摩熵化学
数据库官网
小程序
打开微信扫一扫
首页 分子通 化学资讯 化学百科 反应查询 关于我们
请输入关键词

2,4-二苯基-丁-3-炔-1,2-二醇 | 58294-83-0

中文名称
2,4-二苯基-丁-3-炔-1,2-二醇
中文别名
——
英文名称
2,4-diphenylbut-3-yne-1,2-diol
英文别名
——
2,4-二苯基-丁-3-炔-1,2-二醇化学式
CAS
58294-83-0
化学式
C16H14O2
mdl
——
分子量
238.286
InChiKey
FGUJDJGKRLVCSK-UHFFFAOYSA-N
BEILSTEIN
——
EINECS
——
  • 物化性质
  • 计算性质
  • ADMET
  • 安全信息
  • SDS
  • 制备方法与用途
  • 上下游信息
  • 反应信息
  • 文献信息
  • 表征谱图
  • 同类化合物
  • 相关功能分类
  • 相关结构分类

物化性质

  • 熔点:
    101-102 °C(Solv: ethyl ether (60-29-7); ligroine (8032-32-4))
  • 沸点:
    448.6±45.0 °C(Predicted)
  • 密度:
    1.22±0.1 g/cm3(Predicted)

计算性质

  • 辛醇/水分配系数(LogP):
    2.3
  • 重原子数:
    18
  • 可旋转键数:
    4
  • 环数:
    2.0
  • sp3杂化的碳原子比例:
    0.12
  • 拓扑面积:
    40.5
  • 氢给体数:
    2
  • 氢受体数:
    2

反应信息

  • 作为反应物:
    描述:
    2,4-二苯基-丁-3-炔-1,2-二醇碳酸氢钠 作用下, 以 乙二醇 为溶剂, 反应 0.17h, 以63%的产率得到3-Iodo-2,4-diphenylfuran
    参考文献:
    名称:
    微波辐照下 PEG 中亲电碘介导的环化:轻松获得高度官能化的呋喃和吡咯
    摘要:
    据报道,在微波辐射下,使用分子碘和碱在固体 PEG 3400 中的混合物作为替代、环保和无毒溶剂,在很短的时间内快速简便地合成高度取代的 β-碘呋喃和 β-碘吡咯。杂环通过简单的后处理程序以良好的收率有效回收,避免了色谱纯化。
    DOI:
    10.1055/s-0031-1291012
  • 作为产物:
    描述:
    2-羟基苯乙酮苯乙炔正丁基锂 、 lithium bromide 作用下, 以 四氢呋喃 为溶剂, 以97%的产率得到2,4-二苯基-丁-3-炔-1,2-二醇
    参考文献:
    名称:
    Ç -季炔glycinols经由钴络合炔二醇的Ritter反应†
    摘要:
    提出了一种基于乙腈与钴配合的炔二醇的Ritter反应的C-季炔基甘氨酸的新方法。通过酸如H 2 SO 4或BF 3 ·Et 2促进反应O得到恶唑啉作为反应产物。将它们在氧化条件下进行钴配合物裂解,然后进行酸性水解,得到氨基醇。用于Ritter反应的底物可以很容易地组装,以在两个可变位置引入结构多样性。恶唑啉形成的Ritter反应条件与炔烃末端位置上的一系列取代基相容,从而以中等至良好的产率提供恶唑啉。乙二醇反应中心的甲基,羟甲基和甲硅烷氧基甲基取代基具有良好的耐受性,而该位置的苯基不利于反应。
    DOI:
    10.1039/c7ra03965d
点击查看最新优质反应信息

文献信息

  • Synthesis of Furan-3-carboxylic and 4-Methylene-4,5-dihydrofuran-3-carboxylic Esters by Direct Palladium Iodide Catalyzed Oxidative Carbonylation of 3-Yne-1,2-diol Derivatives
    作者:Bartolo Gabriele、Raffaella Mancuso、Vito Maltese、Lucia Veltri、Giuseppe Salerno
    DOI:10.1021/jo301628n
    日期:2012.10.5
    A variety of 3-yne-1,2-diol derivatives 1, bearing a primary or secondary alcoholic group at C-1, have been efficiently converted into high value added furan-3-carboxylic esters 2 in one step by PdI2/KI-catalyzed direct oxidative carbonylation, carried out in alcoholic media under relatively mild conditions (100 °C under 40 atm of a 4/1 mixture of CO and air). Carbonylated furans 2 were obtained in
    通过PdI 2 / KI一步一步将各种在C-1上带有伯或仲醇基的3-yne-1,2-二醇衍生物1有效地转化为高附加值的呋喃-3-羧酸酯2 -催化的直接氧化羰基化反应,该反应是在酒精介质中,相对温和的条件下进行的(100℃,在40个大气压下,CO和空气的4/1混合物)。通过仅使用氧气作为外部氧化剂,通过连续的5-内挖-杂环-烷氧基羰基化-脱水过程,可以以相当高的分离产率(56-93%)获得羰基化呋喃2。在类似条件下,2-甲基-3-炔-1,2-二醇3带有叔醇基团的化合物,以令人满意的收率(58-70%)提供了4-亚甲基-4,5-二氢呋喃-3-羧酸酯4。
  • Rh(I)‐Catalyzed Decarboxylative Arylation of Alkynyl Cyclic Carbonates: Divergent Access to Substituted <i>α</i> ‐Allenols and 1,3‐Butadienes
    作者:Geetanjali S. Sontakke、Rahul K. Shukla、Chandra M. R. Volla
    DOI:10.1002/adsc.202101064
    日期:2022.2
    Rh(I)-catalyzed decarboxylative arylation of alkynyl cyclic carbonates using commercially available and low-toxic aryl boronic acids has been disclosed. Depending on the nature of the cyclic carbonates, the methodology provides a straightforward platform to access either substituted 2,3-allenols or 1,3-butadiene derivatives. Internal alkynyl cyclic carbonates undergo monoarylation to conveniently afford
    已经公开了使用可商购的和低毒的芳基硼酸对炔基环状碳酸酯进行Rh(I)催化的脱羧芳基化。根据环状碳酸酯的性质,该方法提供了一个直接的平台来获取取代的 2,3-丙二烯醇或 1,3-丁二烯衍生物。内部炔基环状碳酸酯进行单芳基化以方便地提供对芳基和羟基具有高顺式选择性的2,3-丙二烯醇。然而,末端碳酸炔基酯导致形成对两个芳基具有顺式构型的二芳基化1,3-丁二烯衍生物烯基铑 (I) 醇盐中间体。各种官能团的相容性允许开发具有优异区域选择性和良好产率的多种官能化支架库。一系列天然产物的后期转化凸显了芳基化过程的广泛适用性。此外, α-丙二烯醇衍生物向其他有价值的杂环的放大实验和下游转化说明了该协议的功效。
  • Poly(ethylene glycol) as a Reaction Matrix in Platinum- or Gold-Catalyzed Cycloisomerization: A Mechanistic Investigation
    作者:Rosella Spina、Evelina Colacino、Jean Martinez、Frédéric Lamaty
    DOI:10.1002/chem.201203800
    日期:2013.3.18
    Design for diversity: A new catalytic system based on PEG‐3400 and a metal salt (Pt or Au) was designed to efficiently perform a cycloisomerization reaction under microwave irradiation, which gave diverse heterocycles in good to excellent yields, after a precipitation/filtration procedure (see scheme).
    多样性设计:设计了一种基于PEG-3400和金属盐(Pt或Au)的新型催化体系,可以在微波辐射下有效地进行环异构化反应,经过沉淀/过滤后,该杂环化合物可以以优良的产率获得优异的多样化杂环(请参阅方案)。
  • A simple and convenient synthesis of substituted furans and pyrroles by CuCl2-catalyzed heterocyclodehydration of 3-yne-1,2-diols and N-Boc- or N-tosyl-1-amino-3-yn-2-ols
    作者:Bartolo Gabriele、Pierluigi Plastina、Mabel V. Vetere、Lucia Veltri、Raffaella Mancuso、Giuseppe Salerno
    DOI:10.1016/j.tetlet.2010.05.001
    日期:2010.7
    A simple and economical synthesis of substituted furans and pyrroles, by ligand-free CuCl2-catalyzed heterocyclodehydration of readily available 3-yne-1,2-diols and N-Boc- or N-tosyl-1-amino-3-yn-2-ols, respectively, is presented. Reactions are carried out in MeOH at 80–100 °C for 1–24 h and afford the corresponding heterocyclic derivatives in 53–99% isolated yields.
    一种简单经济的取代呋喃和吡咯的合成方法,该方法通过无配体的CuCl 2催化的易获得的3-炔-1,2-二醇和N - Boc-或N-甲苯磺酰基-1-氨基-3-yn-的杂环脱水分别给出了2-ols。反应在MeOH中于80-100°C下进行1-24h,并以53-99%的分离产率得到相应的杂环衍生物。
  • Palladium-catalyzed oxidative heterocyclodehydration-alkoxycarbonylation of 3-yne-1,2-diols: a novel and expedient approach to furan-3-carboxylic esters
    作者:Bartolo Gabriele、Lucia Veltri、Raffaella Mancuso、Pierluigi Plastina、Giuseppe Salerno、Mirco Costa
    DOI:10.1016/j.tetlet.2010.01.054
    日期:2010.3
    furan-3-carboxylic esters 2 is presented, based on palladium-catalyzed direct oxidative carbonylation of readily available 3-yne-1,2-diols 1. The process, corresponding to a sequential combination between a 5-endo-dig heterocyclodehydration step and an oxidative alkoxycarbonylation stage, is catalyzed by PdI2 in conjunction with an excess of KI under relatively mild conditions (100 °C in ROH under 40 atm
    提出了一种新颖且方便的呋喃-3-羧酸酯2的方法,该方法基于钯催化的容易获得的3-炔-1,2-二醇1的直接氧化羰基化作用。的过程中,对应于5-之间的顺序组合内切-挖heterocyclodehydration步骤和氧化烷氧基羰基的阶段,由催化器Pd1 2结合下40具有相对温和的条件(100℃下ROH过量的KI大气压的4:1的CO-空气混合物)。
查看更多

表征谱图

  • 氢谱
    1HNMR
  • 质谱
    MS
  • 碳谱
    13CNMR
  • 红外
    IR
  • 拉曼
    Raman
查看更多图谱数据,请前往“摩熵化学”平台
查看更多图谱数据,请前往“摩熵化学”平台
cnmr
查看更多图谱数据,请前往“摩熵化学”平台
查看更多图谱数据,请前往“摩熵化学”平台
  • 峰位数据
  • 峰位匹配
  • 表征信息
Shift(ppm)
Intensity
查看更多图谱数据,请前往“摩熵化学”平台
Assign
Shift(ppm)
查看更多图谱数据,请前往“摩熵化学”平台
测试频率
样品用量
溶剂
溶剂用量
查看更多图谱数据,请前往“摩熵化学”平台