2-异丙基丁醛 | 26254-92-2

• 分子结构分类: 有机化合物 - 有机氧化合物 - 有机氧化物
• 中文名称: 2-异丙基丁醛
• 英文名称: α-ethylisovaleraldehyde
• 英文别名: 2-Ethyl-3-methylbutanal；2-ethylisovaleraldehyde；2-ethyl-3methylbutanal；2-isopropylbutanal；2-ethyl-3-methyl-butyraldehyde；(+/-)-2-ethyl-3-methyl-butyraldehyde
• CAS: 26254-92-2
• 化学式: C₇H₁₄O
• 分子量: 114.188
• InChiKey: SHGPBDQRELYPLO-UHFFFAOYSA-N

物化性质

• 熔点：
  128-132 °C
• 沸点：
  134 ºC
• 密度：
  0.803
• 闪点：
  33 ºC
• LogP：
  2.130 (est)

计算性质

• 辛醇/水分配系数(LogP)：
  1.9
• 重原子数：
  8
• 可旋转键数：
  3
• 环数：
  0.0
• sp3杂化的碳原子比例：
  0.86
• 拓扑面积：
  17.1
• 氢给体数：
  0
• 氢受体数：
  1

安全信息

• 海关编码：
  2912190090
• 储存条件：
  2-8°C，干燥且密封保存。

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : 2-ETHYLISOVALERALDEHYDE
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No. : 26254-92-2
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Skin sensitisation (Category 1), H317
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Xi Irritant R43
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal word Warning
Hazard statement(s)
H317 May cause an allergic skin reaction.
Precautionary statement(s)
P280 Wear protective gloves.
Supplemental Hazard none
Statements
Other hazards - none

---

SECTION 3: Composition/information on ingredients
Substances
Formula : C7H14O
Molecular weight : 114,19 g/mol
CAS-No. : 26254-92-2
Hazardous ingredients according to Regulation (EC) No 1272/2008
Component Classification Concentration
2-ETHYLISOVALERALDEHYDE
CAS-No. 26254-92-2 Skin Sens. 1; H317 <= 100 %
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
No data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides
Advice for firefighters
Wear self-contained breathing apparatus for firefighting if necessary.
Further information
No data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation.
For personal protection see section 8.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the
environment must be avoided.
Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Normal measures for preventive fire protection.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Face shield and safety glasses Use equipment for eye protection tested and approved under
appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup
to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into
the environment must be avoided.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: liquid
b) Odour No data available
c) Odour Threshold No data available
d) pH No data available
e) Melting point/freezing No data available
point
f) Initial boiling point and No data available
boiling range
g) Flash point No data available
h) Evaporation rate No data available
i) Flammability (solid, gas) No data available
j) Upper/lower No data available
flammability or
explosive limits
k) Vapour pressure No data available
l) Vapour density No data available
m) Relative density No data available
n) Water solubility No data available
o) Partition coefficient: n- log Pow: 2,12
octanol/water
p) Auto-ignition No data available
temperature
q) Decomposition No data available
temperature
r) Viscosity No data available
s) Explosive properties No data available
t) Oxidizing properties No data available
Other safety information
No data available

---

SECTION 10: Stability and reactivity
Reactivity
No data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
No data available
Conditions to avoid
No data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - No data available
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
No data available
Skin corrosion/irritation
No data available
Serious eye damage/eye irritation
No data available
Respiratory or skin sensitisation
The preceding data, or interpretation of data, was determined using Quantitative Structure Activity
Relationship (QSAR) modeling.
Germ cell mutagenicity
No data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
No data available
Specific target organ toxicity - single exposure
No data available
Specific target organ toxicity - repeated exposure
No data available
Aspiration hazard
No data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

---

SECTION 12: Ecological information
Toxicity
No data available
Persistence and degradability
No data available
Bioaccumulative potential
No data available
Mobility in soil
No data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
Toxic to aquatic life.
No data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Contact a licensed
professional waste disposal service to dispose of this material.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
No data available

---

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
No data available
Chemical Safety Assessment
For this product a chemical safety assessment was not carried out

---

SECTION 16: Other information
Full text of H-Statements referred to under sections 2 and 3.
H317 May cause an allergic skin reaction.
Skin Sens. Skin sensitisation
Full text of R-phrases referred to under sections 2 and 3
R43 May cause sensitisation by skin contact.
Further information
Copyright 2014 Co. LLC. License granted to make unlimited paper copies for internal use
only.
The above information is believed to be correct but does not purport to be all inclusive and shall be
used only as a guide. The information in this document is based on the present state of our knowledge
and is applicable to the product with regard to appropriate safety precautions. It does not represent any
guarantee of the properties of the product. Corporation and its Affiliates shall not be held
liable for any damage resulting from handling or from contact with the above product. See
and/or the reverse side of invoice or packing slip for additional terms and conditions of sale.

反应信息

• 作为反应物：
  描述：

  2-异丙基丁醛 在 potassium permanganate 、 硫酸 作用下， 生成 2-乙基-3-甲基丁酸
  参考文献：
  名称：

  酰氯与氯三（三苯基膦）铑（I）脱羰的机理。立体化学和消除方向

  摘要：

  赤-和苏-2,3-二苯基丁酰氯与氯三（三苯基膦）铑（I）脱羰分别得到反式和顺式甲基芪。这些结果最好通过带有保留的酰基- - 烷基重排和顺式 BETA - 氢化物消除或集中的顺式消除来解释。dichioro(3-perdeuteriophenyl-3,3-dideuteriopropionyl)bis(triphenylphosphine) 铑 (III) 与未氘化配合物 k/sub H/ = 3.34 x 10/sup -5/ sec/sup -1 的脱羰速率/, k/ sub D/ - 4.75 x 10/sup -6/ sec/sup -1/) 显示 7.04 的初级氘 m 同位素效应。2-甲基戊酰氯、2,2-二甲基戊酰氯、2-乙基-;3-甲基丁酰氯和2，3-二甲基丁酰氯与反式-氯羰基双（三苯膦）铑（I）表明该烯烃形成反应优先于Saytzeff消除。(auth) (VIII)、双对硝基苯亚硫酸盐

  DOI：

  10.1021/ja00812a040
• 作为产物：
  描述：

  1-methoxy-3-methyl-butan-2-one 在 乙醚 、 草酸 作用下， 生成 2-异丙基丁醛
  参考文献：
  名称：

  2,3-Dimethylbutanal and 2-Ethyl-3-methylbutanal

  摘要：

  DOI：

  10.1021/ja01215a059

文献信息

• [EN] INSECTICIDAL METHODS USING NITROGEN-CONTAINING HETEROAROMATIC COMPOUNDS<br/>[FR] PROCÉDÉS INSECTICIDES UTILISANT DES COMPOSÉS HÉTÉROAROMATIQUES CONTENANT DE L'AZOTE
  申请人：BASF SE

  公开号：WO2011064188A1

  公开（公告）日：2011-06-03

  Insectical methods using nitrogen containing heteroaromatic compounds The present invention relates to new insecticidal methods of using nitrogen-containing heteroaromatic compounds of the formula (I), wherein A, E, G, M, W, Y, X, R1 and R2 are defined as in the description, and to their enantiomers, diastereomers and agriculturally and veterinary acceptable salts. The present invention relates to methods of administering and applying such Pyridine compounds of formula I for insecticidal use and purposes in agriculture and in the veterinary field. The invention relates also to new derivatives of Pyridine compounds of formula I.

  使用含氮杂芳化合物的杀虫方法。本发明涉及使用式(I)的含氮杂芳化合物的新杀虫方法，其中A、E、G、M、W、Y、X、R1和R2如描述中所定义，并且其对映异构体、顺反异构体和农业和兽医可接受的盐。本发明涉及用于农业和兽医领域的杀虫用途和目的的给药和应用式I的吡啶化合物的方法。该发明还涉及式I的吡啶化合物的新衍生物。
• [EN] INSECTICIDAL METHODS USING PYRIDINE COMPOUNDS<br/>[FR] PROCÉDÉS INSECTICIDES UTILISANT DES COMPOSÉS À BASE DE PYRIDINE
  申请人：BASF SE

  公开号：WO2011057942A1

  公开（公告）日：2011-05-19

  The present invention relates to new insecticidal methods of using compounds of formula (I) wherein A, E, G, M, Y, X, R1 and R2 are defined as in the description, and to their enantiomers, diastereomers and agriculturally and veterinary acceptable salts. The present invention relates to methods of administering and applying such Pyridine compounds of formula I for insecticidal use and purposes in agriculture and in the veterinary field. The invention relates also to new derivatives of Pyridine compounds of formula (I).

  本发明涉及使用式(I)化合物的新杀虫方法，其中A、E、G、M、Y、X、R1和R2的定义如描述中所述，以及它们的对映体、二对映体和农业和兽医可接受的盐。本发明涉及用于杀虫用途和农业以及兽医领域的目的的给药和应用此类吡啶化合物的方法。该发明还涉及式(I)吡啶化合物的新衍生物。
• Anti-infective agents
  申请人：——

  公开号：US20040087577A1

  公开（公告）日：2004-05-06

  Compounds having the formula 1 are hepatitis C (HCV) polymerase inhibitors. Also disclosed are a composition and method for inhibiting hepatitis C (HCV) polymerase, processes for making the compounds, and synthetic intermediates employed in the processes.

  具有公式1的化合物是丙型肝炎（HCV）聚合酶抑制剂。还公开了一种用于抑制丙型肝炎（HCV）聚合酶的组成和方法，用于制造这些化合物的过程，以及在这些过程中使用的合成中间体。
• Processes for preparing beta-hydroxy-ketones and alpha,beta-unsaturated ketones
  申请人：Barnicki Donald Scott

  公开号：US20050004401A1

  公开（公告）日：2005-01-06

  Processes for producing β-hydroxy-ketones and α,β-unsaturated ketones are disclosed which comprise the crossed condensation of an aldehyde with a ketone in the presence of a hydroxide or alkoxide of alkali metal or an alkaline earth metal as catalyst. The products of the process, β-hydroxy-ketones and α,β-unsaturated ketones, are useful for the preparation of many commercially important products in the chemical process industries including solvents, drug intermediates, flavors and fragrances, other specialty chemical intermediates.

  披露了生产β-羟基酮和α,β-不饱和酮的过程，这些过程包括在碱金属或碱土金属的氢氧化物或醇盐的催化下，醛与酮的交叉缩合。该过程的产品，即β-羟基酮和α,β-不饱和酮，对于化学工艺工业中许多商业上重要产品的制备非常有用，包括溶剂、药物中间体、香精和香料、以及其他专用化学品中间体。
• [EN] 3-ALKYLIDENEHYDRAZINO SUBSTITUTED HETEROARYL COMPOUNDS AS THROMBOPOIETIN RECEPTOR ACTIVATORS<br/>[FR] UTILISATION DE COMPOSES HETEROARYLES A SUBSTITUTION 3-ALKYLIDENEHYDRAZINO EN TANT QU'ACTIVATEURS DU RECEPTEUR DE LA THROMBOPOIETINE
  申请人：NISSAN CHEMICAL IND LTD

  公开号：WO2004108683A1

  公开（公告）日：2004-12-16

  A compound represented by the formula (1): wherein A is a nitrogen atom or CR4, B is an oxygen atom, a sulfur atom or NR9 (provided that when A is a nitrogen atom, B is not NH), R1 is a C2-14; aryl group, L1 is a bond, CR10R11, an oxygen atom, a sulfur atom or NR12, X is OR13, SR13 or NR14NR15, R2 is a hydrogen atom, a formyl group, a C1-10; alkyl group or the like, L2 is a bond or the like, L3 is a bond, CR17R18, an oxygen atom, a sulfur atom or NR19, L4 is a bond, CR20R21, an oxygen atom, a sulfur atom or NR22, Y is an oxygen atom, a sulfur atom or NR23, and R3 is a C2-14; aryl group, a tautomer, prodrug or pharmaceutically acceptable salt of the compound or a solvate thereof.

  化合物的结构式（1）如下：其中A是氮原子或CR4，B是氧原子、硫原子或NR9（但当A是氮原子时，B不是NH），R1是C2-14芳基，L1是键，CR10R11、氧原子、硫原子或NR12，X是OR13、SR13或NR14NR15，R2是氢原子、甲酰基、C1-10烷基或类似物，L2是键或类似物，L3是键，CR17R18、氧原子、硫原子或NR19，L4是键，CR20R21、氧原子、硫原子或NR22，Y是氧原子、硫原子或NR23，R3是C2-14芳基、化合物的互变异构体、前药或药学上可接受的盐或其溶剂化合物。

表征谱图