日期：2016.8.8

  The extracellular-related kinase 5 (ERK5) is a promising target for cancer therapy. A high-throughput screen was developed for ERK5, based on the IMAP FP progressive binding system, and used to identify hits from a library of 57 617 compounds. Four distinct chemical series were evident within the screening hits. Resynthesis and reassay of the hits demonstrated that one series did not return active

  细胞外相关激酶5（ERK5）是癌症治疗的有希望的目标。基于IMAP FP渐进结合系统，针对ERK5开发了高通量筛选，并用于从57 617种化合物的文库中鉴定命中。筛选命中明显有四个不同的化学系列。命中的重新合成和重新测定表明，一个系列没有返回活性化合物，而三个系列返回了活性命中。结构活性研究表明，4-苯甲酰基吡咯-2-羧酰胺药效团具有很好的进一步开发潜力。鉴定了最小的激酶结合药效基团，关键实例证明了对ERK5的选择性优于p38α激酶。