1-BOC-2-哌啶甲醛 | 157634-02-1

• 物质功能分类: 有机原料 - 杂环化合物
• 分子结构分类: 有机化合物 - 有机杂环化合物 - 哌啶类
• 中文名称: 1-BOC-2-哌啶甲醛
• 中文别名: N-BOC-2-哌啶甲醛；1-叔丁氧羰基哌啶-2-甲醛；1-叔丁氧羰基-2-哌啶甲醛；2-醛基哌啶-1-甲酸叔丁酯
• 英文名称: tert-butyl 2-formylpiperidine-1-carboxylate
• 英文别名: 1-N-Boc-2-piperidinecarbaldehyde；N-Boc-piperidine-2-carboxaldehyde；2-formyl-piperidine-1-carboxylic acid tert-butyl ester
• CAS: 157634-02-1
• 化学式: C₁₁H₁₉NO₃
• 分子量: 213.277
• InChiKey: KZNDGAGWQPGYTB-UHFFFAOYSA-N

物化性质

• 沸点：
  85-86°/0.06mm
• 密度：
  1.114±0.06 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  1.5
• 重原子数：
  15
• 可旋转键数：
  3
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.82
• 拓扑面积：
  46.6
• 氢给体数：
  0
• 氢受体数：
  3

安全信息

• 危险等级：
  IRRITANT
• 海关编码：
  2933399090
• 危险性防范说明：
  P280,P305+P351+P338,P310
• 危险性描述：
  H302,H315,H319,H332,H335
• 储存条件：
  -20°C，惰性气体氛围

SDS

Material Safety Data Sheet

---

Section 1. Identification of the substance
Product Name: 1-Boc-2-piperidinecarbaldehyde
Synonyms:

---

Section 2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.

---

Section 3. Composition/information on ingredients.
Ingredient name: 1-Boc-2-piperidinecarbaldehyde
CAS number: 157634-02-1

---

Section 4. First aid measures
Skin contact: Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact: Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion: Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

---

Section 5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

---

Section 6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution: Wear approved mask/respirator
Hand precaution: Wear suitable gloves/gauntlets
Skin protection: Wear suitable protective clothing
Eye protection: Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

---

Section 7. Handling and storage
Handling: This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Store in closed vessels.
Storage:

---

Section 8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

---

Section 9. Physical and chemical properties
Appearance: Not specified
Boiling point: No data
No data
Melting point:
Flash point: No data
Density: No data
Molecular formula: C11H19NO3
Molecular weight: 213.3

---

Section 10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides.

---

Section 11. Toxicological information
No data.

---

Section 12. Ecological information
No data.

---

Section 13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

---

Section 14. Transportation information
Non-harzardous for air and ground transportation.

---

Section 15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  1-BOC-2-哌啶甲醛 在 三氟乙酸 作用下， 以 二氯甲烷 为溶剂， 生成 2-vinylpiperidine
  参考文献：
  名称：

  金属碳烯化合物形成螺环铵盐的方法，导致制备中等大小的金刚烷环

  摘要：

  通过衍生自拴系的α-二重氮基部分的重氮分解的螺环铵叶立德的中间体，已经获得了一种新的方法来处理含氮杂环辛烯和含氮杂双环烯的底物。

  DOI：

  10.1016/0040-4039(96)00221-3
• 作为产物：
  描述：

  叔-丁基氯甲酸酯 在 二异丁基氢化铝 、 三乙胺 作用下， 以 正己烷 、 甲苯 为溶剂， 生成 1-BOC-2-哌啶甲醛
  参考文献：
  名称：

  Cycloadditions. 46. Thermally induced intramolecular oxime olefin cycloadditions leading to N-bridgehead systems. Stereochemistry and molecular mechanics calculations

  摘要：

  The intramolecular oxime olefin cycloaddition (IOOC) of proline and pipecolinic acid derivatives proceeds thermally with a high degree of stereoselectivity to provide a new route to functionalized pyrrolizidines, indolizidines, or quinolizidines. The ring closure proceeds with simultaneous stereoselective introduction of three or four stereocenters. Molecular mechanics calculations have been refined to accurately predict not only which stereoisomer is preferred but also the syn and anti coupling constants in these tricyclic molecules.

  DOI：

  10.1021/jo00008a038

文献信息

• Substituted Isoquinolinones and Quinazolinones
  申请人：BERGHAUSEN Joerg

  公开号：US20110230457A1

  公开（公告）日：2011-09-22

  The invention relates to substituted nitrogen containing bicyclic heterocycles of the formula (I) wherein Z is CH 2 or N—R 4 and X, R 1 , R 2 , R 4 , R 6 , R 7 and n are as defined in the description. Such compounds are suitable for the treatment of a disorder or disease which is mediated by the activity of MDM2 and/or MDM4, or variants thereof.

  这项发明涉及公式（I）中的取代氮含有的双环杂环化合物，其中Z为CH2或N—R4，X、R1、R2、R4、R6、R7和n的定义如描述中所述。这类化合物适用于治疗由MDM2和/或MDM4的活性介导的疾病或疾病变体。
• Pyridine- and Pyrimidinecarboxamides as CXCR2 Modulators
  申请人：Maeda Dean Y.

  公开号：US20100210593A1

  公开（公告）日：2010-08-19

  There is disclosed pyridine- and pyrimidinecarboxamide compounds useful as pharmaceutical agents, synthesis processes, and pharmaceutical compositions which include pyridine- and pyrimidinecarboxamides compounds. More specifically, there is disclosed a genus of CXCR2 inhibitor compounds that are useful for treating a variety of inflammatory and neoplastic disorders.

  披露了作为药物剂的吡啶和嘧啶羧酰胺化合物，合成过程以及包括吡啶和嘧啶羧酰胺化合物的药物组合物。更具体地，披露了一类CXCR2抑制剂化合物，可用于治疗各种炎症和肿瘤性疾病。
• 一种酰胺衍生物及其制备方法和在药学上的 应用
  申请人：四川海思科制药有限公司

  公开号：CN106928126B

  公开（公告）日：2019-12-20

  本发明提供了一种酰胺衍生物及其制备方法和在药学上的应用，其中该酰胺衍生物化合物选自以下等的结构之一，所述化合物可以用来制备局部麻醉或镇痛领域药物：
• Chemokine receptor binding heterocyclic compounds with enhanced efficacy
  申请人：——

  公开号：US20030220341A1

  公开（公告）日：2003-11-27

  The invention relates to heterocyclic compounds consisting of a core nitrogen atom surrounded by three pendant groups, wherein two of the three pendant groups are preferably benzimidazolyl methyl and tetrahydroquinolyl, and the third pendant group contains N and optionally contains additional rings. The compounds bind to chemokine receptors, including CXCR4 and CCR5, and demonstrate protective effects against infection of target cells by a human immunodeficiency virus (HIV).

  这项发明涉及由一个核心氮原子环绕着三个侧链基团的杂环化合物，其中三个侧链基团中的两个最好是苯并咪唑甲基和四氢喹啉基，第三个侧链基团含有N，并且可选地含有额外的环。这些化合物与趋化因子受体结合，包括CXCR4和CCR5，并且表现出对人类免疫缺陷病毒（HIV）感染靶细胞的保护作用。
• Total Synthesis of (+)-Aloperine. Use of a Nitrogen-Bound Silicon Tether in an Intramolecular Diels−Alder Reaction
  作者：Arthur D. Brosius、Larry E. Overman、Lothar Schwink

  DOI：10.1021/ja983013+

  日期：1999.2.1

  The central element of the synthetic strategy is an intramolecular Diels−Alder reaction in which the cycloaddends are tethered by a N-silylamine linkage. The total synthesis of 1 proceeds from commercially available 3-hydroxypiperidine hydrochloride (54) and (R)-pipecolinic acid (35) by way of nine isolated and purified intermediates. The synthesis is sufficiently efficient that gram quantities of (+)-aloperine

  报道了 aperine (1)、N-methylaloperine (2) 和 N-allylaloperine (3) 的对映选择性全合成。合成策略的核心要素是分子内 Diels-Alder 反应，其中环加数由 N-甲硅烷基胺键连接。1 的全合成从市售的 3-羟基哌啶盐酸盐 (54) 和 (R)-哌啶酸 (35) 通过九个分离和纯化的中间体进行。该合成足够有效，可以很容易地制备克量的 (+)-aloperine (1)。早期的探索性研究还引入了一种方便的方法，将环加成伙伴与磺酰胺单元相连，以实现乙烯基磺酰胺的分子内 Diels-Alder 环加成：45 → 46。