单环己基邻苯二甲酸酯 | 7517-36-4

• 物质功能分类: 分析化学 - 标准品 - 农业和环境标准品
• 分子结构分类: 有机化合物 - 苯类化合物 - 苯和取代衍生物
• 中文名称: 单环己基邻苯二甲酸酯
• 中文别名: 邻苯二甲酸单环己酯
• 英文名称: monocyclohexyl phthalate
• 英文别名: Phthalsaeure-monocyclohexylester；2-cyclohexyloxycarbonylbenzoic acid
• CAS: 7517-36-4
• 化学式: C₁₄H₁₆O₄
• 分子量: 248.279
• InChiKey: PMDKYLLIOLFQPO-UHFFFAOYSA-N

物化性质

• 熔点：
  89-91°C
• 沸点：
  410.2±28.0 °C(Predicted)
• 密度：
  1.23±0.1 g/cm3(Predicted)
• 溶解度：
  可溶于氯仿（少许）、甲醇（少许）
• 保留指数：
  2117

计算性质

• 辛醇/水分配系数(LogP)：
  2.9
• 重原子数：
  18
• 可旋转键数：
  4
• 环数：
  2.0
• sp3杂化的碳原子比例：
  0.43
• 拓扑面积：
  63.6
• 氢给体数：
  1
• 氢受体数：
  4

安全信息

• 危险品标志：
  Xi
• 安全说明：
  S26,S36/37/39
• 危险类别码：
  R36/37/38
• WGK Germany：
  3

SDS

---

SECTION 1: Identification of the substance/mixture and of the company/undertaking
Product identifiers
Product name : mono-Cyclohexyl phthalate
REACH No. : A registration number is not available for this substance as the substance
or its uses are exempted from registration, the annual tonnage does not
require a registration or the registration is envisaged for a later
registration deadline.
CAS-No. : 7517-36-4
Relevant identified uses of the substance or mixture and uses advised against
Identified uses : Laboratory chemicals, Manufacture of substances

---

SECTION 2: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Skin irritation (Category 2), H315
Eye irritation (Category 2), H319
Specific target organ toxicity - single exposure (Category 3), Respiratory system, H335
For the full text of the H-Statements mentioned in this Section, see Section 16.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Xi Irritant R36/37/38
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal word Warning
Hazard statement(s)
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
Precautionary statement(s)
P261 Avoid breathing vapours.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
Supplemental Hazard none
Statements
Other hazards - none

---

SECTION 3: Composition/information on ingredients
Substances
Synonyms : Phthalic acid monocyclohexyl ester
1,2-Benzenedicarboxylic acid 1-cyclohexyl ester
Formula : C14H16O4
Molecular Weight : 248,27 g/mol
CAS-No. : 7517-36-4
Hazardous ingredients according to Regulation (EC) No 1272/2008
Component Classification Concentration
mono-Cyclohexyl phthalate
CAS-No. 7517-36-4 Skin Irrit. 2; Eye Irrit. 2; STOT <= 100 %
SE 3; H315, H319, H335
Hazardous ingredients according to Directive 1999/45/EC
Component Classification Concentration
mono-Cyclohexyl phthalate
CAS-No. 7517-36-4 Xi, R36/37/38 <= 100 %
For the full text of the H-Statements and R-Phrases mentioned in this Section, see Section 16

---

SECTION 4: First aid measures
Description of first aid measures
General advice
Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled
If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
In case of skin contact
Wash off with soap and plenty of water. Consult a physician.
In case of eye contact
Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed
Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in
section 11
Indication of any immediate medical attention and special treatment needed
no data available

---

SECTION 5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available

---

SECTION 6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation.
Evacuate personnel to safe areas.
For personal protection see section 8.
Environmental precautions
Do not let product enter drains.
Methods and materials for containment and cleaning up
Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed
containers for disposal.
Reference to other sections
For disposal see section 13.

---

SECTION 7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
For precautions see section 2.2.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place. Containers which are
opened must be carefully resealed and kept upright to prevent leakage.
Recommended storage temperature: 2 - 8 °C
Store under inert gas.
Specific end use(s)
Apart from the uses mentioned in section 1.2 no other specific uses are stipulated

---

SECTION 8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and
at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested
and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique
(without touching glove's outer surface) to avoid skin contact with this product. Dispose of
contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and
the standard EN 374 derived from it.
Body Protection
impervious clothing, The type of protective equipment must be selected according to the
concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator
with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup
to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air
respirator. Use respirators and components tested and approved under appropriate government
standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Do not let product enter drains.

---

SECTION 9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: liquid
b) Odour no data available
c) Odour Threshold no data available
d) pH no data available
e) Melting point/freezing Melting point/range: 89 - 91 °C
point
f) Initial boiling point and no data available
boiling range
g) Flash point no data available
h) Evapouration rate no data available
i) Flammability (solid, gas) no data available
j) Upper/lower no data available
flammability or
explosive limits
k) Vapour pressure no data available
l) Vapour density no data available
m) Relative density no data available
n) Water solubility no data available
o) Partition coefficient: n- log Pow: 3,102
octanol/water
p) Auto-ignition no data available
temperature
q) Decomposition no data available
temperature
r) Viscosity no data available
s) Explosive properties no data available
t) Oxidizing properties no data available
Other safety information
no data available

---

SECTION 10: Stability and reactivity
Reactivity
no data available
Chemical stability
Stable under recommended storage conditions.
Possibility of hazardous reactions
no data available
Conditions to avoid
no data available
Incompatible materials
Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
In the event of fire: see section 5

---

SECTION 11: Toxicological information
Information on toxicological effects
Acute toxicity
no data available
Skin corrosion/irritation
no data available
Serious eye damage/eye irritation
no data available
Respiratory or skin sensitisation
no data available
Germ cell mutagenicity
no data available
Carcinogenicity
IARC: No component of this product present at levels greater than or equal to 0.1% is identified as
probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity
no data available
Specific target organ toxicity - single exposure
no data available
Specific target organ toxicity - repeated exposure
no data available
Aspiration hazard
no data available
Additional Information
RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been
thoroughly investigated.

---

SECTION 12: Ecological information
Toxicity
no data available
Persistence and degradability
no data available
Bioaccumulative potential
no data available
Mobility in soil
no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects
no data available

---

SECTION 13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging
Dispose of as unused product.

---

SECTION 14: Transport information
UN number
ADR/RID: - IMDG: - IATA: -
UN proper shipping name
ADR/RID: Not dangerous goods
IMDG: Not dangerous goods
IATA: Not dangerous goods
Transport hazard class(es)
ADR/RID: - IMDG: - IATA: -
Packaging group
ADR/RID: - IMDG: - IATA: -
Environmental hazards
ADR/RID: no IMDG Marine pollutant: no IATA: no
Special precautions for user
no data available

---

---

SECTION 15 - REGULATORY INFORMATION
N/A

---

SECTION 16 - ADDITIONAL INFORMATION
N/A

反应信息

• 作为反应物：
  描述：

  单环己基邻苯二甲酸酯 在 吡啶 、 氯化亚砜 、 苯 作用下， 生成 N-((1R)-menthyl)-phthalamic acid cyclohexyl ester
  参考文献：
  名称：

  Human; Mills, Journal of the Chemical Society, 1949, p. Spl. 77, 79

  摘要：

  DOI：
• 作为产物：
  描述：

  邻苯二甲酸二环己酯 在 水 、 potassium hydroxide 作用下， 以 二甲基亚砜 为溶剂， 反应 3.5h， 以90%的产率得到单环己基邻苯二甲酸酯
  参考文献：
  名称：

  实用的大体积对称二酯选择性单水解：与声化学比较

  摘要：

  我们先前报道的对称二酯的实际选择性单水解的条件已被修改，并应用于大体积对称二酯的选择性单水解。虽然通常认为超声波对两相反应有效，但实际上其作用很小。相反，使用较大比例的极性非质子助溶剂，DMSO和KOH水溶液有助于提高反应速率并提高半酯的收率。反应简单，温和，实用，无需特殊装置。

  DOI：

  10.1016/j.tet.2018.09.051

文献信息

• Dicarboxylic diester, process for producing the same, and refrigerating machine lubricating oil comprising the ester
  申请人：Kawahara Yasuyuki

  公开号：US20050038283A1

  公开（公告）日：2005-02-17

  A diester represented by the formula wherein A represents a cyclohexane ring, cyclohexene ring or benzene ring, X is H or methyl group, R X and R Y are the same or different and each is C3-C18 branched-chain alkyl group, C1-C18 straight-chain alkyl group, C2-C18 straight-chain alkenyl or C3-C18 cycloalkyl, provided that when A is a benzene ring, R X and R Y are different from each other and —COOR X and —COOR Y are attached to two adjacent carbon atoms of the benzene ring, and having the following properties: 1) a total acid number of 0.05 mgKOH/g or less, 2) a sulfated ash content of 10 ppm or less, 3) a sulfur content of 20 ppm or less, 4) a phosphorus content of 20 ppm or less, 5) a peroxide value of 1.0 meq/kg or less, 6) a carbonyl value of 10 or less; 7) a volume resistivity of 1×10 11 Ω·cm or more, 8) a hydroxyl value of 3 mgKOH/g or less, and 9) a water content of 100 ppm or less, a process for preparing the same and a refrigerator lubricating oil comprising the diester.

  由以下公式表示的二酯，其中A代表环己烷环、环己烯环或苯环，X为H或甲基基团，RX和RY相同或不同，且每个均为C3-C18支链烷基基团、C1-C18直链烷基基团、C2-C18直链烯基或C3-C18环烷基，前提是当A为苯环时，RX和RY彼此不同，且—COORX和—COORY连接到苯环的两个相邻碳原子，并具有以下特性：1）总酸值为0.05 mgKOH/g或更低，2）硫酸盐灰分含量为10 ppm或更低，3）硫含量为20 ppm或更低，4）磷含量为20 ppm或更低，5）过氧化值为1.0 meq/kg或更低，6）羰基值为10或更低；7）体积电阻率为1×1011Ω·cm或更高，8）羟值为3 mgKOH/g或更低，9）水含量为100 ppm或更低，制备该二酯的方法以及包含该二酯的制冷剂润滑油。
• [EN] HYDROGENATION OF BENZENE POLYCARBOXYLIC ACIDS OR DERIVATIVES THEREOF<br/>[FR] HYDROGENATION D'ACIDES POLYCARBOXYLIQUES DE BENZENE OU DE LEURS DERIVES
  申请人：EXXONMOBIL CHEM PATENTS INC

  公开号：WO2004046078A1

  公开（公告）日：2004-06-03

  A process for hydrogenating benzenepolycarboxylic acids or derivatives thereof, such as esters and/or anhydrides, by bringing one or more benzenepolycarboxylic acids or one or more derivatives thereof into contact with a hydrogen-containing gas in the presence of one or more catalytically active metal, such as platinum, palladium, ruthenium or mixtures thereof, deposited on a catalyst support comprising one or more ordered mesoporous materials.

  一种用于氢化苯基多羧酸或其衍生物（如酯和/或酐）的方法，包括将一个或多个苯基多羧酸或一个或多个其衍生物与含氢气体接触，在一个或多个催化活性金属的存在下进行，这些金属可以是铂、钯、钌或其混合物，它们被沉积在一个催化剂支撑体上，该支撑体包括一个或多个有序介孔材料。
• Method for hydrogenating organic compounds by means of ru/sio2 catalysts
  申请人：——

  公开号：US20040199033A1

  公开（公告）日：2004-10-07

  In a process for hydrogenating at least one organic compound, the organic compound or compounds is/are brought into contact with a hydrogen-containing gas in the presence of a catalyst which comprises, as active metal, ruthenium either alone or together with at least one further metal of transition group I, VII or VIII of the Periodic Table applied to a support material based on amorphons silicon dioxide and is obtainable by: i) a single or multiple treatment of a support material based on amorphous silicon dioxide with a halogen-free aqueous solution of a low molecular weight ruthenium compound and subsequent drying of the treated support material at below 200° C., ii) reduction of the solid obtained in i) by means of hydrogen at from 100 to 350° C., with step ii) being carried out directly after step i).

  在至少一种有机化合物氢化的过程中，有机化合物或化合物被带入含氢气体中，在催化剂的存在下，该催化剂包括作为活性金属的钌单独或与周期表的I，VII或VIII族过渡金属中的至少一种进一步金属一起应用于基于非晶态二氧化硅的支撑材料，并且可以通过以下方式获得：i）用不含卤素的低分子量钌化合物的水溶液对基于非晶态二氧化硅的支撑材料进行单次或多次处理，并在低于200°C的条件下干燥处理所处理的支撑材料，ii）通过在100°C至350°C的温度下用氢还原i）中得到的固体，其中步骤ii）直接在步骤i）之后进行。
• PROCESS FOR PRODUCING EXPANDABLE STYRENE POLYMER COMPOSITIONS
  申请人：Husemann Wolfram

  公开号：US20110291040A1

  公开（公告）日：2011-12-01

  A composition comprising at least one expandable styrene polymer component and at least one cyclohexanecarboxylic ester and also optionally further components can be processed to mechanically robust foam materials.

  本发明涉及一种组合物，包括至少一种可膨胀苯乙烯聚合物组分和至少一种环己烷羧酸酯，还可以选择性地加入其他组分，可加工成具有机械强度的泡沫材料。
• Transparent resin material containing metal atoms
  申请人：HITACHI, LTD.

  公开号：EP0108985A1

  公开（公告）日：1984-05-23

  A transparent resin material containing metallic atoms (except for alkali metals) which are ionic-bonded to a vitreous polymeric material constituting the substance of said resin material, in an amount of at least 8% by weight based on the total weight of the resin material, said resin material having a transparency of at least 80% in terms of a light transmittance, and a refractive index nD25 of at least 1.55.

  一种透明树脂材料，含有金属原子（碱金属除外），这些金属原子与构成所述树脂材料实质的玻璃质聚合物材料离子键合，含量至少为树脂材料总重量的 8%（按重量计），所述树脂材料的透光率至少为 80%，折射率 nD25 至少为 1.55。