二(吡啶-3-基)甲酮 | 35779-35-2

• 物质功能分类: 医药中间体 - 杂环化合物 - 吡啶类化合物
• 分子结构分类: 有机化合物 - 有机杂环化合物 - 吡啶及其衍生物
• 中文名称: 二(吡啶-3-基)甲酮
• 中文别名: 二-吡啶-3-基-甲酮
• 英文名称: di-3-pyridylmethanone
• 英文别名: di(pyridin-3-yl)methanone；di(3-pyridyl) ketone；3-Nicotinoylpyridin；di-(pyridin-3-yl)ketone；dipyridin-3-ylmethanone
• CAS: 35779-35-2
• 化学式: C₁₁H₈N₂O
• 分子量: 184.197
• InChiKey: AQLPDLOXKZRZEV-UHFFFAOYSA-N

物化性质

• 熔点：
  115.5-117.0 °C
• 沸点：
  346.8±17.0 °C(Predicted)
• 密度：
  1.196±0.06 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  0.8
• 重原子数：
  14
• 可旋转键数：
  2
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.0
• 拓扑面积：
  42.8
• 氢给体数：
  0
• 氢受体数：
  3

安全信息

• WGK Germany：
  3
• 危险性防范说明：
  P261,P305+P351+P338
• 危险性描述：
  H302,H315,H319,H335
• 储存条件：
  室温下，应保存在惰性气体中。

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : Dipyridin-3-ylmethanone
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No. : 35779-35-2
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Acute toxicity, Oral (Category 4), H302
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Xn Harmful R22
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal word Warning
Hazard statement(s)
H302 Harmful if swallowed.
Precautionary statement(s) none
Supplemental Hazard none
Statements
Other hazards - none

---

SECTION 3: Composition/information on ingredients
Substances
Formula : C11H8N2O
Molecular Weight : 184,19 g/mol
CAS-No. : 35779-35-2
Hazardous ingredients according to Regulation (EC) No 1272/2008
Component Classification Concentration
Dipyridin-3-ylmethanone
CAS-No. 35779-35-2 Acute Tox. 4; H302 <= 100 %
Hazardous ingredients according to Directive 1999/45/EC
Component Classification Concentration
Dipyridin-3-ylmethanone
CAS-No. 35779-35-2 Xn, R22 <= 100 %
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides, nitrogen oxides (NOx)
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensure
adequate ventilation. Avoid breathing dust.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
Complete suit protecting against chemicals, The type of protective equipment must be selected
according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher
level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges.
Use respirators and components tested and approved under appropriate government standards
such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: solid
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing no data available
point
f) Initial boiling point and no data available
boiling range
g) Flash point no data available
h) Evapouration rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density no data available
n) Water solubility no data available
o) Partition coefficient: n- log Pow: 1,166
octanol/water
p) Auto-ignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
Prolonged or repeated exposure may cause allergic reactions in certain sensitive individuals.
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

---

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material
with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
no data available

---

---

SECTION 15 - REGULATORY INFORMATION
N/A

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  二(吡啶-3-基)甲酮 在 potassium hydroxide 、 一水合肼 作用下， 以 乙二醇 为溶剂， 反应 2.75h， 以96%的产率得到二吡啶-3-甲烷
  参考文献：
  名称：

  新型神经酰胺衍生物的合成及光致发光性能

  摘要：

  一系列新的神经酰胺衍生物 8a-f 已通过 4-5 步合成，涉及神经酰胺与各种三苯基溴化鏻的 Wittig 反应。报告了它们的紫外线和光致发光 (PL) 特性。在 1 × 10-5 M CH2Cl2 的浓度下，这些化合物在 502 和 522 nm 之间显示出中等至强的 PL。© 2011 Wiley Periodicals, Inc. 杂原子化学 23:66–73, 2012; 在 wileyonlinelibrary.com 上在线查看这篇文章。DOI 10.1002/hc.20753

  DOI：

  10.1002/hc.20753
• 作为产物：
  描述：

  烟酸乙酯 在 正丁基锂 作用下， 以 乙醚 为溶剂， 反应 2.25h， 以49%的产率得到二(吡啶-3-基)甲酮
  参考文献：
  名称：

  NEW COMPOUNDS I/418

  摘要：

  提供了式I的化合物， 其中R1至R7在描述中给出了它们的含义，这些化合物在预防和治疗心律失常方面非常有用，特别是房性和室性心律失常。

  公开号：

  US20080015237A1

文献信息

• [EN] CARBAMATE COMPOUNDS AND OF MAKING AND USING SAME<br/>[FR] COMPOSÉS CARBAMATES ET LEUR PROCÉDÉ DE FABRICATION ET D'UTILISATION
  申请人：ABIDE THERAPEUTICS

  公开号：WO2013142307A1

  公开（公告）日：2013-09-26

  Provided herein are carbamate compounds which may be useful in the treatment of, for example, pain, solid tumors and/or obesity.

  本文提供的是可能在治疗疼痛、实体肿瘤和/或肥胖等方面有用的氨基甲酸酯化合物。
• Palladium-Catalyzed Synthesis of Diaryl Ketones from Aldehydes and (Hetero)Aryl Halides via C–H Bond Activation
  作者：Takayuki Wakaki、Takaya Togo、Daisuke Yoshidome、Yoichiro Kuninobu、Motomu Kanai

  DOI：10.1021/acscatal.8b00440

  日期：2018.4.6

  We developed a palladium-catalyzed C–H transformation that enabled the synthesis of ketones from aldehydes and (hetero)aryl halides. The use of picolinamide ligands was key to achieving the transformation. Heteroaryl ketones, as well as diaryl ketones, were synthesized in good to excellent yields, even in gram-scale, using this reaction. Results of density functional theory (DFT) calculations support

  我们开发了钯催化的CH转化，可从醛和（杂）芳基卤化物合成酮。吡啶甲酰胺配体的使用是实现转化的关键。使用该反应，即使以克为单位，杂芳基酮以及二芳基酮也以良好至优异的产率合成。密度泛函理论（DFT）计算的结果支持C–H键激活途径。
• Identification of ABX-1431, a Selective Inhibitor of Monoacylglycerol Lipase and Clinical Candidate for Treatment of Neurological Disorders
  作者：Justin S. Cisar、Olivia D. Weber、Jason R. Clapper、Jacqueline L. Blankman、Cassandra L. Henry、Gabriel M. Simon、Jessica P. Alexander、Todd K. Jones、R. Alan B. Ezekowitz、Gary P. O’Neill、Cheryl A. Grice

  DOI：10.1021/acs.jmedchem.8b00951

  日期：2018.10.25

  of hexafluoroisopropyl carbamate-based irreversible inhibitors of MGLL, culminating in a highly potent, selective, and orally available, CNS-penetrant MGLL inhibitor, 28 (ABX-1431). Activity-based protein profiling experiments verify the exquisite selectivity of 28 for MGLL versus other members of the serine hydrolase class. In vivo, 28 inhibits MGLL activity in rodent brain (ED50 = 0.5-1.4 mg/kg)

  丝氨酸水解酶单酰基甘油脂酶（MGLL）将内源性大麻素受体激动剂2-花生四烯酰基甘油（2-AG）和其他单酰基甘油转化为脂肪酸和甘油。MGLL的遗传或药理失活导致中枢神经系统2-AG升高，花生四烯酸和类二十烷酸相应减少，从而产生抗伤害性，抗焦虑和抗神经炎作用，而没有引起直接大麻素受体激动剂的全部精神活性作用。在这里，我们报告了基于六氟异丙基氨基甲酸酯的MGLL不可逆抑制剂的优化，最终形成了一种高效，选择性和口服的CNS渗透性MGLL抑制剂28（ABX-1431）。基于活性的蛋白质谱分析实验证明了MGLL与丝氨酸水解酶类别的其他成员相比具有28的出色选择性。在体内，28在鼠福尔马林疼痛模型中抑制了啮齿动物大脑中的MGLL活性（ED50 = 0.5-1.4 mg / kg），增加了大脑2-AG的浓度，并抑制了疼痛行为。ABX-1431（28）目前正在人类临床试验中进行评估。
• [EN] CARBAMATE COMPOUNDS AND OF MAKING AND USING SAME<br/>[FR] COMPOSÉS DE CARBAMATE ET LEUR PRÉPARATION ET UTILISATION
  申请人：ABIDE THERAPEUTICS

  公开号：WO2013103973A1

  公开（公告）日：2013-07-11

  This disclosure provides compounds and compositions which may be modulators of MAGL and/or ABHD6 and their use as medicinal agents, processes for their preparation, and pharmaceutical compositions that include disclosed compunds as at least one active agent. The disclosure also provides for method of treating a patient in need thereof, where the patient is suffering from indications such as pain, solid tumor cancer and/or obesity comprising administering a disclosed compound or composition.

  本公开提供了可能是MAGL和/或ABHD6的调节剂的化合物和组合物，以及它们作为药用剂的用途，它们的制备过程，以及包括所公开化合物作为至少一种活性剂的药物组合物。该公开还提供了一种治疗有需要的患者的方法，其中患者患有疼痛、实体肿瘤癌和/或肥胖等症状，包括给予公开的化合物或组合物。
• [EN] SUBSTITUTED QUINOXALINE DERIVATIVES<br/>[FR] DÉRIVÉS DE QUINOXALINE SUBSTITUÉS
  申请人：SELVITA S A

  公开号：WO2016180536A1

  公开（公告）日：2016-11-17

  The present invention relates to substituted quinoxaline derivatives. These compounds are useful for the prevention and/or treatment of several medical conditions including hyperproliferative disorders and diseases.

  本发明涉及取代喹喔啉衍生物。这些化合物对预防和/或治疗包括过度增殖性疾病在内的多种医疗状况具有用处。