摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

十八烯酸甲氧基乙酯 | 111-10-4

中文名称
十八烯酸甲氧基乙酯
中文别名
油酸甲氧基乙酯
英文名称
2-methoxyethyl oleate
英文别名
ethylene glycol methyl ether oleate;oleic acid-(2-methoxy-ethyl ester);Oelsaeure-(2-methoxy-aethylester);1-Methoxy-2-oleoyloxy-aethan;2-methoxyethyl (Z)-octadec-9-enoate
十八烯酸甲氧基乙酯化学式
CAS
111-10-4
化学式
C21H40O3
mdl
——
分子量
340.547
InChiKey
UFARNTYYPHYLGN-KHPPLWFESA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

物化性质

  • 熔点:
    -19.9°C
  • 沸点:
    416.32°C (rough estimate)
  • 密度:
    0.9020
  • LogP:
    7.900 (est)

计算性质

  • 辛醇/水分配系数(LogP):
    7.4
  • 重原子数:
    24
  • 可旋转键数:
    19
  • 环数:
    0.0
  • sp3杂化的碳原子比例:
    0.86
  • 拓扑面积:
    35.5
  • 氢给体数:
    0
  • 氢受体数:
    3

安全信息

  • 海关编码:
    2916150000

SDS

SDS:c9e49dd4d0eec3f45bf0937c0867e95c
查看

上下游信息

  • 上游原料
    中文名称 英文名称 CAS号 化学式 分子量

反应信息

  • 作为反应物:
    描述:
    十八烯酸甲氧基乙酯 在 iron(III) chloride 、 过氧化苯甲酸叔丁酯sodium hydrogensulfite 作用下, 以 异丙醇 为溶剂, 反应 72.0h, 生成
    参考文献:
    名称:
    油酸二钠盐的合成方法
    摘要:
    一种油酸二钠盐的合成方法是将油酸、甲醇与对甲苯磺酸反应得到油酸甲酯;然后油酸甲酯与环氧乙烷加成得到油酸甲酯乙氧基化物;此中间产物再与亚硫酸氢钠发生磺化加成反应,得到的油酸甲酯乙氧基化物磺酸盐经皂化反应后,再经乙酸乙酯与30wt%的饱和氯化钠水溶液多次萃取分离即得油酸二钠盐。本发明优点在于原料丰富可再生,且磺化率较高;制备过程中所用溶剂廉价易得且可回收利用;反应温和,耗能小,磺化率高和产率高。
    公开号:
    CN108484450B
  • 作为产物:
    描述:
    油酸对甲苯磺酸 作用下, 以 甲醇 为溶剂, 60.0~150.0 ℃ 、400.01 kPa 条件下, 反应 2.0h, 生成 十八烯酸甲氧基乙酯
    参考文献:
    名称:
    油酸二钠盐的合成方法
    摘要:
    一种油酸二钠盐的合成方法是将油酸、甲醇与对甲苯磺酸反应得到油酸甲酯;然后油酸甲酯与环氧乙烷加成得到油酸甲酯乙氧基化物;此中间产物再与亚硫酸氢钠发生磺化加成反应,得到的油酸甲酯乙氧基化物磺酸盐经皂化反应后,再经乙酸乙酯与30wt%的饱和氯化钠水溶液多次萃取分离即得油酸二钠盐。本发明优点在于原料丰富可再生,且磺化率较高;制备过程中所用溶剂廉价易得且可回收利用;反应温和,耗能小,磺化率高和产率高。
    公开号:
    CN108484450B
点击查看最新优质反应信息

文献信息

  • Synthesis of ethylene glycol monomethyl ether monolaurate catalysed by KF/NaAlO<sub>2</sub>as a novel and efficient solid base
    作者:Shengfeng Lou、Lihua Jia、Xiangfeng Guo、Wenwang Wu、Lianbing Gao、Hongyuan Wu、Jianjun Wang
    DOI:10.1039/c5ra20539e
    日期:——
    (Ea) of the reaction of EGME with ML equals 56.54 kJ mol−1, and the thermodynamic parameters of activation were evaluated based on an activation complex theory of the reaction, and the following data were obtained: ΔG‡ > 0, ΔH‡ > 0 and ΔS‡ < 0, indicating the unspontaneous and endergonic nature of the reaction of EGME with ML. A Koros–Nowak test was conducted and the results confirmed that the diffusion
    采用湿法浸渍法制备了一种新型的KF改性的NaAlO 2固体碱催化剂(x -KF / NaAlO 2),并用于合成乙二醇单甲基醚单月桂酸酯(EGMEML)。乙二醇甲醚EGME)和月桂酸甲酯(ML)的酯交换反应。使用哈米特指示剂法,X射线衍射,热重分析,傅里叶变换红外光谱和带有能量色散光谱仪的扫描电子显微镜对催化剂进行表征。研究了反应参数如KF负载量,EGME与ML的摩尔比,催化剂用量,反应时间和温度对EGMEML收率的影响。这些特征得出结论,NaAlO 2和KF之间的反应主要产生氟铝酸盐,其作为酯交换作用的主要活性部位。该催化剂显示出优异的催化活性和良好的稳定性。超过30%-KF / NaAlO可获得91%的最高产率2以3.0的EGME / ML摩尔比,为5重量%的催化剂量,并且在120℃下4小时的反应时间。使用三个连续回合后无需重新激活,即可获得80%的产率。此外,使用30%-KF /
  • Transparent resin composition
    申请人:Higuchi Shoichi
    公开号:US20060281860A1
    公开(公告)日:2006-12-14
    The present invention has its object to provide a thermoplastic resin for producing moldings having enough transparency and excellent in permanent antistatic properties and mechanical properties. The present invention provides a transparent resin composition which comprises at least one block polymer (A) selected from the group consisting of specific block polymers (A1) and (A2) and a transparent resin (B), with the difference in refractive index between (A) and (B) being not more than 0.01.
    本发明的目的是提供一种热塑性树脂,用于生产具有足够透明度和优异永久抗静电性和机械性能的成型品。本发明提供了一种透明树脂组合物,其包括至少一种从特定块聚合物(A1)和(A2)组成的群体中选择的块聚合物(A)和透明树脂(B),其中(A)和(B)之间的折射率差不超过0.01。
  • CONTROLLED RELEASE PHARMACEUTICAL COMPOSITIONS FOR PROLONGED EFFECT
    申请人:Hemmingsen Pernille Hoyrup
    公开号:US20100239667A1
    公开(公告)日:2010-09-23
    Layered pharmaceutical composition suitable for oral use in the treatment of diseases where absorption takes place over a large part of the gastrointestinal tract. The composition comprising A) a solid inner layer comprising i) an active substance, and ii) one or more disintegrants/exploding agents, one of more effervescent agents or a mixture thereof. the solid inner layer being sandwiched between two outer layers B1) and B2), each outer layer comprising iii) a substantially water soluble and/or crystalline polymer or a mixture of substantially water soluble and/or crystalline polymers, the polymer being a polyglycol in the form of one of a) a homopolymer having a MW of at least about 100,000 daltons, and b) a copolymer having a MW of at least about 2,000 daltons, or a mixture thereof, and iv) an active substance, which is the same as in said solid inner layer A), and layer A being different from layer B, the layered composition being coated with a coating C) that has at least one opening exposing at least one surface of said outer layer, the coating being substantially insoluble in and impermeable to fluids and comprising a polymer, and the composition having a cylindrical form optionally with one or more tapered ends, wherein the ratio between the surface area of one end surface of the cylinder and the length of the cylinder is in a range of from 0.02 to 45 mm.
    分层制药组合物,适用于口服治疗吸收发生在胃肠道大部分的疾病。该组合物包括A) 一个固体内层,其中包括i) 一种活性物质,和ii) 一种或多种分散剂/爆炸剂,一种或多种泡腾剂或其混合物。该固体内层被夹在两个外层B1)和B2)之间,每个外层包括iii) 一种或多种溶性和/或结晶聚合物,或者溶性和/或结晶聚合物的混合物,聚合物为聚乙二醇,形式为a) 分子量至少为约100,000道尔顿的同聚物,和b) 分子量至少为约2,000道尔顿的共聚物,或其混合物,和iv) 一种活性物质,其与所述固体内层A)中的活性物质相同,且层A与层B不同,该分层组合物被涂覆有一种涂层C),该涂层具有至少一个开口,暴露出至少一个外层的表面,该涂层在液体中具有相当的不溶性和不透性,包括一种聚合物,该组合物具有圆柱形状,可选地具有一个或多个锥形端部,其中圆柱体的一个端面的表面积与圆柱体的长度之比在0.02至45毫米的范围内。
  • TIRE TREAD RUBBER COMPOSITION
    申请人:SUMITOMO RUBBER INDUSTRIES, LTD.
    公开号:EP0182912A1
    公开(公告)日:1986-06-04
    A tire tread rubber composition having improved gripping, steering and low-temperature characteristics, containing 15 to 50 parts by weight of a specific styrene-butadiene rubber obtained by solution polymeration and having a macromolecular chain modified with a tri- and/or tetrafunctional binder, 50 to 85 parts by weight of at least one rubber selected from the group consisting of emulsion-polymerized styrene-butadiene rubber, natural rubber, synthetic polysoprene rubber, and butadiene rubber, at least one compound selected from the group consisting of sebacic esters, adipic esters, and fatty acid esters as plasticizer, and carbon black of 30 mµ or less in mean particle size.
    一种轮胎胎面橡胶组合物,具有更好的抓地力、转向性和低温特性,按重量计,含有 15 至 50 份通过溶液聚合获得的特定丁苯橡胶,其大分子链用三官能团和/或四官能团粘合剂改性、50 至 85 重量份的至少一种橡胶,选自乳液聚合丁苯橡胶、天然橡胶、合成聚异戊二烯橡胶和丁二烯橡胶组成的组,至少一种化合物,选自癸二酸酯、己二酸酯和脂肪酸酯组成的组作为增塑剂,以及平均粒径为 30 微米或更小的黑。
  • SAFETY-GLASS INTERLAYER
    申请人:SHOWA DENKO KABUSHIKI KAISHA
    公开号:EP0246329A1
    公开(公告)日:1987-11-25
    A safety-glass interlayer which comprises a mixture of at least two crosslinked or uncrosslinked ethylenic copolymers. This interlayer has excellent water resistance, penetration resistance, adhesion workability, and good transparency.
    一种安全玻璃中间膜,由至少两种交联或未交联乙烯共聚物的混合物组成。 这种中间膜具有优异的耐性、抗渗透性、粘合加工性和良好的透明度。
查看更多