3,5-二硝基-4-氨基吡啶 | 465514-13-0

• 物质功能分类: 医药中间体 - 杂环化合物 - 吡啶类化合物
• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 中文名称: 3,5-二硝基-4-氨基吡啶
• 中文别名: 4-(吗啉-4-磺酰基)-苯磺酰氯
• 英文名称: 4-(4-morpholinylsulfonyl)benzenesulfonyl chloride
• 英文别名: 4-(morpholinosulfonyl)benzene-1-sulfonyl chloride；4-(morpholine-4-sulfonyl)-benzenesulfonyl chloride；4-(Morpholine-4-sulfonyl)benzene-1-sulfonyl chloride；4-morpholin-4-ylsulfonylbenzenesulfonyl chloride
• CAS: 465514-13-0
• 化学式: C₁₀H₁₂ClNO₅S₂
• mdl: MFCD03659713
• 分子量: 325.794
• InChiKey: ZZSBUDUHESWZJB-UHFFFAOYSA-N

物化性质

• 熔点：
  150 °C
• 沸点：
  479.7±55.0 °C(Predicted)
• 密度：
  1.533±0.06 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  0.7
• 重原子数：
  19
• 可旋转键数：
  3
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.4
• 拓扑面积：
  97.5
• 氢给体数：
  0
• 氢受体数：
  6

安全信息

• 危险品标志：
  C
• 危险类别码：
  R34
• 海关编码：
  2935009090
• 安全说明：
  S26,S36/37/39,S45

SDS

Name:	4-(Morpholine-4-sulfonyl)-benzenesulfonyl chloride tech Material Safety Data Sheet
Synonym:
CAS:	465514-13-0

Section 1 - Chemical Product MSDS Name:4-(Morpholine-4-sulfonyl)-benzenesulfonyl chloride tech Material Safety Data Sheet
Synonym:

---

Section 2 - COMPOSITION, INFORMATION ON INGREDIENTS

CAS#	Chemical Name	content	EINECS#
465514-13-0	4-(Morpholine-4-sulfonyl)-benzenesulfo		unlisted

Hazard Symbols: C
Risk Phrases: 34

---

Section 3 - HAZARDS IDENTIFICATION
EMERGENCY OVERVIEW
Causes burns.Moisture sensitive.
Potential Health Effects
Eye:
Causes eye burns.
Skin:
Causes skin burns.
Ingestion:
Causes gastrointestinal tract burns.
Inhalation:
Causes chemical burns to the respiratory tract.
Chronic:
Not available.

---

Section 4 - FIRST AID MEASURES
Eyes: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately.
Skin:
Get medical aid immediately. Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes.
Ingestion:
Do not induce vomiting. Get medical aid immediately.
Inhalation:
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Notes to Physician:
Treat symptomatically and supportively.

---

Section 5 - FIRE FIGHTING MEASURES
General Information:
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear.
Extinguishing Media:
Use foam, dry chemical, or carbon dioxide.

---

Section 6 - ACCIDENTAL RELEASE MEASURES
General Information: Use proper personal protective equipment as indicated in Section 8.
Spills/Leaks:
Vacuum or sweep up material and place into a suitable disposal container.

---

Section 7 - HANDLING and STORAGE
Handling:
Do not breathe dust, vapor, mist, or gas. Do not get in eyes, on skin, or on clothing. Use only in a chemical fume hood.
Storage:
Store in a cool, dry place. Store in a tightly closed container.
Corrosives area. Store under an inert atmosphere.

---

Section 8 - EXPOSURE CONTROLS, PERSONAL PROTECTION
Engineering Controls:
Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.
Exposure Limits CAS# 465514-13-0: Personal Protective Equipment Eyes: Not available.
Skin:
Wear appropriate protective gloves to prevent skin exposure.
Clothing:
Wear appropriate protective clothing to prevent skin exposure.
Respirators:
Follow the OSHA respirator regulations found in 29 CFR 1910.134 or European Standard EN 149. Use a NIOSH/MSHA or European Standard EN 149 approved respirator if exposure limits are exceeded or if irritation or other symptoms are experienced.

---

Section 9 - PHYSICAL AND CHEMICAL PROPERTIES

Physical State: Solid
Color: off-white
Odor: Not available.
pH: Not available.
Vapor Pressure: Not available.
Viscosity: Not available.
Boiling Point: Not available.
Freezing/Melting Point: 145 - 151 deg C
Autoignition Temperature: Not available.
Flash Point: Not available.
Explosion Limits, lower: Not available.
Explosion Limits, upper: Not available.
Decomposition Temperature:
Solubility in water:
Specific Gravity/Density:
Molecular Formula: C10H12ClNO5S2
Molecular Weight: 325.79

---

Section 10 - STABILITY AND REACTIVITY
Chemical Stability:
Not available.
Conditions to Avoid:
Incompatible materials, exposure to moist air or water.
Incompatibilities with Other Materials:
Strong oxidizing agents.
Hazardous Decomposition Products:
Hydrogen chloride, chlorine, nitrogen oxides, carbon monoxide, oxides of sulfur, carbon dioxide.
Hazardous Polymerization: Has not been reported.

---

Section 11 - TOXICOLOGICAL INFORMATION
RTECS#:
CAS# 465514-13-0 unlisted.
LD50/LC50:
Not available.
Carcinogenicity:
4-(Morpholine-4-sulfonyl)-benzenesulfonyl chloride - Not listed by ACGIH, IARC, or NTP.

---

Section 12 - ECOLOGICAL INFORMATION

---

Section 13 - DISPOSAL CONSIDERATIONS
Dispose of in a manner consistent with federal, state, and local regulations.

---

Section 14 - TRANSPORT INFORMATION

IATA
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.*
Hazard Class: 8
UN Number: 3261
Packing Group: III
IMO
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing Group: III
RID/ADR
Shipping Name: CORROSIVE SOLID, ACIDIC, ORGANIC, N.O.S.
Hazard Class: 8
UN Number: 3261
Packing group: III

---

Section 15 - REGULATORY INFORMATION

European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: C
Risk Phrases:
R 34 Causes burns.
Safety Phrases:
S 26 In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice.
S 36/37/39 Wear suitable protective clothing, gloves
and eye/face protection.
S 45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
WGK (Water Danger/Protection)
CAS# 465514-13-0: No information available.
Canada
None of the chemicals in this product are listed on the DSL/NDSL list.
CAS# 465514-13-0 is not listed on Canada's Ingredient Disclosure List.
US FEDERAL
TSCA
CAS# 465514-13-0 is not listed on the TSCA inventory.
It is for research and development use only.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  methyl 2-(5-methyl-6H-thieno[2,3-b]pyrrol-4-yl)acetate 、 3,5-二硝基-4-氨基吡啶 在 potassium tert-butylate 作用下， 以 四氢呋喃 为溶剂， 生成
  参考文献：
  名称：

  Thienopyrrole acetic acids as antagonists of the CRTH2 receptor

  摘要：

  The bioisosteric replacement of the indole core of CRTH2 antagonists using thienopyrroles was investigated, resulting in potent antagonists with good selectivity over DP1. Early ADME/PK assessment of this chemotype demonstrated bioavailability in mice. (C) 2011 Elsevier Ltd. All rights reserved.

  DOI：

  10.1016/j.bmcl.2011.01.008

文献信息

• From Sensors to Silencers: Quinoline- and Benzimidazole-Sulfonamides as Inhibitors for Zinc Proteases
  作者：Matthieu Rouffet、César Augusto F. de Oliveira、Yael Udi、Arpita Agrawal、Irit Sagi、J. Andrew McCammon、Seth M. Cohen

  DOI：10.1021/ja101088j

  日期：2010.6.23

  sensors, chelating fragment libraries of quinoline- and benzimidazole-sulfonamides have been prepared and screened against several different zinc(II)-dependent matrix metalloproteinases (MMPs). The fragments show impressive inhibition of these metalloenzymes and preferences for different MMPs based on the nature of the chelating group. The findings show that focused chelator libraries are a powerful strategy

  源自小分子锌 (II) 离子传感器领域的广泛工作，已经制备了喹啉和苯并咪唑磺酰胺的螯合片段库，并针对几种不同的锌 (II) 依赖性基质金属蛋白酶 (MMP) 进行了筛选。基于螯合基团的性质，这些片段显示出对这些金属酶的显着抑制和对不同 MMP 的偏好。研究结果表明，聚焦螯合剂文库是发现用于金属蛋白抑制的先导片段的有力策略。
• [EN] MTH1 INHIBITORS FOR TREATMENT OF INFLAMMATORY AND AUTOIMMUNE CONDITIONS<br/>[FR] INHIBITEURS DE MTH1 DESTINÉS AU TRAITEMENT DES ÉTATS INFLAMMATOIRES ET AUTO-IMMUNS
  申请人：THOMAS HELLEDAYS STIFTELSE FÖR MEDICINSK FORSKNING

  公开号：WO2015187089A1

  公开（公告）日：2015-12-10

  A compound of formula (I), or a pharmaceutically acceptable salt thereof, for use in the treatment of autoimmune diseases and inflammatory conditions.

  化合物的化学式（I），或其药学上可接受的盐，用于治疗自身免疫性疾病和炎症性疾病。
• [EN] PYRIMIDINE-2,4-DIAMINE DERIVATIVES FOR TREATMENT OF CANCER<br/>[FR] DÉRIVÉS DE PYRIMIDINE-2,4-DIAMINE UTILISABLES EN VUE DU TRAITEMENT DU CANCER
  申请人：THOMAS HELLEDAYS STIFTELSE FÖR MEDICINSK FORSKNING

  公开号：WO2014084778A1

  公开（公告）日：2014-06-05

  A compound of formula (I), or a pharmaceutically-acceptable salt thereof. The compound is useful in the treatment of cancer or other diseases that may benefit from inhibition of MTH1.

  公式(I)的化合物，或其药用可接受的盐。该化合物可用于治疗癌症或其他可能从抑制MTH1中受益的疾病。
• HIV Integrase Inhibitors
  申请人：Beaulieu Francis

  公开号：US20090253677A1

  公开（公告）日：2009-10-08

  The disclosure generally relates to the novel compounds of formula I, including their salts, which inhibit HIV integrase and prevent viral integration into human DNA. This action makes the compounds useful for treating HIV infection and AIDS. The invention also encompasses pharmaceutical compositions and methods for treating those infected with HIV.

  该披露通常涉及到公式I的新化合物，包括它们的盐，这些化合物抑制HIV整合酶并防止病毒整合到人类DNA中。这种作用使得这些化合物对治疗HIV感染和艾滋病有用。该发明还涵盖了用于治疗HIV感染者的药物组合物和方法。
• Structure–activity relationship studies of a novel series of anthrax lethal factor inhibitors
  作者：Sherida L. Johnson、Li-Hsing Chen、Elisa Barile、Aras Emdadi、Mojgan Sabet、Hongbin Yuan、Jun Wei、Donald Guiney、Maurizio Pellecchia

  DOI：10.1016/j.bmc.2009.03.040

  日期：2009.5

  We report on the identification of a novel small molecule inhibitor of anthrax lethal factor using a high-throughput screening approach. Guided by molecular docking studies, we carried out structure–activity relationship (SAR) studies and evaluated activity and selectivity of most promising compounds in in vitro enzyme inhibition assays and cellular assays. Selected compounds were further analyzed

  我们报告了使用高通量筛选方法鉴定炭疽致死因子的新型小分子抑制剂。在分子对接研究的指导下，我们进行了构效关系 (SAR) 研究，并在体外酶抑制试验和细胞试验中评估了最有希望的化合物的活性和选择性。对所选化合物的体外 ADME 特性进行了进一步分析，这使我们能够选择两种化合物进行进一步的初步体内功效研究。所提供的数据代表了进一步药理学和药物化学优化的基础，这些优化可能会产生新的抗炭疽疗法。