N-(4-溴苯基)-N-甲基乙酰胺 | 50438-47-6

• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 中文名称: N-(4-溴苯基)-N-甲基乙酰胺
• 英文名称: N-(4-bromophenyl)-N-methylacetamide
• 英文别名: 4-bromo-N-methylacetanilide
• CAS: 50438-47-6
• 化学式: C₉H₁₀BrNO
• mdl: MFCD00094195
• 分子量: 228.088
• InChiKey: JDWFXKUASRMYEO-UHFFFAOYSA-N

计算性质

• 辛醇/水分配系数(LogP)：
  1.7
• 重原子数：
  12
• 可旋转键数：
  1
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.22
• 拓扑面积：
  20.3
• 氢给体数：
  0
• 氢受体数：
  1

安全信息

• 危险等级：
  IRRITANT
• 海关编码：
  2924299090
• 危险性防范说明：
  P264,P280,P302+P352,P337+P313,P305+P351+P338,P362+P364,P332+P313
• 危险性描述：
  H315,H319

SDS

Version 1.0
Regulation (EC) No 1907/2006

---

1 - Product and Company Information

---

Product Name 4'-BROMO-N-METHYLACETANILIDE - 50 MG

---

2 - Hazards Identification

---

SPECIAL INDICATION OF HAZARDS TO HUMANS AND THE ENVIRONMENT
Not hazardous according to Directive 67/548/EEC.

---

3 - Composition/Information on Ingredients

---

Product Name CAS # EC no Annex I
Index Number
4'-BROMO-N-METHYLACETANILIDE 50438-47-6 None None
Formula C9H10BRNO
Molecular Weight 228,0900 AMU

---

4 - First Aid Measures

---

AFTER INHALATION
If inhaled, remove to fresh air. If breathing becomes difficult,
call a physician.
AFTER SKIN CONTACT
In case of contact, immediately wash skin with soap and copious
amounts of water.
AFTER EYE CONTACT
In case of contact with eyes, flush with copious amounts of
water for at least 15 minutes. Assure adequate flushing by
separating the eyelids with fingers. Call a physician.
AFTER INGESTION
If swallowed, wash out mouth with water provided person is
conscious. Call a physician.

---

5 - Fire Fighting Measures

---

EXTINGUISHING MEDIA
ALDRICH www.molbase.com
Suitable: Water spray. Carbon dioxide, dry chemical powder, or
appropriate foam.
SPECIAL RISKS
Specific Hazard(s): Emits toxic fumes under fire conditions.
SPECIAL PROTECTIVE EQUIPMENT FOR FIREFIGHTERS
Wear self-contained breathing apparatus and protective clothing
to prevent contact with skin and eyes.

---

6 - Accidental Release Measures

---

PROCEDURE(S) OF PERSONAL PRECAUTION(S)
Exercise appropriate precautions to minimize direct contact with
skin or eyes and prevent inhalation of dust.
METHODS FOR CLEANING UP
Sweep up, place in a bag and hold for waste disposal. Avoid
raising dust. Ventilate area and wash spill site after material
pickup is complete.

---

7 - Handling and Storage

---

HANDLING
Directions for Safe Handling: Avoid inhalation. Avoid contact
with eyes, skin, and clothing. Avoid prolonged or repeated
exposure.
STORAGE
Conditions of Storage: Keep tightly closed.

---

8 - Exposure Controls / Personal Protection

---

ENGINEERING CONTROLS
Safety shower and eye bath. Mechanical exhaust required.
GENERAL HYGIENE MEASURES
Wash thoroughly after handling.
PERSONAL PROTECTIVE EQUIPMENT
Respiratory Protection: Use respirators and components tested and
approved under appropriate government standards such as NIOSH (US)
or CEN (EU). Respiratory protection is not required. Where
protection from nuisance levels of dusts are desired, use type N95
(US) or type P1 (EN 143) dust masks.
Hand Protection: Protective gloves.
Eye Protection: Chemical safety goggles.

---

9 - Physical and Chemical Properties

---

Appearance Physical State: Solid
Property Value At Temperature or Pressure
pH N/A
BP/BP Range N/A
MP/MP Range N/A
Flash Point N/A
Flammability N/A
Autoignition Temp N/A
ALDRICH www.molbase.com
Oxidizing Properties N/A
Explosive Properties N/A
Explosion Limits N/A
Vapor Pressure N/A
Partition Coefficient Log Kow: 2,189
Viscosity N/A
Vapor Density N/A
Saturated Vapor Conc. N/A
Evaporation Rate N/A
Bulk Density N/A
Decomposition Temp. N/A
Solvent Content N/A
Water Content N/A
Surface Tension N/A
Conductivity N/A
Miscellaneous Data N/A
Solubility N/A

---

10 - Stability and Reactivity

---

STABILITY
Stable: Stable.
Materials to Avoid: Strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS
Hazardous Decomposition Products: Carbon monoxide, Carbon dioxide,
Nitrogen oxides, Hydrogen bromide gas.
HAZARDOUS POLYMERIZATION
Hazardous Polymerization: Will not occur

---

11 - Toxicological Information

---

SIGNS AND SYMPTOMS OF EXPOSURE
To the best of our knowledge, the chemical, physical, and
toxicological properties have not been thoroughly investigated.
ROUTE OF EXPOSURE
Skin Contact: May cause skin irritation.
Skin Absorption: May be harmful if absorbed through the skin.
Eye Contact: May cause eye irritation.
Inhalation: May be harmful if inhaled. Material may be
irritating to mucous membranes and upper respiratory tract.
Ingestion: May be harmful if swallowed.

---

12 - Ecological Information

---

No data available.

---

13 - Disposal Considerations

---

SUBSTANCE DISPOSAL
Contact a licensed professional waste disposal service to dispose
of this material. Dissolve or mix the material with a combustible
solvent and burn in a chemical incinerator equipped with an
afterburner and scrubber. Observe all federal, state, and local
environmental regulations.

---

14 - Transport Information

---

ALDRICH www.molbase.com
RID/ADR
Non-hazardous for road transport.
IMDG
Non-hazardous for sea transport.
IATA
Non-hazardous for air transport.

---

15 - Regulatory Information

---

Not hazardous according to Directive 67/548/EEC.
Caution: Substance not yet fully tested (EU).

---

16 - Other Information

---

WARRANTY
The above information is believed to be correct but does not
purport to be all inclusive and shall be used only as a guide. The
information in this document is based on the present state of our
knowledge and is applicable to the product with regard to
appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Inc.,
shall not be held liable for any damage resulting from handling or
from contact with the above product. See reverse side of invoice
or packing slip for additional terms and conditions of sale.
Copyright 2010 Co. License granted to make
unlimitedpaper copies for internal use only.
DISCLAIMER
For R&D use only. Not for drug, household or other uses.
ALDRICH www.molbase.com

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  N-(4-溴苯基)-N-甲基乙酰胺 在 tris-(dibenzylideneacetone)dipalladium(0) 、 盐酸羟胺 、 sodium acetate 、 R-(+)-1,1'-联萘-2,2'-双二苯膦 、 sodium t-butanolate 作用下， 以 甲醇 、 甲苯 为溶剂， 反应 13.0h， 生成 4′-氨基-N-甲基乙酰苯胺
  参考文献：
  名称：

  Silver-Mediated Trifluoromethylation of Aryldiazonium Salts: Conversion of Amino Group into Trifluoromethyl Group

  摘要：

  A novel strategy for aromatic trifluoromethylation by converting aromatic amino group into CF3 group is reported herein. This method, which can be considered as trifluoromethylation variation of the classic Sandmeyer reaction, uses readily available aromatic amines as starting materials and is performed under mild conditions.

  DOI：

  10.1021/ja4056239
• 作为产物：
  描述：

  4-溴苯胺 在 sodium hydride 、 三乙胺 作用下， 以 四氢呋喃 、 N,N-二甲基甲酰胺 为溶剂， 反应 18.58h， 生成 N-(4-溴苯基)-N-甲基乙酰胺
  参考文献：
  名称：

  EP1970377

  摘要：

  公开号：

文献信息

• Combining Eosin Y with Selectfluor: A Regioselective Brominating System for <i>Para</i>-Bromination of Aniline Derivatives
  作者：Binbin Huang、Yating Zhao、Chao Yang、Yuan Gao、Wujiong Xia

  DOI：10.1021/acs.orglett.7b01427

  日期：2017.7.21

  A mild, metal-free, and absolutely para-selective bromination of aniline derivatives has been developed in excellent yields, wherein the organic dye Eosin Y is employed as the bromine source in company with Selectfluor. Neither air nor moisture sensitive, this facile reaction proceeds smoothly at room temperature and completes within a short time. Mechanistic studies indicate a radical pathway; therefore

  已开发出具有优异收率的温和，无金属且绝对对位选择性的苯胺衍生物溴化物，其中有机染料曙红Y与Selectfluor一起用作溴源。无论是对空气还是对湿气都不敏感，这种反应很容易在室温下进行并在短时间内完成。机理研究表明了一条根本途径。因此，的原位产生的溴化试剂的存在，“Selectbrom”，是假设，可合理解释为独特区域选择性段的-bromination Ñ -acyl-以及Ñ -sulfonylanilines。
• A <i>para</i> -C-H Functionalization of Aniline Derivatives via In situ Generated Bulky Hypervalent Iodinium Reagents
  作者：Chao Tian、Xu Yao、Weizhe Ji、Qian Wang、Guanghui An、Guangming Li

  DOI：10.1002/ejoc.201801058

  日期：2018.11.25

  A general para‐selective C‐H functionalization was achieved via a steric control strategy. Para‐iodo, bromo, chloro, nitro, and trifluormethyl aniline derivatives were prepared via in situ generated, bulky hypervalent iodinium reagents in as little as 10 min. Products can be purified without column chromatography or recrystallization, which significantly reduces the waste and simplifies the work‐up

  通过空间控制策略可实现一般的对选择性C-H功能化。对碘，溴，氯，硝基和三氟甲基苯胺衍生物可在短短10分钟内通过原位生成的大体积高价碘试剂制备。无需柱色谱或重结晶即可纯化产品，从而大大减少了浪费并简化了后处理过程。
• B(C ₆ F ₅ ) ₃ ‐Catalyzed Deoxygenative Reduction of Amides to Amines with Ammonia Borane
  作者：Yixiao Pan、Zhenli Luo、Jiahong Han、Xin Xu、Changjun Chen、Haoqiang Zhao、Lijin Xu、Qinghua Fan、Jianliang Xiao

  DOI：10.1002/adsc.201801447

  日期：2019.5.14

  The first B(C6F5)3‐catalyzed deoxygenative reduction of amides into the corresponding amines with readily accessible and stable ammonia borane (AB) as a reducing agent under mild reaction conditions is reported. This metal‐free protocol provides facile access to a wide range of structurally diverse amine products in good to excellent yields, and various functional groups including those that are reduction‐sensitive

  据报道，在温和的反应条件下，用易于获得且稳定的氨硼烷（AB）作为还原剂，将酰胺进行的首次B（C 6 F 5）3催化脱氧还原为相应的胺。该无金属方案可轻松获得各种结构多样的胺产品，且收率高至优异，并且对各种官能团（包括对还原敏感的官能团）均具有良好的耐受性。该新方法也适用于手性酰胺底物，而不会破坏对映体的纯度。BF 3  OEt 2助催化剂在该反应中的作用是通过酰胺-硼加合物的原位形成来活化酰胺羰基。
• Ru‐Catalyzed Deoxygenative Transfer Hydrogenation of Amides to Amines with Formic Acid/Triethylamine
  作者：Yixiao Pan、Zhenli Luo、Xin Xu、Haoqiang Zhao、Jiahong Han、Lijin Xu、Qinghua Fan、Jianliang Xiao

  DOI：10.1002/adsc.201900406

  日期：2019.8.21

  ruthenium(II)‐catalyzed deoxygenative transfer hydrogenation of amides to amines using HCO2H/NEt3 as the reducing agent is reported for the first time. The catalyst system consisting of [Ru(2‐methylallyl)2(COD)], 1,1,1‐tris(diphenylphosphinomethyl) ethane (triphos) and Bis(trifluoromethane sulfonimide) (HNTf2) performed well for deoxygenative reduction of various secondary and tertiary amides into the corresponding

  首次报道了使用HCO 2 H / NEt 3作为还原剂的钌（II）催化的酰胺脱氧转移胺成胺。催化剂体系由[Ru（2-甲基烯丙基）2（COD）]，1,1,1-三（二苯基膦甲基）乙烷（triphos）和双（三氟甲烷磺酰亚胺）（HNTf 2）在将各种仲酰胺和叔酰胺脱氧还原成相应的胺方面表现出色，选择性极好，并且对包括还原敏感基团在内的官能团表现出很高的耐受性。氢源和酸助催化剂的选择对于催化至关重要。机理研究表明，通过借入氢对原位生成的醇和胺进行还原胺化是主要途径。
• Aryl- and heteroaryl-substituted tetrahydroisoquinolines and use thereof to block reuptake of norepinephrine, dopamine, and serotonin
  申请人：Molino F. Bruce

  公开号：US20060052378A1

  公开（公告）日：2006-03-09

  The compounds of the present invention are represented by the chemical structure found in Formula (I): wherein: the carbon atom designated * is in the R or S configuration; and X is a fused bicyclic carbocycle or heterocycle selected from the group consisting of benzofuranyl, benzo[b]thiophenyl, benzoisothiazolyl, benzoisoxazolyl, indazolyl, indolyl, isoindolyl, indolizinyl, benzoimidazolyl, benzooxazolyl, benzothiazolyl, benzotriazolyl, imidazo[1,2-a]pyridinyl, pyrazolo[1,5-a]pyridinyl, [1,2,4]triazolo[4,3-a]pyridinyl, thieno[2,3-b]pyridinyl, thieno[3,2-b]pyridinyl, 1H-pyrrolo[2,3-b]pyridinyl, indenyl, indanyl, dihydrobenzocycloheptenyl, tetrahydrobenzocycloheptenyl, dihydrobenzothiophenyl, dihydrobenzofuranyl, indolinyl, naphthyl, tetrahydronaphthyl, quinolinyl, isoquinolinyl, 4H-quinolizinyl, 9aH-quinolizinyl, quinazolinyl, cinnolinyl, phthalazinyl, quinoxalinyl, benzo[1,2,3]triazinyl, benzo[1,2,4]triazinyl, 2H-chromenyl, 4H-chromenyl, and a fused bicyclic carbocycle or fused bicyclic heterocycle optionally substituted with substituents (1 to 4 in number) as defined in R 14 ; with R 1 , R 2 , R 3 , R 4 , R 5 , R 6 , R 7 , R 8 , and R 14 defined herein.

  本发明的化合物由以下式中的化学结构表示（I）： 其中： 指定为*的碳原子处于R或S构型；X是从苯并呋喃基、苯并噻吩基、苯并异噻唑基、苯并异噁唑基、吲哚基、吲哚基、异吲哚基、吲哚啉基、苯并咪唑基、苯并噁唑基、苯并噻唑基、苯并三唑基、咪唑并[1,2-a]吡啶基、吡唑并[1,5-a]吡啶基、[1,2,4]三唑并[4,3-a]吡啶基、噻吩并[2,3-b]吡啶基、噻吩并[3,2-b]吡啶基、1H-吡咯并[2,3-b]吡啶基、茚基、茚基、二氢苯并环庚烯基、四氢苯并环庚烯基、二氢苯并噻吩基、二氢苯并呋喃基、吲啉基、萘基、四氢萘基、喹啉基、异喹啉基、4H-喹啉基、9aH-喹啉基、喹唑啉基、喜啉基、邻苯二嗪基、喹啉基、苯并[1,2,3]三嗪基、苯并[1,2,4]三嗪基、2H-香豆素基、4H-香豆素基或者是一个可选地用取代基（1至4个）取代的螺联苯环或螺联杂环的螺联双环碳环或螺联双环杂环； 其中R1、R2、R3、R4、R5、R6、R7、R8和R14在此处定义。

表征谱图