邻苯二甲酸二丁酯-3,4,5,6-d4 | 93952-11-5

• 物质功能分类: 化学试剂 - 氘代试剂
• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 中文名称: 邻苯二甲酸二丁酯-3,4,5,6-d4
• 中文别名: 氘代邻苯二价酸二正丁酯；邻苯二甲酸二正丁酯-d4；氘代邻苯二甲酸二丁酯
• 英文名称: di-n-butyl phthalate-3,4,5,6-D4
• 英文别名: dibutyl phthalate-3,4,5,6-d₄；d₄-DBP；Di-n-butyl phthalate-d4；dibutyl 3,4,5,6-tetradeuteriobenzene-1,2-dicarboxylate
• CAS: 93952-11-5
• 化学式: C₁₆H₂₂O₄
• 分子量: 282.317
• InChiKey: DOIRQSBPFJWKBE-ULDPCNCHSA-N

物化性质

• 熔点：
  −35 °C(lit.)
• 沸点：
  340 °C(lit.)
• 密度：
  1.058 g/mL at 25 °C
• 闪点：
  340 °F
• 溶解度：
  可溶于氯仿（少许）、甲醇（少许）
• 稳定性/保质期：
  避免接触强氧化剂、酸（如盐酸盐、氯）等物质。

计算性质

• 辛醇/水分配系数(LogP)：
  4.7
• 重原子数：
  20
• 可旋转键数：
  10
• 环数：
  1.0
• sp3杂化的碳原子比例：
  0.5
• 拓扑面积：
  52.6
• 氢给体数：
  0
• 氢受体数：
  4

安全信息

• 危险品标志：
  T,N
• 安全说明：
  S45,S53,S61
• 危险类别码：
  R62,R50,R61
• WGK Germany：
  2,3
• 危险品运输编号：
  UN 3082 9/PG 3

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : Dibutyl phthalate-3,4,5,6-d4
: Fluka
Index-No. : 607-318-00-4
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No. : 93952-11-5

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Reproductive toxicity (Category 1B), H360Df
Acute aquatic toxicity (Category 1), H400
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
R61
R62
N Dangerous for the R50
environment
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal word Danger
Hazard statement(s)
H360Df May damage the unborn child. Suspected of damaging fertility.
Very toxic to aquatic life.
Precautionary statement(s)
Obtain special instructions before use.
Avoid release to the environment.
P308 + P313 IF exposed or concerned: Get medical advice/ attention.
Supplemental Hazard none
Statements
Restricted to professional users.
Other hazards - none

---

SECTION 3: Composition/information on ingredients
Substances
Chemical characterization : Isotopically labeled
Synonyms : Di-n-butyl phthalate-d4
Di-n-butyl phthalate-d4
Formula : C16D4H18O4
Molecular Weight : 282,37 g/mol
CAS-No. : 93952-11-5
Index-No. : 607-318-00-4
Hazardous ingredients according to Regulation (EC) No 1272/2008
Component Classification Concentration
Dibutyl phthalate-3,4,5,6-d4 Included in the Candidate List of Substances of Very High Concern (SVHC)
according to Regulation (EC) No. 1907/2006 (REACH)
CAS-No. 93952-11-5 Repr. 1B; Aquatic Acute 1; <= 100 %
Index-No. 607-318-00-4 H360Df, H400
Hazardous ingredients according to Directive 1999/45/EC
Component Classification Concentration
Dibutyl phthalate-3,4,5,6-d4 Included in the Candidate List of Substances of Very High Concern (SVHC)
according to Regulation (EC) No. 1907/2006 (REACH)
CAS-No. 93952-11-5 T, N, Repr.Cat.2, Repr.Cat.3, <= 100 %
Index-No. 607-318-00-4 R61 - R50 - R62
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Flush eyes with water as a precaution.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation.
Evacuate personnel to safe areas.
For personal protection see section 8.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the
environment must be avoided.
Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid exposure - obtain special instructions before use.Avoid inhalation of vapour or mist.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Store under inert gas. hygroscopic
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup
to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into
the environment must be avoided.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: liquid
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing Melting point/range: -35 °C - lit.
point
f) Initial boiling point and 340 °C - lit.
boiling range
g) Flash point no data available
h) Evapouration rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density no data available
n) Water solubility no data available
o) Partition coefficient: n- no data available
octanol/water
p) Auto-ignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
no data available
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
Presumed human reproductive toxicant
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available
Nausea, Dizziness, Headache

---

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
Very toxic to aquatic life.

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: 3082 IMDG: 3082 IATA: 3082
UN proper shipping name
ADR/RID: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Dibutyl phthalate-
3,4,5,6-d4)
IMDG: ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID, N.O.S. (Dibutyl phthalate-
3,4,5,6-d4)
IATA: Environmentally hazardous substance, liquid, n.o.s. (Dibutyl phthalate-3,4,5,6-d4)
Transport hazard class(es)
ADR/RID: 9 IMDG: 9 IATA: 9
Packaging group
ADR/RID: III IMDG: III IATA: III
Environmental hazards
ADR/RID: yes IMDG Marine pollutant: yes IATA: yes
Special precautions for user
no data available

---

SECTION 15: Regulatory information
This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Safety, health and environmental regulations/legislation specific for the substance or mixture
Authorisations and/or restrictions on use
Dibutyl phthalate-3,4,5,6-d4 CAS-No.: 93952-11-5
Candidate List of Substances of Very High Concern for Authorisation
Toxic for reproduction (article 57c)
ED/67/2008
Dibutyl phthalate-3,4,5,6-d4 CAS-No.: 93952-11-5
EU. REACH - Annex XIV: List of substances subject to authorisation
Toxic for reproduction (category 1B)
Sunset Date: 21.02.2015
Exempted (Categories of) Uses: Uses in the immediate packaging of medicinal products covered under
Chemical Safety Assessment

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为产物：
  描述：

  氘代邻二甲苯-d10 在 4-二甲氨基吡啶 、 potassium permanganate 、 水 、 盐酸-N-乙基-Nˊ-(3-二甲氨基丙基)碳二亚胺 作用下， 以 二氯甲烷 、 异丁醇 为溶剂， 反应 1.0h， 生成 邻苯二甲酸二丁酯-3,4,5,6-d4
  参考文献：
  名称：

  An efficient and general method for the synthesis of stable isotope deuterium labeled phthalate esters

  摘要：

  本文介绍了一种高效且通用的合成氘标记邻苯二甲酸酯的方法，该方法使用廉价且易得的氘标记o-二甲苯作为起始材料，实现了高同位素富集度和优异的化学纯度。通过1H NMR和质谱法确认了其结构和同位素丰度。这些氘标记邻苯二甲酸酯可作为分析参考标准，用于检测土壤、水、食品、塑料制品等中的增塑剂残留。

  DOI：

  10.1002/jlcr.3930

文献信息

• Combination of Solid-Phase Micro-Extraction and Direct Analysis in Real Time-Fourier Transform Ion Cyclotron Resonance Mass Spectrometry for Sensitive and Rapid Analysis of 15 Phthalate Plasticizers in Beverages
  作者：Mengxi Wu、Haoyang Wang、Guoqing Dong、Brian D. Musselman、Charles C. Liu、Yinlong Guo

  DOI：10.1002/cjoc.201400564

  日期：2015.2

  A method for rapid identification and quantification of phthalate plasticizers in beverages was developed. A number of 15 phthalate plasticizers which covered all the phthalates concerned in the US Consumer Product Safety Improvement Act (CPSIA), European Union legislations and Chinese national standards (GB) were analyzed. By a combined solid‐phase micro‐extraction (SPME) and direct analysis in real

  开发了一种快速鉴定和定量饮料中邻苯二甲酸酯类增塑剂的方法。分析了15种邻苯二甲酸酯增塑剂，它们涵盖了《美国消费品安全改进法》（CPSIA），欧盟立法和中国国家标准（GB）中所有与邻苯二甲酸酯有关的物质。通过固相微萃取（SPME）和实时质谱法（DART-MS）的直接分析相结合，邻苯二甲酸盐的浓度低于ng·mL -1可以在短时间内定性和定量分析血药浓度。傅立叶变换离子回旋共振质谱（FT-ICR-MS）自然提供的超高分辨率和准确的质量测量能力可最大程度地减少基质干扰，从而无需复杂的样品处理或复杂样品即可评估复杂基质中的邻苯二甲酸盐准备。定量限（LOQ）估计为0.3-5.0 ng·mL -1，低于欧盟法规（2007/19 / EC）在食品，饮料，食品包装中规定的最大残留限量（MRL）和玩具（0.3–30 ng·mL -1）。这种快速且易于使用的SPME-DART-FT-ICR-MS方法为饮料和水样
• An efficient and general method for the synthesis of stable isotope deuterium labeled phthalate esters
  作者：Zhongjie Xu、Cheng Zhao、Wen Sun、Wen Lei、Zuming Hu

  DOI：10.1002/jlcr.3930

  日期：2021.8

  An efficient and general synthetic route of deuterium-labeled phthalate esters is described with high isotopic enrichment and excellent chemical purities using inexpensive and readily available o-xylene-D10 as labeled starting material. The structures and isotope-abundance were confirmed via 1H NMR and mass spectrometry. These deuterium labeled phthalate esters can be used as analytical reference standards for the detection of plasticizer residues in soil, water, food, plastic products, etc.

  本文介绍了一种高效且通用的合成氘标记邻苯二甲酸酯的方法，该方法使用廉价且易得的氘标记o-二甲苯作为起始材料，实现了高同位素富集度和优异的化学纯度。通过1H NMR和质谱法确认了其结构和同位素丰度。这些氘标记邻苯二甲酸酯可作为分析参考标准，用于检测土壤、水、食品、塑料制品等中的增塑剂残留。