3-(吗啉-4-羰基)苯基硼酸 | 723281-55-8

• 物质功能分类: 化学试剂 - 有机试剂 - 硼酸
• 分子结构分类: 有机化合物 - 有机杂环化合物 - 恶嗪烷类
• 中文名称: 3-(吗啉-4-羰基)苯基硼酸
• 中文别名: 3-(吗啉-4-羰基)苯硼酸；3-(4-吗啉基羰基)苯硼酸
• 英文名称: (3-(morpholine-4-carbonyl)phenyl)boronic acid
• 英文别名: [3-(morpholin-4-ylcarbonyl)phenyl]boronic acid；3-(Morpholine-4-carbonyl)phenylboronic acid；[3-(morpholine-4-carbonyl)phenyl]boronic acid
• CAS: 723281-55-8
• 化学式: C₁₁H₁₄BNO₄
• mdl: MFCD04115687
• 分子量: 235.047
• InChiKey: DRZFURCXDFRZNR-UHFFFAOYSA-N

物化性质

• 熔点：
  124-130°C
• 沸点：
  496.6±55.0 °C(Predicted)
• 密度：
  1.30±0.1 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  0.44
• 重原子数：
  17
• 可旋转键数：
  2
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.363
• 拓扑面积：
  70
• 氢给体数：
  2
• 氢受体数：
  4

安全信息

• 危险品标志：
  Xi
• 安全说明：
  S26,S36/37/39
• 危险类别码：
  R36/37/38
• 海关编码：
  2934999090
• 危险性防范说明：
  P261,P305+P351+P338
• 危险性描述：
  H302,H315,H319,H335
• 储存条件：
  请保持冷静。

SDS

Material Safety Data Sheet

---

Section 1. Identification of the substance
3-(Morpholine-4-carbonyl)phenylboronic acid
Product Name:
Synonyms: 4-(3-Boronobenzoyl)morpholine; (3-boronophenyl)(morpholin-4-yl)methanone

---

Section 2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.
H315: Causes skin irritation
H319: Causes serious eye irritation
H335: May cause respiratory irritation
P261: Avoid breathing dust/fume/gas/mist/vapours/spray
Wear protective gloves/protective clothing/eye protection/face protection
P280:
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present
and easy to do – continue rinsing
P304+P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing
P405: Store locked up

---

Section 3. Composition/information on ingredients.
3-(Morpholine-4-carbonyl)phenylboronic acid
Ingredient name:
CAS number: 723281-55-8

---

Section 4. First aid measures
Immediately wash skin with copious amounts of water for at least 15 minutes while removing
Skin contact:
contaminated clothing and shoes. If irritation persists, seek medical attention.
Eye contact: Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.
Ingestion:

---

Section 5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

---

Section 6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution: Wear approved mask/respirator
Hand precaution: Wear suitable gloves/gauntlets
Skin protection: Wear suitable protective clothing
Eye protection: Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

---

Section 7. Handling and storage
Handling: This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Storage: Store in closed vessels.

---

Section 8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

---

Section 9. Physical and chemical properties
Not specified
Appearance:
Boiling point: No data
Melting point: No data
Flash point: No data
Density: No data
Molecular formula: C11H14BNO4
Molecular weight: 235.0

---

Section 10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides.

---

Section 11. Toxicological information
No data.

---

Section 12. Ecological information
No data.

---

Section 13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

---

Section 14. Transportation information
Non-harzardous for air and ground transportation.

---

Section 15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  3-(吗啉-4-羰基)苯基硼酸 在 copper(II) choride dihydrate 、 sodium carbonate 作用下， 以 甲醇 为溶剂， 反应 0.25h， 以88%的产率得到[1,1'-biphenyl]-3,3'-diylbis(morpholinomethanone)
  参考文献：
  名称：

  芳基硼酸的快速无配体碱加速铜催化均偶联反应

  摘要：

  介绍了一种快速、无配体、碱加速、铜催化的（杂）芳基硼酸的均偶联反应。CuCl2·2H2O/Na2CO3 基催化剂能够通过均偶联过程在 15 分钟内以中等至极好的产率 (72-97%) 形成双（杂）芳基化合物。提出了铜催化碱加速反应的机理。

  DOI：

  10.1055/s-0036-1588361

文献信息

• 1-Amino 1H-imidazoquinolines
  申请人：Griesgraber W. George

  公开号：US20050054640A1

  公开（公告）日：2005-03-10

  1-Amino 1H-imidazoquinoline compounds, pharmaceutical compositions containing the compounds, intermediates, and methods of making and methods of use of these compounds as immunomodulators, for modulating cytokine biosynthesis in animals and in the treatment of diseases including viral and neoplastic diseases are disclosed.

  1-氨基1H-咪唑喹啉化合物，含有该化合物的药物组合物，中间体，以及制备这些化合物的方法和将这些化合物用作免疫调节剂的方法，用于调节动物体内细胞因子生物合成，并用于治疗包括病毒性和肿瘤性疾病在内的疾病。
• Pyrrolo-pyridine kinase modulators
  申请人：Arnold D. William

  公开号：US20060030583A1

  公开（公告）日：2006-02-09

  The present invention provides novel pyrrolo-pyridine kinase modulators and methods of using the novel pyrrolo-pyridine kinase modulators to treat diseases mediated by kinase activity.

  本发明提供了新型吡咯-吡啶激酶调节剂以及利用这些新型吡咯-吡啶激酶调节剂治疗由激酶活性介导的疾病的方法。
• [EN] 1-AMINO 1-H-IMIDAZOQUINOLINES<br/>[FR] 1-AMINO 1- H -IMIDAZOQUINOLINES
  申请人：3M INNOVATIVE PROPERTIES CO

  公开号：WO2006028451A1

  公开（公告）日：2006-03-16

  1-Amino 1H-imidazoquinoline compounds, pharmaceutical compositions containing the compounds, intermediates, and methods of making and methods of use of these compounds as immunomodulators, for modulating cytokine biosynthesis in animals and in the treatment of diseases including viral and neoplastic diseases are disclosed.

  1-氨基1H-咪唑喹啉化合物，含有该化合物的药物组合物，中间体，以及制备这些化合物的方法和将这些化合物用作免疫调节剂的方法，用于调节动物体内细胞因子生物合成，并用于治疗包括病毒性和肿瘤性疾病在内的疾病。
• Substituted Indoles
  申请人：AbbVie Inc.

  公开号：US20170174688A1

  公开（公告）日：2017-06-22

  The invention provides for compounds of formula (I) wherein R 1 , R 2 , R 3 , R 4 , R 5 , and R 6 have any of the values defined in the specification, and pharmaceutically acceptable salts thereof, that are useful as agents in the treatment of diseases and conditions mediated and modulated by SUV420H1. Also provided are pharmaceutical compositions comprised of one or more compounds of formula (I).

  该发明提供了以下式（I）的化合物 其中R 1 ，R 2 ，R 3 ，R 4 ，R 5 和R 6 具有规范中定义的任何值，以及其药学上可接受的盐，这些化合物在治疗由SUV420H1介导和调节的疾病和症状中作为药剂是有用的。还提供了由一个或多个式（I）化合物组成的药物组合物。
• [EN] SELECTIVE ESTROGEN RECEPTOR MODULATORS<br/>[FR] MODULATEURS SELECTIFS DU RECEPTEUR DES OESTROGENES
  申请人：LILLY CO ELI

  公开号：WO2005073205A1

  公开（公告）日：2005-08-11

  The present invention relates to a selective estrogen receptor modulators of formula I (I); or a pharmaceutical acid addition salt thereof; and of formula II (II); or a pharmaceutical salt thereof; useful, e.g., for treating endometriosis and/or uterine leiomyoma/leiomyomata.

  本发明涉及一种化学式I（I）的选择性雌激素受体调节剂；或其药用酸盐；以及化学式II（II）的化合物；或其药用盐；可用于治疗子宫内膜异位症和/或子宫平滑肌瘤。