2,3-二氨基吡啶-5-硼酸频那醇酯 | 1204334-21-3

• 分子结构分类: 有机化合物 - 有机杂环化合物 - 吡啶及其衍生物
• 中文名称: 2,3-二氨基吡啶-5-硼酸频那醇酯
• 英文名称: 5-(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)pyridine-2,3-diamine
• CAS: 1204334-21-3
• 化学式: C₁₁H₁₈BN₃O₂
• 分子量: 235.094
• InChiKey: XYAJKHYERTYNDS-UHFFFAOYSA-N

物化性质

• 沸点：
  423.7±45.0 °C(Predicted)
• 密度：
  1.14±0.1 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  0.55
• 重原子数：
  17
• 可旋转键数：
  1
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.55
• 拓扑面积：
  83.4
• 氢给体数：
  2
• 氢受体数：
  5

安全信息

• 危险类别码：
  R25
• 海关编码：
  2934999090

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : 2,3-Diaminopyridine-5-Boronic Acid Pinacol Ester
: BML00223
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral (Category 3), H301
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
T Toxic R25
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal word Danger
Hazard statement(s)
Toxic if swallowed.
Precautionary statement(s)
P301 + P310 IF SWALLOWED: Immediately call a POISON CENTER or doctor/
physician.
Supplemental Hazard none
Statements
Other hazards
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

---

SECTION 3: Composition/information on ingredients
Substances
Molecular weight : 235,1 g/mol
Hazardous ingredients according to Regulation (EC) No 1272/2008
Component Classification Concentration
2,3-Diaminopyridine-5-Boronic Acid Pinacol Ester
Acute Tox. 3; H301 <= 100 %
Hazardous ingredients according to Directive 1999/45/EC
Component Classification Concentration
2,3-Diaminopyridine-5-Boronic Acid Pinacol Ester
T, R25 <= 100 %
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Take victim immediately to hospital. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
No data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Nature of decomposition products not known.
Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
No data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Wear respiratory protection. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Storage class (TRGS 510): Non-combustible, acute toxic Cat.3 / toxic hazardous materials or hazardous
materials causing chronic effects
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Avoid contact with skin, eyes and clothing. Wash hands before breaks and immediately after handling
the product.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face particle
respirator type N99 (US) or type P2 (EN 143) respirator cartridges as a backup to engineering
controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use
respirators and components tested and approved under appropriate government standards such
as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour No data available
c) Odour Threshold No data available
d) pH No data available
e) Melting point/freezing No data available
point
f) Initial boiling point and No data available
boiling range
g) Flash point No data available
h) Evaporation rate No data available
i) Flammability (solid, gas) No data available
j) Upper/lower No data available
flammability or
explosive limits
k) Vapour pressure No data available
l) Vapour density No data available
m) Relative density No data available
n) Water solubility No data available
o) Partition coefficient: n- No data available
octanol/water
p) Auto-ignition No data available
temperature
q) Decomposition No data available
temperature
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
Other safety information
No data available

---

SECTION 10: Stability and reactivity
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
No data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
No data available
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

---

SECTION 12: Ecological information
Toxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Results of PBT and vPvB assessment
This substance/mixture contains no components considered to be either persistent, bioaccumulative and
toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other adverse effects
No data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: 2811 IMDG: 2811 IATA: 2811
UN proper shipping name
ADR/RID: TOXIC SOLID, ORGANIC, N.O.S. (2,3-Diaminopyridine-5-Boronic Acid Pinacol Ester)
IMDG: TOXIC SOLID, ORGANIC, N.O.S. (2,3-Diaminopyridine-5-Boronic Acid Pinacol Ester)
IATA: Toxic solid, organic, n.o.s. (2,3-Diaminopyridine-5-Boronic Acid Pinacol Ester)
Transport hazard class(es)
ADR/RID: 6.1 IMDG: 6.1 IATA: 6.1
Packaging group
ADR/RID: III IMDG: III IATA: III
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
No data available

---

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
No data available
Chemical Safety Assessment

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  6-fluoro-3-iodo-1-(phenylsulfonyl)-1H-indole 、 2,3-二氨基吡啶-5-硼酸频那醇酯 以650 mg (48%) of the title compound was obtained as a brown solid的产率得到5-(6-fluoro-1-(phenylsulfonyl)-1H-indol-3-yl)pyridine-2,3-diamine
  参考文献：
  名称：

  NOVEL 3-(INDOL-3-YL)-PYRIDINE DERIVATIVES, PHARMACEUTICAL COMPOSITIONS AND METHODS FOR USE

  摘要：

  本发明涉及公式I的化合物或其药学上可接受的对映体、盐或溶剂。本发明还涉及将公式I的化合物用作TDO2抑制剂的用途。本发明还涉及将公式I的化合物用于治疗和/或预防癌症、神经退行性疾病，如帕金森病、阿尔茨海默病和亨廷顿病、慢性病毒感染，如丙型肝炎病毒和人类免疫缺陷病毒、抑郁症和肥胖症。本发明还涉及一种制造公式I的化合物的方法。

  公开号：

  US20150225367A1
• 作为产物：
  描述：

  2,3-二氨基-5-溴吡啶 、 联硼酸频那醇酯 在 1,1'-双(二苯膦基)二茂铁二氯化钯(II)二氯甲烷复合物 、 potassium acetate 作用下， 以 1,4-二氧六环 为溶剂， 生成 2,3-二氨基吡啶-5-硼酸频那醇酯
  参考文献：
  名称：

  NOVEL 3-(INDOL-3-YL)-PYRIDINE DERIVATIVES, PHARMACEUTICAL COMPOSITIONS AND METHODS FOR USE

  摘要：

  本发明涉及公式I的化合物或其药用可接受的对映体、盐或溶剂化物。该发明进一步涉及将公式I的化合物用作TDO2抑制剂。该发明还涉及将公式I的化合物用于治疗和/或预防癌症、帕金森病、阿尔茨海默病和亨廷顿病等神经退行性疾病、慢性病毒感染如HCV和HIV、抑郁症以及肥胖症。该发明还涉及一种制造公式I化合物的方法。

  公开号：

  US20150225367A1

文献信息

• PDE 10a Inhibitors for the Treatment of Type II Diabetes
  申请人：Janssen Pharmaceutica, NV

  公开号：US20140364414A1

  公开（公告）日：2014-12-11

  Disclosed are compounds, compositions and methods for treating Type II diabetes. Such compounds are represented by Formula (I) as follows: wherein R 1 , R 2 , L, and Q are defined herein.

  本发明涉及用于治疗2型糖尿病的化合物、组合物和方法。此类化合物由下式（I）所表示：其中，R1、R2、L和Q在此定义。
• PDE10a inhibitors for the treatment of type II diabetes
  申请人：Janssen Pharmaceutica, NV

  公开号：US09249163B2

  公开（公告）日：2016-02-02

  Disclosed are compounds, compositions and methods for treating Type II diabetes and other disorders affected by activity of the enzyme PDE10a. Such compounds are represented by Formula (I) below, wherein R1, R2, L and Q are defined herein.

  本发明涉及用于治疗II型糖尿病和其他受PDE10a酶活性影响的疾病的化合物、组合物和方法。这些化合物由下式（I）表示，其中R1、R2、L和Q如下所定义。