indan-1,2-dione-2-oxime | 15028-10-1

• 物质功能分类: 化学试剂 - 有机试剂 - 肟
• 分子结构分类: 有机化合物 - 苯类化合物 - 茚满类
• 英文名称: indan-1,2-dione-2-oxime
• 英文别名: 1,2-indandione-2-oxime；2-Oximino-1-indanone；2-hydroxyimino-3H-inden-1-one
• CAS: 15028-10-1
• 化学式: C₉H₇NO₂
• mdl: MFCD00082993
• 分子量: 161.16
• InChiKey: CWEXMSPEUDRDPH-UHFFFAOYSA-N

物化性质

• 熔点：
  209 °C (dec.)(lit.)
• 沸点：
  345.9±35.0 °C(Predicted)
• 密度：
  1.34±0.1 g/cm3(Predicted)

计算性质

• 辛醇/水分配系数(LogP)：
  1.7
• 重原子数：
  12
• 可旋转键数：
  0
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.111
• 拓扑面积：
  49.7
• 氢给体数：
  1
• 氢受体数：
  3

安全信息

• 危险品标志：
  Xi
• 危险类别码：
  R36/37/38
• WGK Germany：
  3
• 海关编码：
  2928000090
• 安全说明：
  S26,S36
• 储存条件：
  应将产品存储在阴凉处，并保持容器密封，在干燥、通风良好的环境中存放。

SDS

Material Safety Data Sheet

---

Section 1. Identification of the substance
Product Name: 2-(Hydroxyimino)-2,3-dihydro-1H-inden-1-one
Synonyms:

---

Section 2. Hazards identification
Harmful by inhalation, in contact with skin, and if swallowed.
H315: Causes skin irritation
H319: Causes serious eye irritation
H335: May cause respiratory irritation
P261: Avoid breathing dust/fume/gas/mist/vapours/spray
P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present
and easy to do – continue rinsing

---

Section 3. Composition/information on ingredients.
Ingredient name: 2-(Hydroxyimino)-2,3-dihydro-1H-inden-1-one
CAS number: 15028-10-1

---

Section 4. First aid measures
Skin contact: Immediately wash skin with copious amounts of water for at least 15 minutes while removing
contaminated clothing and shoes. If irritation persists, seek medical attention.
Immediately wash skin with copious amounts of water for at least 15 minutes. Assure adequate
Eye contact:
flushing of the eyes by separating the eyelids with fingers. If irritation persists, seek medical
attention.
Inhalation: Remove to fresh air. In severe cases or if symptoms persist, seek medical attention.
Ingestion: Wash out mouth with copious amounts of water for at least 15 minutes. Seek medical attention.

---

Section 5. Fire fighting measures
In the event of a fire involving this material, alone or in combination with other materials, use dry
powder or carbon dioxide extinguishers. Protective clothing and self-contained breathing apparatus
should be worn.

---

Section 6. Accidental release measures
Personal precautions: Wear suitable personal protective equipment which performs satisfactorily and meets local/state/national
standards.
Respiratory precaution: Wear approved mask/respirator
Hand precaution: Wear suitable gloves/gauntlets
Skin protection: Wear suitable protective clothing
Eye protection: Wear suitable eye protection
Methods for cleaning up: Mix with sand or similar inert absorbent material, sweep up and keep in a tightly closed container
for disposal. See section 12.
Environmental precautions: Do not allow material to enter drains or water courses.

---

Section 7. Handling and storage
Handling: This product should be handled only by, or under the close supervision of, those properly qualified
in the handling and use of potentially hazardous chemicals, who should take into account the fire,
health and chemical hazard data given on this sheet.
Storage: Store in closed vessels.

---

Section 8. Exposure Controls / Personal protection
Engineering Controls: Use only in a chemical fume hood.
Personal protective equipment: Wear laboratory clothing, chemical-resistant gloves and safety goggles.
General hydiene measures: Wash thoroughly after handling. Wash contaminated clothing before reuse.

---

Section 9. Physical and chemical properties
Appearance: Not specified
No data
Boiling point:
Melting point: No data
Flash point: No data
Density: No data
Molecular formula: C9H7NO2
Molecular weight: 161.2

---

Section 10. Stability and reactivity
Conditions to avoid: Heat, flames and sparks.
Materials to avoid: Oxidizing agents.
Possible hazardous combustion products: Carbon monoxide, nitrogen oxides.

---

Section 11. Toxicological information
No data.

---

Section 12. Ecological information
No data.

---

Section 13. Disposal consideration
Arrange disposal as special waste, by licensed disposal company, in consultation with local waste
disposal authority, in accordance with national and regional regulations.

---

Section 14. Transportation information
Non-harzardous for air and ground transportation.

---

Section 15. Regulatory information
No chemicals in this material are subject to the reporting requirements of SARA Title III, Section
302, or have known CAS numbers that exceed the threshold reporting levels established by SARA
Title III, Section 313.

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  indan-1,2-dione-2-oxime 在 乙醚 、 五氯化磷 作用下， 生成 2-(氰基甲基)苯甲酸
  参考文献：
  名称：

  Haworth; Pink, Journal of the Chemical Society, 1925, vol. 127, p. 1370

  摘要：

  DOI：
• 作为产物：
  描述：

  1-茚酮 在 盐酸 、 亚硝酸异戊酯 作用下， 以 甲醇 、 水 为溶剂， 反应 1.0h， 以72%的产率得到indan-1,2-dione-2-oxime
  参考文献：
  名称：

  通过 Pd 催化氢化有效非对映选择性合成 cis-2-amino-1-indanol 衍生物和 cis- and trans-1-amino-2-indanol

  摘要：

  摘要 (±)-顺式-2-氨基-1-茚满醇是在25°C、10% Pd/C催化的氢化条件下从乙醇中的1,2-茚满二酮-2-肟非对映选择性合成的。在相同加氢条件下，茚满环脂肪族或芳香族部分具有一个和/或两个给电子基团的1,2-茚满酮-2-肟及其衍生物非对映选择性还原为外消旋顺式-2-氨基-1-茚满醇衍生品。从 1,2-茚满二酮-1-肟中，在 10% Pd/BaSO 4催化剂上在乙醇中于 25°C 获得(±)-反式-1-氨基-2-茚满醇。相比之下，10% Pd/BaSO 4催化的乙醇加氢反应在 45 °C 下得到顺式-1-hydroxyamino-2-indanol 从 1,2-indanedion-1-oxime，然后还原形成 (±)- cis -1-amino-2-indanol。β-氨基茚满醇的非对映选择性取决于钯催化剂、反应温度和反应介质的 pH 值。

  DOI：

  10.1080/00397911.2021.1989595

文献信息

• Cu-catalyzed coupling of indanone oxime acetates with thiols to 2,3-difunctionalized indenones
  作者：Yuanyuan Fu、Xueyan Zhao、Dengfeng Chen、Jinyue Luo、Shenlin Huang

  DOI：10.1039/d1cc04167c

  日期：——

  A Cu-catalyzed coupling reaction of indanone oxime acetates with thiols has been developed for the synthesis of 2,3-functionalized 1-indenones. This protocol has several features including easy mild reaction conditions, stabilized enamine products, good tolerance of functional groups, and no external oxidants. This reaction enables direct derivatization on the indanone ring to provide valuable functionalized

  茚满酮肟乙酸酯与硫醇的 Cu 催化偶联反应已被开发用于合成 2,3-功能化 1-茚酮。该协议有几个特点，包括容易温和的反应条件、稳定的烯胺产品、良好的官能团耐受性和无外部氧化剂。该反应能够在茚满酮环上直接衍生化，从而在室温下提供有价值的官能化茚酮。
• Rapid Construction of Complex 2-Pyrrolines through Lewis Acid-Catalyzed, Sequential Three-Component Reactions via <i>in Situ</i>-Generated 1-Azaallyl Cations
  作者：Marcel Schlegel、Christoph Schneider

  DOI：10.1021/acs.orglett.8b01205

  日期：2018.5.18

  The first Sc(OTf)3-catalyzed dehydration of 2-hydroxy oxime ethers to generate benzylic stabilized 1-azaallyl cations, which are captured by 1,3-carbonyls, is described. A subsequent addition of primary amines in a sequential three-component reaction affords highly substituted and densely functionalized tetrahydroindeno[2,1-b]pyrroles as single diastereomers with up to quantitative yield. Thus, three

  描述了2-羟基肟醚的第一Sc（OTf）3催化脱水以生成苄基稳定的1-氮杂烯丙基阳离子，其被1，3-羰基捕获。随后在顺序的三组分反应中添加伯胺可提供高取代度和高密度官能化的四氢茚并[2,1- b ]吡咯作为单一非对映异构体，并具有最高的定量收率。因此，在一锅操作中生成了三个新的σ键和两个相邻的四元立体生成中心。
• Bicyclic pyrrolyl amides as glucogen phosphorylase inhibitors
  申请人：——

  公开号：US20030232875A1

  公开（公告）日：2003-12-18

  Heterocyclic amide derivatives, of formula (I): wherein —X-Y-Z- is selected from —S—CR 4 ═CR 5 —, —CR 4 ═CR 5 —S—, —O—CR 4 ═CR 5 —, —CR 4 ═CR 5 —O—, —N═CR 4 —S—, —S—CR 4 ═N—, —NR 6 —CR 4 ═CR 5 — and —CR 4 ═CR 5 —NR 6 —; or a pharmaceutically acceptable salt or an in vivo hydrolysable ester thereof; (with provisos); possess glycogen phosphorylase inhibitory activity and accordingly have value in the treatment of disease states associated with increased glycogen phosphorylase activity. Processes for the manufacture of said heterocyclic amide derivatives and pharmaceutical compositions containing them are described.

  杂环酰胺衍生物的化学式（I）：其中—X-Y-Z-选择自—S—CR4═CR5—，—CR4═CR5—S—，—O—CR4═CR5—，—CR4═CR5—O—，—N═CR4—S—，—S—CR4═N—，—NR6—CR4═CR5—和—CR4═CR5—NR6—；或其药学上可接受的盐或体内可水解酯；（附带条件）；具有糖原磷酸化酶抑制活性，因此在治疗与糖原磷酸化酶活性增加相关的疾病状态中具有价值。描述了制备所述杂环酰胺衍生物和含有它们的药物组合物的方法。
• [EN] INDOLAMID DERIVATIVES WHICH POSSESS GLYCOGENPHOSPHORYLASE INHIBITORY ACTIVITY<br/>[FR] DERIVES D'INDOLAMIDE PRESENTANT UNE ACTIVITE INHIBITRICE DE LA GLYCOGENE PHOSPHORYLASE
  申请人：ASTRAZENECA AB

  公开号：WO2003074484A1

  公开（公告）日：2003-09-12

  Heterocyclic amides of formula (1) wherein: is a single or double bond;A is phenylene or heteroarylene;m is 0, 1 or 2;n is 0, 1 or 2;R1 is selected from for example halo, nitro, cyano, hydroxy, carboxy; r is 1 or 2; Y is -NR2R3 or -OR3;R2 and R3 are selected from for example hydrogen, hydroxy, aryl, heterocyclyl and C 1-4 alkyl(optionally substituted by 1 or 2 R8 groups);R4 is selected from for example hydrogen, halo, nitro, cyano, hydroxy, C 1-4 alkyl, and C 1-4 alkanoyl; R8 is selected from for example hydroxy, -COCOOR9, -C(O)N(R9)(R10), -NHC(O)R9 , (R9)(R10)N- and -COOR9 ;R9 and R10 are selected from for example hydrogen, hydroxy, C 1-4 alkyl (optionally substituted by 1 or 2 R13 );R13 is selected from hydroxy, halo, trihalomethyl and C 1-4 alkoxy;or a pharmaceutically acceptable salt or pro-drug thereof; possess glycogen phosphorylase inhibitory activity and accordingly have value in the treatment of disease states associated with increased glycogen phosphorylase activity. Processes for the manufacture of said heterocyclic amide derivatives and pharmaceutical compositions containing them are described.

  式（1）中的杂环酰胺，其中：是单键或双键；A是苯基或杂环基；m为0、1或2；n为0、1或2；R1从卤素、硝基、氰基、羟基、羧基等中选择；r为1或2；Y为-NR2R3或-OR3；R2和R3从氢、羟基、芳基、杂环基和C1-4烷基（可选地由1或2个R8基取代）中选择；R4从氢、卤素、硝基、氰基、羟基、C1-4烷基和C1-4烷酰基中选择；R8从羟基、-COCOOR9、-C（O）N（R9）（R10）、-NHC（O）R9、（R9）（R10）N-和-COOR9中选择；R9和R10从氢、羟基、C1-4烷基（可选地由1或2个R13基取代）中选择；R13从羟基、卤素、三卤甲基和C1-4烷氧基中选择；或其药学上可接受的盐或前药；具有糖原磷酸化酶抑制活性，因此在治疗与糖原磷酸化酶活性增加相关的疾病状态中具有价值。描述了制备所述杂环酰胺衍生物的方法以及含有它们的药物组合物。
• Lewis acid-catalyzed Friedel–Crafts reactions toward highly versatile, α-quaternary oxime ethers
  作者：Marcel Schlegel、Christoph Schneider

  DOI：10.1039/c8cc06823b

  日期：——

  The synthesis of all-carbon-substituted, quaternary stereocenters through Lewis acid-catalyzed Friedel–Crafts alkylation of cyclic and acyclic 2-hydroxy oxime ethers proceeds under mild reaction conditions and with high yields. Moreover, the oxime ether moiety can be easily manipulated into various functional groups through subsequent modifications.

  通过路易斯酸催化的环状和无环2-羟基肟醚的弗里德-克拉夫茨烷基化反应，可以在温和的反应条件下以高收率进行全碳取代的季立体中心的合成。而且，肟醚部分可以通过随后的修饰容易地操纵成各种官能团。